From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Julius Werner <jwerner@chromium.org>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [regression 3.15-rc3] Resume from s4 broken by 1f81b6d22a5980955b01e08cf27fb745dc9b686f
Date: Tue, 6 May 2014 14:41:26 +0300 [thread overview]
Message-ID: <20140506114126.GB18465@intel.com> (raw)
In-Reply-To: <CAODwPW_57G+Lebe2Xarem9P-L6ePtAaZfy5kpNVEtgkWbc0FWw@mail.gmail.com>
On Mon, May 05, 2014 at 12:32:22PM -0700, Julius Werner wrote:
> Hmmm... very odd. I unfortunately don't have a machine that can easily
> do S4 at hand, but I did test this on an IVB with XHCI_RESET_ON_RESUME
> in S3 (essentially the same code path), and I didn't run into any
> problems.
>
> How exactly does your machine fail on resume? Is it a kernel crash or
> just a hang? Can you try getting some debug output (by setting 'echo N
> > /sys/module/printk/parameters/console_suspend' and trying to catch
> the crash on the screen or a serial line, or maybe through pstore)? I
> really don't see much that could go wrong with this patch, so without
> more info it will be hard to understand your problem.
>
> Also, I noticed that you have two HID devices plugged in during
> suspend. Does it make a difference if you have different devices (e.g.
> a mass storage stick) or none at all?
Looks like it doesn't like it when there's anything plugged into the
"SS" ports. I tried with just a HID keyboard or with just a hub. In
both cases it fails to resume. If I have nothing connected to the "SS"
ports then it resumes just fine.
I managed to catch something with ramoops. Looks like it's hitting
POISON_FREE when trying to delete some list entry.
Oops#1 Part1
<4>[ 106.321876] [<ffffffff8106bb10>] ? kthread_create_on_node+0x210/0x210
<4>[ 106.321878] [<ffffffff8151522c>] ret_from_fork+0x7c/0xb0
<4>[ 106.321879] [<ffffffff8106bb10>] ? kthread_create_on_node+0x210/0x210
<4>[ 106.321879] ---[ end trace f5b8b9411bd5e24b ]---
<6>[ 106.719552] PM: freeze of devices complete after 513.577 msecs
<6>[ 106.720978] PM: late freeze of devices complete after 1.377 msecs
<6>[ 106.723388] PM: noirq freeze of devices complete after 2.378 msecs
<6>[ 106.723795] ACPI: Preparing to enter system sleep state S4
<6>[ 106.727934] PM: Saving platform NVS memory
<4>[ 106.740582] Disabling non-boot CPUs ...
<6>[ 106.743252] kvm: disabling virtualization on CPU1
<6>[ 106.743332] smpboot: CPU 1 is now offline
<6>[ 106.750476] kvm: disabling virtualization on CPU2
<6>[ 106.750518] smpboot: CPU 2 is now offline
<6>[ 106.754634] kvm: disabling virtualization on CPU3
<6>[ 106.754682] smpboot: CPU 3 is now offline
<6>[ 106.758510] kvm: disabling virtualization on CPU4
<6>[ 106.758817] smpboot: CPU 4 is now offline
<6>[ 106.761210] kvm: disabling virtualization on CPU5
<6>[ 106.761253] smpboot: CPU 5 is now offline
<6>[ 106.763567] kvm: disabling virtualization on CPU6
<6>[ 106.763596] smpboot: CPU 6 is now offline
<6>[ 106.765906] kvm: disabling virtualization on CPU7
<6>[ 106.765943] smpboot: CPU 7 is now offline
<6>[ 106.766958] PM: Creating hibernation image:
<6>[ 106.786249] PM: Need to copy 73589 pages
<6>[ 106.768456] PM: Restoring platform NVS memory
<6>[ 106.769104] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.770518] Enabling non-boot CPUs ...
<6>[ 106.771473] x86: Booting SMP configuration:
<6>[ 106.771536] smpboot: Booting Node 0 Processor 1 APIC 0x2
<6>[ 106.783221] CPU1 microcode updated early to revision 0x19, date = 2013-06-13
<6>[ 106.783921] kvm: enabling virtualization on CPU1
<6>[ 106.788131] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.794579] CPU1 is up
<6>[ 106.795048] smpboot: Booting Node 0 Processor 2 APIC 0x4
<6>[ 106.806241] CPU2 microcode updated early to revision 0x19, date = 2013-06-13
<6>[ 106.806963] kvm: enabling virtualization on CPU2
<6>[ 106.811056] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.817512] CPU2 is up
<6>[ 106.817999] smpboot: Booting Node 0 Processor 3 APIC 0x6
<6>[ 106.829157] CPU3 microcode updated early to revision 0x19, date = 2013-06-13
<6>[ 106.829918] kvm: enabling virtualization on CPU3
<6>[ 106.834104] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.840666] CPU3 is up
<6>[ 106.841118] smpboot: Booting Node 0 Processor 4 APIC 0x1
<6>[ 106.852238] CPU4 microcode updated early to revision 0x19, date = 2013-06-13
<6>[ 106.853485] kvm: enabling virtualization on CPU4
<6>[ 106.857868] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.864443] CPU4 is up
<6>[ 106.864911] smpboot: Booting Node 0 Processor 5 APIC 0x3
<6>[ 106.876633] kvm: enabling virtualization on CPU5
<6>[ 106.881188] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.887793] CPU5 is up
<6>[ 106.888264] smpboot: Booting Node 0 Processor 6 APIC 0x5
<6>[ 106.900006] kvm: enabling virtualization on CPU6
<6>[ 106.904526] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.911141] CPU6 is up
<6>[ 106.911605] smpboot: Booting Node 0 Processor 7 APIC 0x7
<6>[ 106.923408] kvm: enabling virtualization on CPU7
<6>[ 106.928161] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x19
<6>[ 106.934883] CPU7 is up
<6>[ 106.957959] ACPI: Waking up from system sleep state S4
<6>[ 106.990680] PM: noirq restore of devices complete after 11.474 msecs
<6>[ 106.993975] PM: early restore of devices complete after 3.024 msecs
<4>[ 107.046519] usb usb3: root hub lost power or was reset
<4>[ 107.046549] usb usb1: root hub lost power or was reset
<4>[ 107.046694] usb usb4: root hub lost power or was reset
<4>[ 107.047230] xhci_hcd 0000:00:14.0: Slot 1 endpoint 2 not removed from BW list!
<4>[ 107.047574] general protection fault: 0000 [#1] PREEMPT SMP
<4>[ 107.047768] usb usb2: root hub lost power or was reset
<4>[ 107.048277]
<4>[ 107.049138] Modules linked in: x86_pkg_temp_thermal coretemp kvm_intel kvm aesni_intel aes_x86_64 glue_helper iTCO_wdt lrw i915 snd_hda_codec_hdmi
<4>[ 107.050193] usb usb5: root hub lost power or was reset
<4>[ 107.050196] usb usb6: root hub lost power or was reset
<7>[ 107.050410] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
<7>[ 107.050453] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
<7>[ 107.051666] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
<7>[ 107.052951] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
<7>[ 107.053018] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
<7>[ 107.053078] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
<7>[ 107.053137] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
<7>[ 107.053197] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
<7>[ 107.054698] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
<7>[ 107.054763] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
<7>[ 107.054830] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
<4>[ 107.057882] snd_hda_codec_realtek hid_generic snd_hda_codec_generic gf128mul snd_hda_intel ablk_helper usbhid cryptd snd_hda_controller hid cfbfillrect snd_hda_codec cfbimgblt snd_hwdep snd_pcm i2c_algo_bit cfbcopyarea snd_timer drm_kms_helper psmouse snd drm lpc_ich pcspkr i2c_i801 mfd_core soundcore wmi evdev
<4>[ 107.062030] CPU: 2 PID: 756 Comm: kworker/u16:2 Tainted: G W 3.15.0-rc4-hang #16
<5>[ 107.062068] sd 0:0:0:0: [sda] Starting disk
<4>[ 107.062992] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0100.2013.0517.0942 05/17/2013
<4>[ 107.063454] Workqueue: events_unbound async_run_entry_fn
<4>[ 107.063892] task: ffff88007cb58000 ti: ffff88007b6fc000 task.ti: ffff88007b6fc000
<4>[ 107.064311] RIP: 0010:[<ffffffff812b2a99>] [<ffffffff812b2a99>] __list_del_entry+0x29/0xd0
<4>[ 107.064942] RSP: 0000:ffff88007b6fdb48 EFLAGS: 00010a83
<4>[ 107.065446] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007b0ba1e8 RCX: dead000000200200
<4>[ 107.065962] RDX: 6b6b6b6b6b6b6b6b RSI: ffff88007cb58750 RDI: ffff88007ac40318
<4>[ 107.066479] RBP: ffff88007b6fdb48 R08: 0000000000000000 R09: 0000000000000001
<4>[ 107.067024] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
<4>[ 107.067528] R13: ffff88007b108000 R14: ffff88007b0ba160 R15: ffff88007ac40318
<4>[ 107.068051] FS: 0000000000000000(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
<4>[ 107.068560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 107.068901] CR2: 0000000000000000 CR3: 0000000001a0e000 CR4: 00000000001407e0
<4>[ 107.069247] Stack:
<4>[ 107.069563] ffff88007b6fdbb8 ffffffff81423d08 0000000000000001 ffff88007cad2290
<4>[ 107.070156] ffff88007b6fdb88 ffffffff812e4815 0000000000001580 0000000000000000
<4>[ 107.070929] ffff88007b6fdbb8 ffff88007b108000 ffff88007b0f7978 ffff88007b0f7978
<4>[ 107.071788] Call Trace:
<4>[ 107.072260] [<ffffffff81423d08>] xhci_mem_cleanup+0x428/0x610
<4>[ 107.072756] [<ffffffff812e4815>] ? pci_disable_msi+0x45/0x50
<4>[ 107.073193] [<ffffffff8141c3e0>] xhci_resume+0x210/0x3a0
<4>[ 107.073618] [<ffffffff8140ba9d>] ? usb_enable_intel_xhci_ports+0xbd/0xd0
<4>[ 107.074245] [<ffffffff8142c266>] xhci_pci_resume+0x36/0x50
<4>[ 107.074837] [<ffffffff8140ac31>] resume_common+0xa1/0x150
<4>[ 107.075460] [<ffffffff812cca00>] ? pci_pm_default_resume+0x50/0x50
<4>[ 107.076103] [<ffffffff8140ad13>] hcd_pci_restore+0x13/0x20
<4>[ 107.076692] [<ffffffff812cca88>] pci_pm_restore+0x88/0xf0
<4>[ 107.077282] [<ffffffff813771ac>] ? device_resume+0x6c/0x1a0
<4>[ 107.077902] [<ffffffff8137677a>] dpm_run_callback+0x3a/0xe0
<4>[ 107.078489] [<ffffffff81514120>] ? _raw_spin_unlock_irq+0x30/0x60
<4>[ 107.079119] [<ffffffff813771ee>] device_resume+0xae/0x1a0
<4>[ 107.079741] [<ffffffff81377301>] async_resume+0x21/0x50
<4>[ 107.080171] [<ffffffff810719c6>] async_run_entry_fn+0x46/0x140
<4>[ 107.080792] [<ffffffff810640e4>] process_one_work+0x1f4/0x530
<4>[ 107.081387] [<ffffffff81064079>] ? process_one_work+0x189/0x530
<4>[ 107.082019] [<ffffffff8106487c>] worker_thread+0x11c/0x370
<4>[ 107.082614] [<ffffffff81064760>] ? rescuer_thread+0x300/0x300
<4>[ 107.083236] [<ffffffff8106bbf4>] kthread+0xe4/0x100
<4>[ 107.083820] [<ffffffff81514120>] ? _raw_spin_unlock_irq+0x30/0x60
<4>[ 107.084441] [<ffffffff8106bb10>] ? kthread_create_on_node+0x210/0x210
<4>[ 107.085032] [<ffffffff8151522c>] ret_from_fork+0x7c/0xb0
<4>[ 107.085652] [<ffffffff8106bb10>] ? kthread_create_on_node+0x210/0x210
<4>[ 107.086251] Code: 1f 00 48 b9 00 01 10 00 00 00 ad de 55 48 8b 17 48 89 e5 48 8b 47 08 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08
<1>[ 107.094025] RIP [<ffffffff812b2a99>] __list_del_entry+0x29/0xd0
<4>[ 107.094738] RSP <ffff88007b6fdb48>
<4>[ 107.095434] ---[ end trace f5b8b9411bd5e24c ]---
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2014-05-06 11:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-05 18:05 [regression 3.15-rc3] Resume from s4 broken by 1f81b6d22a5980955b01e08cf27fb745dc9b686f Ville Syrjälä
2014-05-05 19:32 ` Julius Werner
2014-05-06 11:41 ` Ville Syrjälä [this message]
2014-05-07 13:48 ` Mathias Nyman
2014-05-07 15:02 ` Ville Syrjälä
2014-05-09 8:07 ` Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140506114126.GB18465@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jwerner@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.