diff for duplicates of <20140506144128.GB18474@atomide.com> diff --git a/a/1.txt b/N1/1.txt index 346f40a..39d0a7e 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,4 +1,4 @@ -* Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org> [140506 06:58]: +* Sricharan R <r.sricharan@ti.com> [140506 06:58]: > Now with the crossbar IP in picture, the peripherals do not have the > fixed interrupt lines. Instead they rely on the crossbar irqchip to > allocate and map a free interrupt line to its crossbar input. So replacing @@ -17,12 +17,12 @@ Regards, Tony -> Cc: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> -> Cc: Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org> -> Cc: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org> -> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> -> Signed-off-by: Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org> -> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> +> Cc: Benoit Cousson <bcousson@baylibre.com> +> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> +> Cc: Rajendra Nayak <rnayak@ti.com> +> Cc: Tony Lindgren <tony@atomide.com> +> Signed-off-by: Sricharan R <r.sricharan@ti.com> +> Signed-off-by: Nishanth Menon <nm@ti.com> > --- > [V5] Rebased on 3.15-rc4 and replaced irqs numbers with crossbar > numbers for new peripherals. @@ -43,10 +43,10 @@ Tony > + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; > -> prm: prm@4ae06000 { +> prm: prm at 4ae06000 { > compatible = "ti,dra7-prm"; > @@ -182,10 +182,10 @@ -> sdma: dma-controller@4a056000 { +> sdma: dma-controller at 4a056000 { > compatible = "ti,omap4430-sdma"; > reg = <0x4a056000 0x1000>; > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, @@ -61,7 +61,7 @@ Tony > #dma-channels = <32>; > #dma-requests = <127>; > @@ -194,7 +194,7 @@ -> gpio1: gpio@4ae10000 { +> gpio1: gpio at 4ae10000 { > compatible = "ti,omap4-gpio"; > reg = <0x4ae10000 0x200>; > - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; @@ -70,7 +70,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -205,7 +205,7 @@ -> gpio2: gpio@48055000 { +> gpio2: gpio at 48055000 { > compatible = "ti,omap4-gpio"; > reg = <0x48055000 0x200>; > - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; @@ -79,7 +79,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -216,7 +216,7 @@ -> gpio3: gpio@48057000 { +> gpio3: gpio at 48057000 { > compatible = "ti,omap4-gpio"; > reg = <0x48057000 0x200>; > - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; @@ -88,7 +88,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -227,7 +227,7 @@ -> gpio4: gpio@48059000 { +> gpio4: gpio at 48059000 { > compatible = "ti,omap4-gpio"; > reg = <0x48059000 0x200>; > - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; @@ -97,7 +97,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -238,7 +238,7 @@ -> gpio5: gpio@4805b000 { +> gpio5: gpio at 4805b000 { > compatible = "ti,omap4-gpio"; > reg = <0x4805b000 0x200>; > - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; @@ -106,7 +106,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -249,7 +249,7 @@ -> gpio6: gpio@4805d000 { +> gpio6: gpio at 4805d000 { > compatible = "ti,omap4-gpio"; > reg = <0x4805d000 0x200>; > - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; @@ -115,7 +115,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -260,7 +260,7 @@ -> gpio7: gpio@48051000 { +> gpio7: gpio at 48051000 { > compatible = "ti,omap4-gpio"; > reg = <0x48051000 0x200>; > - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; @@ -124,7 +124,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -271,7 +271,7 @@ -> gpio8: gpio@48053000 { +> gpio8: gpio at 48053000 { > compatible = "ti,omap4-gpio"; > reg = <0x48053000 0x200>; > - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; @@ -133,7 +133,7 @@ Tony > gpio-controller; > #gpio-cells = <2>; > @@ -282,7 +282,7 @@ -> uart1: serial@4806a000 { +> uart1: serial at 4806a000 { > compatible = "ti,omap4-uart"; > reg = <0x4806a000 0x100>; > - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -142,7 +142,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -291,7 +291,7 @@ -> uart2: serial@4806c000 { +> uart2: serial at 4806c000 { > compatible = "ti,omap4-uart"; > reg = <0x4806c000 0x100>; > - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; @@ -151,7 +151,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -300,7 +300,7 @@ -> uart3: serial@48020000 { +> uart3: serial at 48020000 { > compatible = "ti,omap4-uart"; > reg = <0x48020000 0x100>; > - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; @@ -160,7 +160,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -309,7 +309,7 @@ -> uart4: serial@4806e000 { +> uart4: serial at 4806e000 { > compatible = "ti,omap4-uart"; > reg = <0x4806e000 0x100>; > - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -169,7 +169,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -318,7 +318,7 @@ -> uart5: serial@48066000 { +> uart5: serial at 48066000 { > compatible = "ti,omap4-uart"; > reg = <0x48066000 0x100>; > - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; @@ -178,7 +178,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -327,7 +327,7 @@ -> uart6: serial@48068000 { +> uart6: serial at 48068000 { > compatible = "ti,omap4-uart"; > reg = <0x48068000 0x100>; > - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -187,7 +187,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -336,6 +336,7 @@ -> uart7: serial@48420000 { +> uart7: serial at 48420000 { > compatible = "ti,omap4-uart"; > reg = <0x48420000 0x100>; > + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; @@ -195,7 +195,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -344,6 +345,7 @@ -> uart8: serial@48422000 { +> uart8: serial at 48422000 { > compatible = "ti,omap4-uart"; > reg = <0x48422000 0x100>; > + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; @@ -203,7 +203,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -352,6 +354,7 @@ -> uart9: serial@48424000 { +> uart9: serial at 48424000 { > compatible = "ti,omap4-uart"; > reg = <0x48424000 0x100>; > + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; @@ -211,7 +211,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -360,6 +363,7 @@ -> uart10: serial@4ae2b000 { +> uart10: serial at 4ae2b000 { > compatible = "ti,omap4-uart"; > reg = <0x4ae2b000 0x100>; > + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; @@ -219,7 +219,7 @@ Tony > clock-frequency = <48000000>; > status = "disabled"; > @@ -368,7 +372,7 @@ -> timer1: timer@4ae18000 { +> timer1: timer at 4ae18000 { > compatible = "ti,omap5430-timer"; > reg = <0x4ae18000 0x80>; > - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -228,7 +228,7 @@ Tony > ti,timer-alwon; > }; > @@ -376,28 +380,28 @@ -> timer2: timer@48032000 { +> timer2: timer at 48032000 { > compatible = "ti,omap5430-timer"; > reg = <0x48032000 0x80>; > - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -236,7 +236,7 @@ Tony > ti,hwmods = "timer2"; > }; > -> timer3: timer@48034000 { +> timer3: timer at 48034000 { > compatible = "ti,omap5430-timer"; > reg = <0x48034000 0x80>; > - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; @@ -244,7 +244,7 @@ Tony > ti,hwmods = "timer3"; > }; > -> timer4: timer@48036000 { +> timer4: timer at 48036000 { > compatible = "ti,omap5430-timer"; > reg = <0x48036000 0x80>; > - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; @@ -252,7 +252,7 @@ Tony > ti,hwmods = "timer4"; > }; > -> timer5: timer@48820000 { +> timer5: timer at 48820000 { > compatible = "ti,omap5430-timer"; > reg = <0x48820000 0x80>; > - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; @@ -261,7 +261,7 @@ Tony > ti,timer-dsp; > }; > @@ -405,7 +409,7 @@ -> timer6: timer@48822000 { +> timer6: timer at 48822000 { > compatible = "ti,omap5430-timer"; > reg = <0x48822000 0x80>; > - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; @@ -270,7 +270,7 @@ Tony > ti,timer-dsp; > ti,timer-pwm; > @@ -414,7 +418,7 @@ -> timer7: timer@48824000 { +> timer7: timer at 48824000 { > compatible = "ti,omap5430-timer"; > reg = <0x48824000 0x80>; > - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; @@ -279,7 +279,7 @@ Tony > ti,timer-dsp; > }; > @@ -422,7 +426,7 @@ -> timer8: timer@48826000 { +> timer8: timer at 48826000 { > compatible = "ti,omap5430-timer"; > reg = <0x48826000 0x80>; > - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; @@ -288,7 +288,7 @@ Tony > ti,timer-dsp; > ti,timer-pwm; > @@ -431,21 +435,21 @@ -> timer9: timer@4803e000 { +> timer9: timer at 4803e000 { > compatible = "ti,omap5430-timer"; > reg = <0x4803e000 0x80>; > - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -296,7 +296,7 @@ Tony > ti,hwmods = "timer9"; > }; > -> timer10: timer@48086000 { +> timer10: timer at 48086000 { > compatible = "ti,omap5430-timer"; > reg = <0x48086000 0x80>; > - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -304,7 +304,7 @@ Tony > ti,hwmods = "timer10"; > }; > -> timer11: timer@48088000 { +> timer11: timer at 48088000 { > compatible = "ti,omap5430-timer"; > reg = <0x48088000 0x80>; > - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -313,7 +313,7 @@ Tony > ti,timer-pwm; > }; > @@ -453,6 +457,7 @@ -> timer13: timer@48828000 { +> timer13: timer at 48828000 { > compatible = "ti,omap5430-timer"; > reg = <0x48828000 0x80>; > + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; @@ -321,7 +321,7 @@ Tony > status = "disabled"; > }; > @@ -460,6 +465,7 @@ -> timer14: timer@4882a000 { +> timer14: timer at 4882a000 { > compatible = "ti,omap5430-timer"; > reg = <0x4882a000 0x80>; > + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; @@ -329,7 +329,7 @@ Tony > status = "disabled"; > }; > @@ -467,6 +473,7 @@ -> timer15: timer@4882c000 { +> timer15: timer at 4882c000 { > compatible = "ti,omap5430-timer"; > reg = <0x4882c000 0x80>; > + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; @@ -337,7 +337,7 @@ Tony > status = "disabled"; > }; > @@ -474,6 +481,7 @@ -> timer16: timer@4882e000 { +> timer16: timer at 4882e000 { > compatible = "ti,omap5430-timer"; > reg = <0x4882e000 0x80>; > + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; @@ -345,7 +345,7 @@ Tony > status = "disabled"; > }; > @@ -481,7 +489,7 @@ -> wdt2: wdt@4ae14000 { +> wdt2: wdt at 4ae14000 { > compatible = "ti,omap4-wdt"; > reg = <0x4ae14000 0x80>; > - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; @@ -354,7 +354,7 @@ Tony > }; > > @@ -495,14 +503,14 @@ -> dmm@4e000000 { +> dmm at 4e000000 { > compatible = "ti,omap5-dmm"; > reg = <0x4e000000 0x800>; > - interrupts = <0 113 0x4>; @@ -362,7 +362,7 @@ Tony > ti,hwmods = "dmm"; > }; > -> i2c1: i2c@48070000 { +> i2c1: i2c at 48070000 { > compatible = "ti,omap4-i2c"; > reg = <0x48070000 0x100>; > - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; @@ -371,7 +371,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "i2c1"; > @@ -512,7 +520,7 @@ -> i2c2: i2c@48072000 { +> i2c2: i2c at 48072000 { > compatible = "ti,omap4-i2c"; > reg = <0x48072000 0x100>; > - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -380,7 +380,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "i2c2"; > @@ -522,7 +530,7 @@ -> i2c3: i2c@48060000 { +> i2c3: i2c at 48060000 { > compatible = "ti,omap4-i2c"; > reg = <0x48060000 0x100>; > - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; @@ -389,7 +389,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "i2c3"; > @@ -532,7 +540,7 @@ -> i2c4: i2c@4807a000 { +> i2c4: i2c at 4807a000 { > compatible = "ti,omap4-i2c"; > reg = <0x4807a000 0x100>; > - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; @@ -398,7 +398,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "i2c4"; > @@ -542,7 +550,7 @@ -> i2c5: i2c@4807c000 { +> i2c5: i2c at 4807c000 { > compatible = "ti,omap4-i2c"; > reg = <0x4807c000 0x100>; > - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; @@ -407,7 +407,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "i2c5"; > @@ -552,7 +560,7 @@ -> mmc1: mmc@4809c000 { +> mmc1: mmc at 4809c000 { > compatible = "ti,omap4-hsmmc"; > reg = <0x4809c000 0x400>; > - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; @@ -416,7 +416,7 @@ Tony > ti,dual-volt; > ti,needs-special-reset; > @@ -565,7 +573,7 @@ -> mmc2: mmc@480b4000 { +> mmc2: mmc at 480b4000 { > compatible = "ti,omap4-hsmmc"; > reg = <0x480b4000 0x400>; > - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; @@ -425,7 +425,7 @@ Tony > ti,needs-special-reset; > dmas = <&sdma 47>, <&sdma 48>; > @@ -576,7 +584,7 @@ -> mmc3: mmc@480ad000 { +> mmc3: mmc at 480ad000 { > compatible = "ti,omap4-hsmmc"; > reg = <0x480ad000 0x400>; > - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; @@ -434,7 +434,7 @@ Tony > ti,needs-special-reset; > dmas = <&sdma 77>, <&sdma 78>; > @@ -587,7 +595,7 @@ -> mmc4: mmc@480d1000 { +> mmc4: mmc at 480d1000 { > compatible = "ti,omap4-hsmmc"; > reg = <0x480d1000 0x400>; > - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; @@ -443,7 +443,7 @@ Tony > ti,needs-special-reset; > dmas = <&sdma 57>, <&sdma 58>; > @@ -730,7 +738,7 @@ -> mcspi1: spi@48098000 { +> mcspi1: spi at 48098000 { > compatible = "ti,omap4-mcspi"; > reg = <0x48098000 0x200>; > - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; @@ -452,7 +452,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "mcspi1"; > @@ -751,7 +759,7 @@ -> mcspi2: spi@4809a000 { +> mcspi2: spi at 4809a000 { > compatible = "ti,omap4-mcspi"; > reg = <0x4809a000 0x200>; > - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; @@ -461,7 +461,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "mcspi2"; > @@ -767,7 +775,7 @@ -> mcspi3: spi@480b8000 { +> mcspi3: spi at 480b8000 { > compatible = "ti,omap4-mcspi"; > reg = <0x480b8000 0x200>; > - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; @@ -470,7 +470,7 @@ Tony > #size-cells = <0>; > ti,hwmods = "mcspi3"; > @@ -780,7 +788,7 @@ -> mcspi4: spi@480ba000 { +> mcspi4: spi at 480ba000 { > compatible = "ti,omap4-mcspi"; > reg = <0x480ba000 0x200>; > - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -480,8 +480,4 @@ Tony > ti,hwmods = "mcspi4"; > -- > 1.7.9.5 -> --- -To unsubscribe from this list: send the line "unsubscribe devicetree" in -the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org -More majordomo info at http://vger.kernel.org/majordomo-info.html +> diff --git a/a/content_digest b/N1/content_digest index 09306b3..4f27e3d 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,30 +1,12 @@ "ref\01399384579-25620-1-git-send-email-r.sricharan@ti.com\0" "ref\01399384579-25620-3-git-send-email-r.sricharan@ti.com\0" - "ref\01399384579-25620-3-git-send-email-r.sricharan-l0cyMroinI0@public.gmane.org\0" - "From\0Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>\0" - "Subject\0Re: [PATCH V5 2/3] arm: dts: dra7: Replace peripheral interrupt numbers with crossbar inputs\0" + "From\0tony@atomide.com (Tony Lindgren)\0" + "Subject\0[PATCH V5 2/3] arm: dts: dra7: Replace peripheral interrupt numbers with crossbar inputs\0" "Date\0Tue, 6 May 2014 07:41:29 -0700\0" - "To\0Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org>\0" - "Cc\0linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org - linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org - rnayak-l0cyMroinI0@public.gmane.org - marc.zyngier-5wv7dgnIgG8@public.gmane.org - grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org - mark.rutland-5wv7dgnIgG8@public.gmane.org - tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org - galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org - santosh.shilimkar-l0cyMroinI0@public.gmane.org - nm-l0cyMroinI0@public.gmane.org - bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org - " robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" - "* Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org> [140506 06:58]:\n" + "* Sricharan R <r.sricharan@ti.com> [140506 06:58]:\n" "> Now with the crossbar IP in picture, the peripherals do not have the\n" "> fixed interrupt lines. Instead they rely on the crossbar irqchip to\n" "> allocate and map a free interrupt line to its crossbar input. So replacing\n" @@ -43,12 +25,12 @@ "\n" "Tony\n" " \n" - "> Cc: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>\n" - "> Cc: Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org>\n" - "> Cc: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>\n" - "> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>\n" - "> Signed-off-by: Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org>\n" - "> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>\n" + "> Cc: Benoit Cousson <bcousson@baylibre.com>\n" + "> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>\n" + "> Cc: Rajendra Nayak <rnayak@ti.com>\n" + "> Cc: Tony Lindgren <tony@atomide.com>\n" + "> Signed-off-by: Sricharan R <r.sricharan@ti.com>\n" + "> Signed-off-by: Nishanth Menon <nm@ti.com>\n" "> ---\n" "> [V5] Rebased on 3.15-rc4 and replaced irqs numbers with crossbar\n" "> numbers for new peripherals.\n" @@ -69,10 +51,10 @@ "> +\t\tinterrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,\n" "> +\t\t\t <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;\n" "> \n" - "> \t\tprm: prm@4ae06000 {\n" + "> \t\tprm: prm at 4ae06000 {\n" "> \t\t\tcompatible = \"ti,dra7-prm\";\n" "> @@ -182,10 +182,10 @@\n" - "> \t\tsdma: dma-controller@4a056000 {\n" + "> \t\tsdma: dma-controller at 4a056000 {\n" "> \t\t\tcompatible = \"ti,omap4430-sdma\";\n" "> \t\t\treg = <0x4a056000 0x1000>;\n" "> -\t\t\tinterrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,\n" @@ -87,7 +69,7 @@ "> \t\t\t#dma-channels = <32>;\n" "> \t\t\t#dma-requests = <127>;\n" "> @@ -194,7 +194,7 @@\n" - "> \t\tgpio1: gpio@4ae10000 {\n" + "> \t\tgpio1: gpio at 4ae10000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x4ae10000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -96,7 +78,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -205,7 +205,7 @@\n" - "> \t\tgpio2: gpio@48055000 {\n" + "> \t\tgpio2: gpio at 48055000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x48055000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -105,7 +87,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -216,7 +216,7 @@\n" - "> \t\tgpio3: gpio@48057000 {\n" + "> \t\tgpio3: gpio at 48057000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x48057000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -114,7 +96,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -227,7 +227,7 @@\n" - "> \t\tgpio4: gpio@48059000 {\n" + "> \t\tgpio4: gpio at 48059000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x48059000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -123,7 +105,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -238,7 +238,7 @@\n" - "> \t\tgpio5: gpio@4805b000 {\n" + "> \t\tgpio5: gpio at 4805b000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x4805b000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -132,7 +114,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -249,7 +249,7 @@\n" - "> \t\tgpio6: gpio@4805d000 {\n" + "> \t\tgpio6: gpio at 4805d000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x4805d000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -141,7 +123,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -260,7 +260,7 @@\n" - "> \t\tgpio7: gpio@48051000 {\n" + "> \t\tgpio7: gpio at 48051000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x48051000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -150,7 +132,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -271,7 +271,7 @@\n" - "> \t\tgpio8: gpio@48053000 {\n" + "> \t\tgpio8: gpio at 48053000 {\n" "> \t\t\tcompatible = \"ti,omap4-gpio\";\n" "> \t\t\treg = <0x48053000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -159,7 +141,7 @@ "> \t\t\tgpio-controller;\n" "> \t\t\t#gpio-cells = <2>;\n" "> @@ -282,7 +282,7 @@\n" - "> \t\tuart1: serial@4806a000 {\n" + "> \t\tuart1: serial at 4806a000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x4806a000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -168,7 +150,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -291,7 +291,7 @@\n" - "> \t\tuart2: serial@4806c000 {\n" + "> \t\tuart2: serial at 4806c000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x4806c000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -177,7 +159,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -300,7 +300,7 @@\n" - "> \t\tuart3: serial@48020000 {\n" + "> \t\tuart3: serial at 48020000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x48020000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -186,7 +168,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -309,7 +309,7 @@\n" - "> \t\tuart4: serial@4806e000 {\n" + "> \t\tuart4: serial at 4806e000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x4806e000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -195,7 +177,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> status = \"disabled\";\n" "> @@ -318,7 +318,7 @@\n" - "> \t\tuart5: serial@48066000 {\n" + "> \t\tuart5: serial at 48066000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x48066000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -204,7 +186,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -327,7 +327,7 @@\n" - "> \t\tuart6: serial@48068000 {\n" + "> \t\tuart6: serial at 48068000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x48068000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -213,7 +195,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -336,6 +336,7 @@\n" - "> \t\tuart7: serial@48420000 {\n" + "> \t\tuart7: serial at 48420000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x48420000 0x100>;\n" "> +\t\t\tinterrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -221,7 +203,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -344,6 +345,7 @@\n" - "> \t\tuart8: serial@48422000 {\n" + "> \t\tuart8: serial at 48422000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x48422000 0x100>;\n" "> +\t\t\tinterrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -229,7 +211,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -352,6 +354,7 @@\n" - "> \t\tuart9: serial@48424000 {\n" + "> \t\tuart9: serial at 48424000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x48424000 0x100>;\n" "> +\t\t\tinterrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -237,7 +219,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -360,6 +363,7 @@\n" - "> \t\tuart10: serial@4ae2b000 {\n" + "> \t\tuart10: serial at 4ae2b000 {\n" "> \t\t\tcompatible = \"ti,omap4-uart\";\n" "> \t\t\treg = <0x4ae2b000 0x100>;\n" "> +\t\t\tinterrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -245,7 +227,7 @@ "> \t\t\tclock-frequency = <48000000>;\n" "> \t\t\tstatus = \"disabled\";\n" "> @@ -368,7 +372,7 @@\n" - "> \t\ttimer1: timer@4ae18000 {\n" + "> \t\ttimer1: timer at 4ae18000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x4ae18000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -254,7 +236,7 @@ "> \t\t\tti,timer-alwon;\n" "> \t\t};\n" "> @@ -376,28 +380,28 @@\n" - "> \t\ttimer2: timer@48032000 {\n" + "> \t\ttimer2: timer at 48032000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48032000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -262,7 +244,7 @@ "> \t\t\tti,hwmods = \"timer2\";\n" "> \t\t};\n" "> \n" - "> \t\ttimer3: timer@48034000 {\n" + "> \t\ttimer3: timer at 48034000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48034000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -270,7 +252,7 @@ "> \t\t\tti,hwmods = \"timer3\";\n" "> \t\t};\n" "> \n" - "> \t\ttimer4: timer@48036000 {\n" + "> \t\ttimer4: timer at 48036000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48036000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -278,7 +260,7 @@ "> \t\t\tti,hwmods = \"timer4\";\n" "> \t\t};\n" "> \n" - "> \t\ttimer5: timer@48820000 {\n" + "> \t\ttimer5: timer at 48820000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48820000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -287,7 +269,7 @@ "> \t\t\tti,timer-dsp;\n" "> \t\t};\n" "> @@ -405,7 +409,7 @@\n" - "> \t\ttimer6: timer@48822000 {\n" + "> \t\ttimer6: timer at 48822000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48822000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -296,7 +278,7 @@ "> \t\t\tti,timer-dsp;\n" "> \t\t\tti,timer-pwm;\n" "> @@ -414,7 +418,7 @@\n" - "> \t\ttimer7: timer@48824000 {\n" + "> \t\ttimer7: timer at 48824000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48824000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -305,7 +287,7 @@ "> \t\t\tti,timer-dsp;\n" "> \t\t};\n" "> @@ -422,7 +426,7 @@\n" - "> \t\ttimer8: timer@48826000 {\n" + "> \t\ttimer8: timer at 48826000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48826000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -314,7 +296,7 @@ "> \t\t\tti,timer-dsp;\n" "> \t\t\tti,timer-pwm;\n" "> @@ -431,21 +435,21 @@\n" - "> \t\ttimer9: timer@4803e000 {\n" + "> \t\ttimer9: timer at 4803e000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x4803e000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -322,7 +304,7 @@ "> \t\t\tti,hwmods = \"timer9\";\n" "> \t\t};\n" "> \n" - "> \t\ttimer10: timer@48086000 {\n" + "> \t\ttimer10: timer at 48086000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48086000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -330,7 +312,7 @@ "> \t\t\tti,hwmods = \"timer10\";\n" "> \t\t};\n" "> \n" - "> \t\ttimer11: timer@48088000 {\n" + "> \t\ttimer11: timer at 48088000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48088000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -339,7 +321,7 @@ "> \t\t\tti,timer-pwm;\n" "> \t\t};\n" "> @@ -453,6 +457,7 @@\n" - "> \t\ttimer13: timer@48828000 {\n" + "> \t\ttimer13: timer at 48828000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x48828000 0x80>;\n" "> +\t\t\tinterrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -347,7 +329,7 @@ "> \t\t\tstatus = \"disabled\";\n" "> \t\t};\n" "> @@ -460,6 +465,7 @@\n" - "> \t\ttimer14: timer@4882a000 {\n" + "> \t\ttimer14: timer at 4882a000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x4882a000 0x80>;\n" "> +\t\t\tinterrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -355,7 +337,7 @@ "> \t\t\tstatus = \"disabled\";\n" "> \t\t};\n" "> @@ -467,6 +473,7 @@\n" - "> \t\ttimer15: timer@4882c000 {\n" + "> \t\ttimer15: timer at 4882c000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x4882c000 0x80>;\n" "> +\t\t\tinterrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -363,7 +345,7 @@ "> \t\t\tstatus = \"disabled\";\n" "> \t\t};\n" "> @@ -474,6 +481,7 @@\n" - "> \t\ttimer16: timer@4882e000 {\n" + "> \t\ttimer16: timer at 4882e000 {\n" "> \t\t\tcompatible = \"ti,omap5430-timer\";\n" "> \t\t\treg = <0x4882e000 0x80>;\n" "> +\t\t\tinterrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -371,7 +353,7 @@ "> \t\t\tstatus = \"disabled\";\n" "> \t\t};\n" "> @@ -481,7 +489,7 @@\n" - "> \t\twdt2: wdt@4ae14000 {\n" + "> \t\twdt2: wdt at 4ae14000 {\n" "> \t\t\tcompatible = \"ti,omap4-wdt\";\n" "> \t\t\treg = <0x4ae14000 0x80>;\n" "> -\t\t\tinterrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -380,7 +362,7 @@ "> \t\t};\n" "> \n" "> @@ -495,14 +503,14 @@\n" - "> \t\tdmm@4e000000 {\n" + "> \t\tdmm at 4e000000 {\n" "> \t\t\tcompatible = \"ti,omap5-dmm\";\n" "> \t\t\treg = <0x4e000000 0x800>;\n" "> -\t\t\tinterrupts = <0 113 0x4>;\n" @@ -388,7 +370,7 @@ "> \t\t\tti,hwmods = \"dmm\";\n" "> \t\t};\n" "> \n" - "> \t\ti2c1: i2c@48070000 {\n" + "> \t\ti2c1: i2c at 48070000 {\n" "> \t\t\tcompatible = \"ti,omap4-i2c\";\n" "> \t\t\treg = <0x48070000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -397,7 +379,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"i2c1\";\n" "> @@ -512,7 +520,7 @@\n" - "> \t\ti2c2: i2c@48072000 {\n" + "> \t\ti2c2: i2c at 48072000 {\n" "> \t\t\tcompatible = \"ti,omap4-i2c\";\n" "> \t\t\treg = <0x48072000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -406,7 +388,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"i2c2\";\n" "> @@ -522,7 +530,7 @@\n" - "> \t\ti2c3: i2c@48060000 {\n" + "> \t\ti2c3: i2c at 48060000 {\n" "> \t\t\tcompatible = \"ti,omap4-i2c\";\n" "> \t\t\treg = <0x48060000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -415,7 +397,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"i2c3\";\n" "> @@ -532,7 +540,7 @@\n" - "> \t\ti2c4: i2c@4807a000 {\n" + "> \t\ti2c4: i2c at 4807a000 {\n" "> \t\t\tcompatible = \"ti,omap4-i2c\";\n" "> \t\t\treg = <0x4807a000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -424,7 +406,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"i2c4\";\n" "> @@ -542,7 +550,7 @@\n" - "> \t\ti2c5: i2c@4807c000 {\n" + "> \t\ti2c5: i2c at 4807c000 {\n" "> \t\t\tcompatible = \"ti,omap4-i2c\";\n" "> \t\t\treg = <0x4807c000 0x100>;\n" "> -\t\t\tinterrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -433,7 +415,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"i2c5\";\n" "> @@ -552,7 +560,7 @@\n" - "> \t\tmmc1: mmc@4809c000 {\n" + "> \t\tmmc1: mmc at 4809c000 {\n" "> \t\t\tcompatible = \"ti,omap4-hsmmc\";\n" "> \t\t\treg = <0x4809c000 0x400>;\n" "> -\t\t\tinterrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -442,7 +424,7 @@ "> \t\t\tti,dual-volt;\n" "> \t\t\tti,needs-special-reset;\n" "> @@ -565,7 +573,7 @@\n" - "> \t\tmmc2: mmc@480b4000 {\n" + "> \t\tmmc2: mmc at 480b4000 {\n" "> \t\t\tcompatible = \"ti,omap4-hsmmc\";\n" "> \t\t\treg = <0x480b4000 0x400>;\n" "> -\t\t\tinterrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -451,7 +433,7 @@ "> \t\t\tti,needs-special-reset;\n" "> \t\t\tdmas = <&sdma 47>, <&sdma 48>;\n" "> @@ -576,7 +584,7 @@\n" - "> \t\tmmc3: mmc@480ad000 {\n" + "> \t\tmmc3: mmc at 480ad000 {\n" "> \t\t\tcompatible = \"ti,omap4-hsmmc\";\n" "> \t\t\treg = <0x480ad000 0x400>;\n" "> -\t\t\tinterrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -460,7 +442,7 @@ "> \t\t\tti,needs-special-reset;\n" "> \t\t\tdmas = <&sdma 77>, <&sdma 78>;\n" "> @@ -587,7 +595,7 @@\n" - "> \t\tmmc4: mmc@480d1000 {\n" + "> \t\tmmc4: mmc at 480d1000 {\n" "> \t\t\tcompatible = \"ti,omap4-hsmmc\";\n" "> \t\t\treg = <0x480d1000 0x400>;\n" "> -\t\t\tinterrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -469,7 +451,7 @@ "> \t\t\tti,needs-special-reset;\n" "> \t\t\tdmas = <&sdma 57>, <&sdma 58>;\n" "> @@ -730,7 +738,7 @@\n" - "> \t\tmcspi1: spi@48098000 {\n" + "> \t\tmcspi1: spi at 48098000 {\n" "> \t\t\tcompatible = \"ti,omap4-mcspi\";\n" "> \t\t\treg = <0x48098000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -478,7 +460,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"mcspi1\";\n" "> @@ -751,7 +759,7 @@\n" - "> \t\tmcspi2: spi@4809a000 {\n" + "> \t\tmcspi2: spi at 4809a000 {\n" "> \t\t\tcompatible = \"ti,omap4-mcspi\";\n" "> \t\t\treg = <0x4809a000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -487,7 +469,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"mcspi2\";\n" "> @@ -767,7 +775,7 @@\n" - "> \t\tmcspi3: spi@480b8000 {\n" + "> \t\tmcspi3: spi at 480b8000 {\n" "> \t\t\tcompatible = \"ti,omap4-mcspi\";\n" "> \t\t\treg = <0x480b8000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -496,7 +478,7 @@ "> \t\t\t#size-cells = <0>;\n" "> \t\t\tti,hwmods = \"mcspi3\";\n" "> @@ -780,7 +788,7 @@\n" - "> \t\tmcspi4: spi@480ba000 {\n" + "> \t\tmcspi4: spi at 480ba000 {\n" "> \t\t\tcompatible = \"ti,omap4-mcspi\";\n" "> \t\t\treg = <0x480ba000 0x200>;\n" "> -\t\t\tinterrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -506,10 +488,6 @@ "> \t\t\tti,hwmods = \"mcspi4\";\n" "> -- \n" "> 1.7.9.5\n" - "> \n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" - "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + > -4bc7fab60699528ed963594bcfeee80a908ae72b7c037a2f657142577a20e50c +a029c38a40d78e03ab210534e3c9e9861d85569ff1eaee46b96e2b9ef6158d75
diff --git a/a/1.txt b/N2/1.txt index 346f40a..2dac51a 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,4 +1,4 @@ -* Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org> [140506 06:58]: +* Sricharan R <r.sricharan@ti.com> [140506 06:58]: > Now with the crossbar IP in picture, the peripherals do not have the > fixed interrupt lines. Instead they rely on the crossbar irqchip to > allocate and map a free interrupt line to its crossbar input. So replacing @@ -17,12 +17,12 @@ Regards, Tony -> Cc: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> -> Cc: Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org> -> Cc: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org> -> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> -> Signed-off-by: Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org> -> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> +> Cc: Benoit Cousson <bcousson@baylibre.com> +> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> +> Cc: Rajendra Nayak <rnayak@ti.com> +> Cc: Tony Lindgren <tony@atomide.com> +> Signed-off-by: Sricharan R <r.sricharan@ti.com> +> Signed-off-by: Nishanth Menon <nm@ti.com> > --- > [V5] Rebased on 3.15-rc4 and replaced irqs numbers with crossbar > numbers for new peripherals. @@ -480,8 +480,4 @@ Tony > ti,hwmods = "mcspi4"; > -- > 1.7.9.5 -> --- -To unsubscribe from this list: send the line "unsubscribe devicetree" in -the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org -More majordomo info at http://vger.kernel.org/majordomo-info.html +> diff --git a/a/content_digest b/N2/content_digest index 09306b3..0b6d964 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,30 +1,29 @@ "ref\01399384579-25620-1-git-send-email-r.sricharan@ti.com\0" "ref\01399384579-25620-3-git-send-email-r.sricharan@ti.com\0" - "ref\01399384579-25620-3-git-send-email-r.sricharan-l0cyMroinI0@public.gmane.org\0" - "From\0Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>\0" + "From\0Tony Lindgren <tony@atomide.com>\0" "Subject\0Re: [PATCH V5 2/3] arm: dts: dra7: Replace peripheral interrupt numbers with crossbar inputs\0" "Date\0Tue, 6 May 2014 07:41:29 -0700\0" - "To\0Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org>\0" - "Cc\0linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org - linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org - rnayak-l0cyMroinI0@public.gmane.org - marc.zyngier-5wv7dgnIgG8@public.gmane.org - grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org - mark.rutland-5wv7dgnIgG8@public.gmane.org - tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org - galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org - santosh.shilimkar-l0cyMroinI0@public.gmane.org - nm-l0cyMroinI0@public.gmane.org - bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org - " robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "To\0Sricharan R <r.sricharan@ti.com>\0" + "Cc\0linux-kernel@vger.kernel.org" + devicetree@vger.kernel.org + linux-doc@vger.kernel.org + linux-arm-kernel@lists.infradead.org + linux-omap@vger.kernel.org + linus.walleij@linaro.org + linux@arm.linux.org.uk + rnayak@ti.com + marc.zyngier@arm.com + grant.likely@linaro.org + mark.rutland@arm.com + tglx@linutronix.de + galak@codeaurora.org + santosh.shilimkar@ti.com + nm@ti.com + bcousson@baylibre.com + " robherring2@gmail.com\0" "\00:1\0" "b\0" - "* Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org> [140506 06:58]:\n" + "* Sricharan R <r.sricharan@ti.com> [140506 06:58]:\n" "> Now with the crossbar IP in picture, the peripherals do not have the\n" "> fixed interrupt lines. Instead they rely on the crossbar irqchip to\n" "> allocate and map a free interrupt line to its crossbar input. So replacing\n" @@ -43,12 +42,12 @@ "\n" "Tony\n" " \n" - "> Cc: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>\n" - "> Cc: Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org>\n" - "> Cc: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>\n" - "> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>\n" - "> Signed-off-by: Sricharan R <r.sricharan-l0cyMroinI0@public.gmane.org>\n" - "> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>\n" + "> Cc: Benoit Cousson <bcousson@baylibre.com>\n" + "> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>\n" + "> Cc: Rajendra Nayak <rnayak@ti.com>\n" + "> Cc: Tony Lindgren <tony@atomide.com>\n" + "> Signed-off-by: Sricharan R <r.sricharan@ti.com>\n" + "> Signed-off-by: Nishanth Menon <nm@ti.com>\n" "> ---\n" "> [V5] Rebased on 3.15-rc4 and replaced irqs numbers with crossbar\n" "> numbers for new peripherals.\n" @@ -506,10 +505,6 @@ "> \t\t\tti,hwmods = \"mcspi4\";\n" "> -- \n" "> 1.7.9.5\n" - "> \n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" - "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + > -4bc7fab60699528ed963594bcfeee80a908ae72b7c037a2f657142577a20e50c +13441b9aab1951f83e751ea9cb3afd3c90974afaaaa322fc6b99310c826c9c75
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.