All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Mair-Keimberger <m.mairkeimberger@gmail.com>
To: andrew.cooper3@citrix.com
Cc: xen-devel@lists.xen.org
Subject: Re: [BUG] (hvm)-virtualization doesn't work with xen 4.4
Date: Fri, 9 May 2014 20:30:43 +0200	[thread overview]
Message-ID: <20140509183043.GA3261@asterix> (raw)


[-- Attachment #1.1.1: Type: text/plain, Size: 8224 bytes --]

Hi Andrew,
Hi List,

Sorry, for this late reply!
I didn't subscribe to the xen-devel mailing list and because of that i
didn't got any reply. On [1] it's written the lists policy is to CC
people so i though it's ok not to subscribe. It would be great if you
could CC me next time.

[1] http://wiki.xen.org/wiki/Reporting_Bugs_against_Xen

Because of that i've just copied your answer into a new mail and send it
directly to you + CC the list. Don't know if that is a proper way and i
hope i don't mess up to much...

About my bug:


>> Hi List,
>>
>> This is a forwarded mail which i already sent to the xen-users mailing
>> list, however it was suggested to open a BUG about my problem which
>> seems to work via the xen-devel mailing list. :)
>>
>> Below is my description about my problem - at the end i've added some
>> more information about my xen configuration. If you need some other
>> information, please let me know :)
>
>Can you please post the complete xl dmesg from boot including one
>attempted boot of the VM.  What you have pasted here is simply not
>enough for us to help you with.  If you could boot xen with "loglvl=all
>guest_loglvl=all" on the command line, that would help things.

Hmm, i though i did include a complete xl dmesg in my last mail (though it
was a bit far back at mail), however, below is another xl dmesg. I've
also included my complete dmesg in case you need that too.
xl dmesg was done after i tried to start the vm via "xl create
/path/to/config"

> Xen 4.4.0
>(XEN) Xen version 4.4.0 (@xonet.at) (x86_64-pc-linux-gnu-gcc (Gentoo 4.8.2 p1.3r1, pie-0.5.8r1) 4.8.2) debug=n Sat Apr 12 09:46:34 CEST 2014
>(XEN) Latest ChangeSet: 
>(XEN) Bootloader: GRUB 2.02~beta1
>(XEN) Command line: dom0_mem=8192M,max:8192M iommu=debug,verbose xsave=1 dom0_max_vcpus=4 dom0_vcpus_pin ivrs_ioapic[8]=00:14.0
>(XEN) Video information:
>(XEN)  VGA is text mode 80x25, font 8x16
>(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
>(XEN) Disc information:
>(XEN)  Found 3 MBR signatures
>(XEN)  Found 3 EDD information structures
>(XEN) Xen-e820 RAM map:
>(XEN)  0000000000000000 - 000000000009f800 (usable)
>(XEN)  000000000009f800 - 00000000000a0000 (reserved)
>(XEN)  00000000000f0000 - 0000000000100000 (reserved)
>(XEN)  0000000000100000 - 00000000bfda0000 (usable)
>(XEN)  00000000bfda0000 - 00000000bfdd1000 (ACPI NVS)
>(XEN)  00000000bfdd1000 - 00000000bfe00000 (ACPI data)
>(XEN)  00000000bfe00000 - 00000000bff00000 (reserved)
>(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
>(XEN)  00000000fec00000 - 0000000100000000 (reserved)
>(XEN)  0000000100000000 - 000000043f000000 (usable)
>(XEN) ACPI: RSDP 000F6BF0, 0014 (r0 GBT   )
>(XEN) ACPI: RSDT BFDD1000, 0050 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>(XEN) ACPI: FACP BFDD1080, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>(XEN) ACPI: DSDT BFDD1100, 7997 (r1 GBT    GBTUACPI     1000 MSFT  3000000)
>(XEN) ACPI: FACS BFDA0000, 0040
>(XEN) ACPI: MSDM BFDD8B80, 0055 (r3 GBT    GBTUACPI 42302E31 GBTU  1010101)
>(XEN) ACPI: HPET BFDD8C00, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>(XEN) ACPI: MCFG BFDD8C40, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>(XEN) ACPI: EUDS BFDD8CC0, 0740 (r1 GBT                    0             0)
>(XEN) ACPI: MATS BFDD9400, 0034 (r1 GBT                    0             0)
>(XEN) ACPI: TAMG BFDD9470, 0182 (r1 GBT    GBT   B0 5455312E BG\x01\x01 53450101)
>(XEN) ACPI: APIC BFDD8AC0, 00BC (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>(XEN) ACPI: MATS BFDD9600, 66BB (r1        MATS RCM 80000001 INTL 20061109)
>(XEN) ACPI: SSDT BFDDFD30, 1714 (r1 AMD    POWERNOW        1 AMD         1)
>(XEN) ACPI: IVRS BFDE14C0, 0100 (r1  AMD     RD890S   202031 AMD         0)
>(XEN) System RAM: 16365MB (16758012kB)
>(XEN) Domain heap initialised
>(XEN) Processor #0 5:2 APIC version 16
>(XEN) Processor #1 5:2 APIC version 16
>(XEN) Processor #2 5:2 APIC version 16
>(XEN) Processor #3 5:2 APIC version 16
>(XEN) Processor #4 5:2 APIC version 16
>(XEN) Processor #5 5:2 APIC version 16
>(XEN) Processor #6 5:2 APIC version 16
>(XEN) Processor #7 5:2 APIC version 16
>(XEN) IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
>(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
>(XEN) Using scheduler: SMP Credit Scheduler (credit)
>(XEN) Detected 4026.919 MHz processor.
>(XEN) Initing memory sharing.
>(XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007
>(XEN) AMD-Vi: IOMMU 0 Enabled.
>(XEN) I/O virtualisation enabled
>(XEN)  - Dom0 mode: Relaxed
>(XEN) Interrupt remapping enabled
>(XEN) ENABLING IO-APIC IRQs
>(XEN)  -> Using new ACK method
>(XEN) Platform timer is 14.318MHz HPET
>(XEN) Allocated console ring of 16 KiB.
>(XEN) HVM: ASIDs enabled.
>(XEN) SVM: Supported advanced features:
>(XEN)  - Nested Page Tables (NPT)
>(XEN)  - Last Branch Record (LBR) Virtualisation
>(XEN)  - Next-RIP Saved on #VMEXIT
>(XEN)  - VMCB Clean Bits
>(XEN)  - DecodeAssists
>(XEN)  - Pause-Intercept Filter
>(XEN)  - TSC Rate MSR
>(XEN) HVM: SVM enabled
>(XEN) HVM: Hardware Assisted Paging (HAP) detected
>(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
>(XEN) spurious 8259A interrupt: IRQ7.
>(XEN) CPU1: No irq handler for vector e7 (IRQ -2147483648)
>(XEN) CPU2: No irq handler for vector e7 (IRQ -2147483648)
>(XEN) CPU3: No irq handler for vector e7 (IRQ -2147483648)
>(XEN) CPU4: No irq handler for vector e7 (IRQ -2147483648)
>(XEN) CPU5: No irq handler for vector e7 (IRQ -2147483648)
>(XEN) CPU6: No irq handler for vector e7 (IRQ -2147483648)
>(XEN) Brought up 8 CPUs
>(XEN) CPU7: No irq handler for vector e7 (IRQ -2147483648)
>(XEN) *** LOADING DOMAIN 0 ***
>(XEN)  Xen  kernel: 64-bit, lsb, compat32
>(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1bd5000
>(XEN) PHYSICAL MEMORY ARRANGEMENT:
>(XEN)  Dom0 alloc.:   000000042c000000->0000000430000000 (2080768 pages to be allocated)
>(XEN) VIRTUAL MEMORY ARRANGEMENT:
>(XEN)  Loaded kernel: ffffffff81000000->ffffffff81bd5000
>(XEN)  Init. ramdisk: ffffffff81bd5000->ffffffff81bd5000
>(XEN)  Phys-Mach map: ffffffff81bd5000->ffffffff82bd5000
>(XEN)  Start info:    ffffffff82bd5000->ffffffff82bd54b4
>(XEN)  Page tables:   ffffffff82bd6000->ffffffff82bf1000
>(XEN)  Boot stack:    ffffffff82bf1000->ffffffff82bf2000
>(XEN)  TOTAL:         ffffffff80000000->ffffffff83000000
>(XEN)  ENTRY ADDRESS: ffffffff816701f0
>(XEN) Dom0 has maximum 4 VCPUs
>(XEN) Scrubbing Free RAM: ................................................................................done.
>(XEN) Initial low memory virq threshold set at 0x4000 pages.
>(XEN) Std. Loglevel: Errors and warnings
>(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>(XEN) Xen is relinquishing VGA console.
>(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
>(XEN) Freed 280kB init memory.
>(XEN) traps.c:2514:d0 Domain attempted WRMSR 00000000c0010201 from 0x0000000000000000 to 0x000000000000ffff.
>(XEN) mm.c:809: d0: Forcing read-only access to MFN e0002
>(XEN) io.c:204:d2 MMIO emulation failed @ 0008:ffff1f50: 32 00 00 00 00 00 00 00 36 99

Hope this helps :)

> I've recently updated my xen setup from 4.1 to 4.4. Now it's impossible
> for me to start any (basic) vm.
> My basic config looks like this atm:
>
>> on_poweroff='destroy'
>> on_reboot='destroy'
>> on_crash='destroy'
>>
>>
disk=['file:/home/michael/xen/win7x64s.img,hda,w','file:/home/michael/xen/dvd/win7x64.iso,hdc:cdrom,r']
>> vif=['mac=DE:AD:CA:5E:13:37,bridge=br0,type=ioemu']
>>
>> boot='d'
>>
>> name = 'HVM_domU'
>> builder = 'hvm'
>> memory = 256
>> vcpus = 2
>> vnc = 1
>> vnclisten = '0.0.0.0'
>> vncdisplay = 1
>
> <snip>
>
> xl dmesg only shows one returning error, which didn't help me at all as i
> couldn't find any usefull help about this message:
>
>> (XEN) io.c:204:d2 MMIO emulation failed @ 0008:ffff1f50: 4a 00 00 00
00 00 00 00 36 99

This is quite strange.  That is a malformed 64bit instruction, and 32 or
16bit would be dec %[e]dx, which should not be hitting the emulator
under any circumstance I am aware of.

~Andrew

[-- Attachment #1.1.2: dmesg.txt --]
[-- Type: text/plain, Size: 70678 bytes --]

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.2-gentoo (root@asterix) (gcc version 4.8.2 (Gentoo 4.8.2 p1.3r1, pie-0.5.8r1) ) #2 SMP PREEMPT Fri May 9 19:47:19 CEST 2014
[    0.000000] Command line: root=/dev/md3 radeon.pcie_gen2=1 radeon.dpm=1 softlevel=xen xen-pciback.permissive xen-pciback.hide=(01:00.0)(01:00.1)(00:12.0)(00:12.2)
[    0.000000] Freeing 9f-100 pfn range: 97 pages freed
[    0.000000] 1-1 mapping on 9f->100
[    0.000000] Freeing bfda0-100000 pfn range: 262752 pages freed
[    0.000000] 1-1 mapping on bfda0->100000
[    0.000000] Released 262849 pages of unused memory
[    0.000000] Set 262849 page(s) to 1-1 mapping
[    0.000000] Populating 200000-2402c1 pfn range: 262849 pages added
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] Xen: [mem 0x000000000009f800-0x00000000000fffff] reserved
[    0.000000] Xen: [mem 0x0000000000100000-0x00000000bfd9ffff] usable
[    0.000000] Xen: [mem 0x00000000bfda0000-0x00000000bfdd0fff] ACPI NVS
[    0.000000] Xen: [mem 0x00000000bfdd1000-0x00000000bfdfffff] ACPI data
[    0.000000] Xen: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
[    0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] Xen: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] Xen: [mem 0x0000000100000000-0x00000002402c0fff] usable
[    0.000000] Xen: [mem 0x00000002402c1000-0x000000043effffff] unusable
[    0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD5/GA-990FXA-UD5, BIOS F12a 01/24/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x2402c1 max_arch_pfn = 0x400000000
[    0.000000] e820: last_pfn = 0xbfda0 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x240000000-0x2401fffff]
[    0.000000]  [mem 0x240000000-0x2401fffff] page 4k
[    0.000000] BRK [0x017d3000, 0x017d3fff] PGTABLE
[    0.000000] BRK [0x017d4000, 0x017d4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23fffffff]
[    0.000000]  [mem 0x23c000000-0x23fffffff] page 4k
[    0.000000] BRK [0x017d5000, 0x017d5fff] PGTABLE
[    0.000000] BRK [0x017d6000, 0x017d6fff] PGTABLE
[    0.000000] BRK [0x017d7000, 0x017d7fff] PGTABLE
[    0.000000] BRK [0x017d8000, 0x017d8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[    0.000000]  [mem 0x200000000-0x23bffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfd9ffff]
[    0.000000]  [mem 0x00100000-0xbfd9ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x240200000-0x2402c0fff]
[    0.000000]  [mem 0x240200000-0x2402c0fff] page 4k
[    0.000000] ACPI: RSDP 00000000000f6bf0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000bfdd1000 000050 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000bfdd1080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000bfdd1100 007997 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000bfda0000 000040
[    0.000000] ACPI: MSDM 00000000bfdd8b80 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 00000000bfdd8c00 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000bfdd8c40 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: EUDS 00000000bfdd8cc0 000740 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: MATS 00000000bfdd9400 000034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000bfdd9470 000182 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000bfdd8ac0 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 00000000bfdd9600 0066BB (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bfddfd30 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: IVRS 00000000bfde14c0 000100 (v01  AMD     RD890S 00202031 AMD  00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] NUMA turned off
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000002402c0fff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x2402c0fff]
[    0.000000]   NODE_DATA [mem 0x2402bd000-0x2402c0fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x2402c0fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbfd9ffff]
[    0.000000]   node   0: [mem 0x100000000-0x2402c0fff]
[    0.000000] On node 0 totalpages: 2097151
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12215 pages used for memmap
[    0.000000]   DMA32 zone: 781728 pages, LIFO batch:31
[    0.000000]   Normal zone: 20492 pages used for memmap
[    0.000000]   Normal zone: 1311425 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfda0000-0xbfdd0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfdd1000-0xbfdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.4.0 (preserve-AD)
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023f000000 s79104 r8192 d23296 u262144
[    0.000000] pcpu-alloc: s79104 r8192 d23296 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2064359
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/md3 radeon.pcie_gen2=1 radeon.dpm=1 softlevel=xen xen-pciback.permissive xen-pciback.hide=(01:00.0)(01:00.1)(00:12.0)(00:12.2)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] software IO TLB [mem 0x231800000-0x235800000] (64MB) mapped at [ffff880231800000-ffff8802357fffff]
[    0.000000] Memory: 8147216K/8388604K available (4104K kernel code, 459K rwdata, 1932K rodata, 856K init, 488K bss, 241388K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] xen:events: Using FIFO-based ABI
[    0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[    0.000000] xen: registering gsi 9 triggering 0 polarity 1
[    0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[    0.000000] xen: acpi sci 9
[    0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[    0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[    0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[    0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[    0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[    0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[    0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[    0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[    0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[    0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[    0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[    0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[    0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[    0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] tsc: Detected 4026.916 MHz processor
[    3.654813] Calibrating delay loop (skipped), value calculated using timer frequency.. 8053.83 BogoMIPS (lpj=4026916)
[    3.654896] pid_max: default: 32768 minimum: 301
[    3.654941] ACPI: Core revision 20131218
[    3.660695] ACPI: All ACPI Tables successfully acquired
[    3.726657] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    4.455744] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    4.456493] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    4.456552] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    4.456789] Initializing cgroup subsys devices
[    4.456830] Initializing cgroup subsys freezer
[    4.456871] Initializing cgroup subsys blkio
[    4.456953] tseg: 00bff00000
[    4.456955] CPU: Physical Processor ID: 0
[    4.456994] CPU: Processor Core ID: 0
[    4.457035] mce: CPU supports 2 MCE banks
[    4.457084] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[    4.457196] Freeing SMP alternatives memory: 20K (ffffffff81732000 - ffffffff81737000)
[    4.457776] Performance Events: Fam15h core perfctr, Broken PMU hardware detected, using software events only.
[    4.457938] Failed to access perfctr msr (MSR c0010201 is 0)
[    4.463915] installing Xen timer for CPU 1
[    4.466078] installing Xen timer for CPU 2
[    4.468229] installing Xen timer for CPU 3
[    4.468400] x86: Booted up 1 node, 4 CPUs
[    4.468613] devtmpfs: initialized
[    4.468856] PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes)
[    4.469079] NET: Registered protocol family 16
[    4.469125] xen:grant_table: Grant tables using version 1 layout
[    4.469172] Grant table initialized
[    4.469667] ACPI: bus type PCI registered
[    4.470115] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    4.470163] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    4.495298] PCI: Using configuration type 1 for base access
[    4.499985] bio: create slab <bio-0> at 0
[    4.500243] ACPI: Added _OSI(Module Device)
[    4.500284] ACPI: Added _OSI(Processor Device)
[    4.500324] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.500364] ACPI: Added _OSI(Processor Aggregator Device)
[    4.506190] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xD2, should be 0xD1 (20131218/tbprint-214)
[    4.506403] ACPI: Interpreter enabled
[    4.506447] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    4.506565] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    4.506689] ACPI: (supports S0 S3 S4 S5)
[    4.506728] ACPI: Using IOAPIC for interrupt routing
[    4.506873] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    4.506978] ACPI: No dock devices found.
[    4.585806] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    4.585851] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    4.585893] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.586044] PCI host bridge to bus 0000:00
[    4.586085] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.586125] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    4.586165] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    4.586206] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    4.586247] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    4.586288] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    4.586328] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    4.586391] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    4.586417] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[    4.586628] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    4.586822] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    4.586908] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    4.586950] pci 0000:00:02.0: System wakeup disabled by ACPI
[    4.587075] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    4.587158] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    4.587198] pci 0000:00:09.0: System wakeup disabled by ACPI
[    4.587314] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    4.587398] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    4.587439] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    4.587557] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[    4.587642] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[    4.587682] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    4.587804] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    4.587829] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    4.587841] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    4.587853] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    4.587864] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    4.587881] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    4.587893] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
[    4.587919] pci 0000:00:11.0: set SATA to AHCI mode
[    4.588106] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    4.588123] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
[    4.588223] pci 0000:00:12.0: System wakeup disabled by ACPI
[    4.588345] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    4.588370] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
[    4.588481] pci 0000:00:12.2: supports D1 D2
[    4.588482] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    4.588518] pci 0000:00:12.2: System wakeup disabled by ACPI
[    4.588637] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    4.588654] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
[    4.588755] pci 0000:00:13.0: System wakeup disabled by ACPI
[    4.588877] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    4.588901] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
[    4.589015] pci 0000:00:13.2: supports D1 D2
[    4.589017] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    4.589053] pci 0000:00:13.2: System wakeup disabled by ACPI
[    4.589174] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    4.589351] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    4.589368] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    4.589380] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    4.589392] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    4.589403] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    4.589415] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    4.589544] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    4.589572] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    4.589659] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    4.589692] pci 0000:00:14.2: System wakeup disabled by ACPI
[    4.589804] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    4.589988] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    4.590059] pci 0000:00:14.4: System wakeup disabled by ACPI
[    4.590173] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    4.590190] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
[    4.590290] pci 0000:00:14.5: System wakeup disabled by ACPI
[    4.590413] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    4.590520] pci 0000:00:15.0: supports D1 D2
[    4.590560] pci 0000:00:15.0: System wakeup disabled by ACPI
[    4.590676] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    4.590782] pci 0000:00:15.1: supports D1 D2
[    4.590824] pci 0000:00:15.1: System wakeup disabled by ACPI
[    4.590941] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[    4.591054] pci 0000:00:15.2: supports D1 D2
[    4.591095] pci 0000:00:15.2: System wakeup disabled by ACPI
[    4.591213] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[    4.591319] pci 0000:00:15.3: supports D1 D2
[    4.591360] pci 0000:00:15.3: System wakeup disabled by ACPI
[    4.594032] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    4.594050] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
[    4.594151] pci 0000:00:16.0: System wakeup disabled by ACPI
[    4.594272] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    4.594296] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
[    4.594406] pci 0000:00:16.2: supports D1 D2
[    4.594407] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    4.594443] pci 0000:00:16.2: System wakeup disabled by ACPI
[    4.594565] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    4.594697] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    4.594812] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    4.594931] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    4.595070] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    4.595185] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    4.595414] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
[    4.595431] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    4.595444] pci 0000:01:00.0: reg 0x18: [mem 0xfd980000-0xfd9bffff 64bit]
[    4.595452] pci 0000:01:00.0: reg 0x20: [io  0xce00-0xceff]
[    4.595466] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    4.595536] pci 0000:01:00.0: supports D1 D2
[    4.595537] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    4.595648] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
[    4.595667] pci 0000:01:00.1: reg 0x10: [mem 0xfd9fc000-0xfd9fffff 64bit]
[    4.595775] pci 0000:01:00.1: supports D1 D2
[    4.597145] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.597191] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    4.597195] pci 0000:00:02.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    4.597200] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    4.597338] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[    4.597362] pci 0000:02:00.0: reg 0x10: [mem 0xfd0f8000-0xfd0fffff 64bit]
[    4.597480] pci 0000:02:00.0: supports D1 D2
[    4.597481] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.599299] pci 0000:00:09.0: PCI bridge to [bus 02]
[    4.599344] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    4.599348] pci 0000:00:09.0:   bridge window [mem 0xfd000000-0xfd0fffff]
[    4.599353] pci 0000:00:09.0:   bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[    4.599471] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[    4.599486] pci 0000:03:00.0: reg 0x10: [io  0xef00-0xef07]
[    4.599497] pci 0000:03:00.0: reg 0x14: [io  0xee00-0xee03]
[    4.599508] pci 0000:03:00.0: reg 0x18: [io  0xed00-0xed07]
[    4.599519] pci 0000:03:00.0: reg 0x1c: [io  0xec00-0xec03]
[    4.599529] pci 0000:03:00.0: reg 0x20: [io  0xeb00-0xeb0f]
[    4.599540] pci 0000:03:00.0: reg 0x24: [mem 0xfdeff000-0xfdeff1ff]
[    4.599552] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    4.599606] pci 0000:03:00.0: PME# supported from D3hot
[    4.601457] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    4.601503] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    4.601507] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    4.601513] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    4.601636] pci 0000:04:00.0: [1002:6739] type 00 class 0x030000
[    4.601659] pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.601677] pci 0000:04:00.0: reg 0x18: [mem 0xfdcc0000-0xfdcdffff 64bit]
[    4.601689] pci 0000:04:00.0: reg 0x20: [io  0xde00-0xdeff]
[    4.601711] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    4.601774] pci 0000:04:00.0: supports D1 D2
[    4.601873] pci 0000:04:00.1: [1002:aa88] type 00 class 0x040300
[    4.601895] pci 0000:04:00.1: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[    4.602009] pci 0000:04:00.1: supports D1 D2
[    4.603594] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    4.603639] pci 0000:00:0d.0:   bridge window [io  0xd000-0xdfff]
[    4.603642] pci 0000:00:0d.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    4.603650] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.603761] pci 0000:05:0e.0: [1106:3044] type 00 class 0x0c0010
[    4.603789] pci 0000:05:0e.0: reg 0x10: [mem 0xfdbff000-0xfdbff7ff]
[    4.603804] pci 0000:05:0e.0: reg 0x14: [io  0xaf00-0xaf7f]
[    4.603917] pci 0000:05:0e.0: supports D2
[    4.603918] pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold
[    4.604032] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    4.604076] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    4.604080] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    4.604084] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    4.604086] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    4.604087] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    4.604088] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    4.604089] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    4.604090] pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    4.604091] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    4.604220] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    4.604241] pci 0000:06:00.0: reg 0x10: [io  0x9e00-0x9eff]
[    4.604278] pci 0000:06:00.0: reg 0x18: [mem 0xfd7ff000-0xfd7fffff 64bit pref]
[    4.604300] pci 0000:06:00.0: reg 0x20: [mem 0xfd7f8000-0xfd7fbfff 64bit pref]
[    4.604414] pci 0000:06:00.0: supports D1 D2
[    4.604415] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.605705] pci 0000:00:15.0: PCI bridge to [bus 06]
[    4.605751] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
[    4.605755] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    4.605762] pci 0000:00:15.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[    4.605904] pci 0000:07:00.0: [1b6f:7023] type 00 class 0x0c0330
[    4.605932] pci 0000:07:00.0: reg 0x10: [mem 0xfd6f8000-0xfd6fffff 64bit]
[    4.606075] pci 0000:07:00.0: supports D1 D2
[    4.606076] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.607840] pci 0000:00:15.1: PCI bridge to [bus 07]
[    4.607886] pci 0000:00:15.1:   bridge window [io  0x8000-0x8fff]
[    4.607892] pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff]
[    4.607899] pci 0000:00:15.1:   bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[    4.608034] pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
[    4.608052] pci 0000:08:00.0: reg 0x10: [io  0x7f00-0x7f07]
[    4.608066] pci 0000:08:00.0: reg 0x14: [io  0x7e00-0x7e03]
[    4.608079] pci 0000:08:00.0: reg 0x18: [io  0x7d00-0x7d07]
[    4.608092] pci 0000:08:00.0: reg 0x1c: [io  0x7c00-0x7c03]
[    4.608105] pci 0000:08:00.0: reg 0x20: [io  0x7b00-0x7b0f]
[    4.608118] pci 0000:08:00.0: reg 0x24: [mem 0xfd4ff000-0xfd4ff1ff]
[    4.608131] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    4.608197] pci 0000:08:00.0: PME# supported from D3hot
[    4.609994] pci 0000:00:15.2: PCI bridge to [bus 08]
[    4.610046] pci 0000:00:15.2:   bridge window [io  0x7000-0x7fff]
[    4.610050] pci 0000:00:15.2:   bridge window [mem 0xfd400000-0xfd4fffff]
[    4.610056] pci 0000:00:15.2:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
[    4.610170] pci 0000:00:15.3: PCI bridge to [bus 09]
[    4.610216] pci 0000:00:15.3:   bridge window [io  0x6000-0x6fff]
[    4.610220] pci 0000:00:15.3:   bridge window [mem 0xfd200000-0xfd2fffff]
[    4.610227] pci 0000:00:15.3:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[    4.635983] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[    4.636406] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[    4.636837] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[    4.637266] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[    4.637682] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[    4.638108] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[    4.638531] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[    4.638948] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[    4.639695] xen:balloon: Initialising balloon driver
[    4.639900] xen_balloon: Initialising balloon driver
[    4.640109] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    4.640154] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[    4.640196] vgaarb: loaded
[    4.640240] vgaarb: bridge control possible 0000:04:00.0
[    4.640280] vgaarb: bridge control possible 0000:01:00.0
[    4.640467] SCSI subsystem initialized
[    4.640666] libata version 3.00 loaded.
[    4.640906] PCI: Using ACPI for IRQ routing
[    4.652595] PCI: pci_cache_line_size set to 64 bytes
[    4.652603] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    4.652762] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    4.652763] e820: reserve RAM buffer [mem 0xbfda0000-0xbfffffff]
[    4.652764] e820: reserve RAM buffer [mem 0x2402c1000-0x243ffffff]
[    4.653040] Switched to clocksource xen
[    4.658124] pnp: PnP ACPI init
[    4.658170] ACPI: bus type PNP registered
[    4.658298] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    4.658340] system 00:00: [io  0x0220-0x0225] has been reserved
[    4.658381] system 00:00: [io  0x0290-0x0294] has been reserved
[    4.658422] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.681187] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    4.681255] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    4.681308] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    4.681358] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    4.681411] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:08:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    4.681542] system 00:01: [io  0x0900-0x091f] has been reserved
[    4.681583] system 00:01: [io  0x0228-0x022f] has been reserved
[    4.681624] system 00:01: [io  0x040b] has been reserved
[    4.681665] system 00:01: [io  0x04d6] has been reserved
[    4.681706] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    4.681747] system 00:01: [io  0x0c14] has been reserved
[    4.681787] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    4.681828] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    4.681869] system 00:01: [io  0x0c6f] has been reserved
[    4.681910] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    4.681951] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    4.681992] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    4.682033] system 00:01: [io  0x0800-0x08fe] could not be reserved
[    4.682074] system 00:01: [io  0x0a10-0x0a17] has been reserved
[    4.682126] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    4.682167] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    4.682208] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    4.682249] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    4.682291] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.682364] pnp 00:02: [dma 4]
[    4.682430] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    4.682468] xen: registering gsi 8 triggering 1 polarity 0
[    4.682536] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    4.682610] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.682669] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    4.682674] xen: registering gsi 13 triggering 1 polarity 0
[    4.682737] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    4.682966] xen: registering gsi 4 triggering 1 polarity 0
[    4.683044] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.683147] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    4.683189] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.683263] pnp 00:09: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    4.683312] pnp 00:09: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    4.683361] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    4.683410] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    4.683459] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    4.683508] pnp 00:09: disabling [mem 0x00100000-0xbfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    4.683650] system 00:09: [mem 0xbfda0000-0xbfdfffff] could not be reserved
[    4.683691] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[    4.683732] system 00:09: [mem 0xbfe00000-0xbfefffff] has been reserved
[    4.683773] system 00:09: [mem 0xbff00000-0xbfffffff] could not be reserved
[    4.683814] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    4.683855] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[    4.683897] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[    4.683938] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    4.683950] pnp: PnP ACPI: found 10 devices
[    4.683989] ACPI: bus type PNP unregistered
[    4.684055] pciback 0000:00:12.0: seizing device
[    4.684109] pciback 0000:00:12.2: seizing device
[    4.684193] pciback 0000:01:00.0: seizing device
[    4.684236] pciback 0000:01:00.1: seizing device
[    4.687992] PM-Timer failed consistency check  (0xffffff) - aborting.
[    4.688112] pciback 0000:01:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[    4.688153] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.688195] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    4.688240] pci 0000:00:02.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    4.688283] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    4.688329] pci 0000:00:09.0: PCI bridge to [bus 02]
[    4.688370] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    4.688413] pci 0000:00:09.0:   bridge window [mem 0xfd000000-0xfd0fffff]
[    4.688457] pci 0000:00:09.0:   bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[    4.688502] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[    4.688543] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    4.688584] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    4.688627] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    4.688670] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    4.688716] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[    4.688756] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    4.688798] pci 0000:00:0d.0:   bridge window [io  0xd000-0xdfff]
[    4.688842] pci 0000:00:0d.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    4.688885] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.688930] pci 0000:00:14.4: PCI bridge to [bus 05]
[    4.688972] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    4.689016] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    4.689059] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    4.689116] pci 0000:00:15.0: PCI bridge to [bus 06]
[    4.689159] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
[    4.689203] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    4.689247] pci 0000:00:15.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[    4.689293] pci 0000:00:15.1: PCI bridge to [bus 07]
[    4.689335] pci 0000:00:15.1:   bridge window [io  0x8000-0x8fff]
[    4.689379] pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff]
[    4.689423] pci 0000:00:15.1:   bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[    4.689470] pci 0000:08:00.0: BAR 6: assigned [mem 0xfd300000-0xfd30ffff pref]
[    4.689510] pci 0000:00:15.2: PCI bridge to [bus 08]
[    4.689551] pci 0000:00:15.2:   bridge window [io  0x7000-0x7fff]
[    4.689596] pci 0000:00:15.2:   bridge window [mem 0xfd400000-0xfd4fffff]
[    4.689639] pci 0000:00:15.2:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
[    4.689685] pci 0000:00:15.3: PCI bridge to [bus 09]
[    4.689727] pci 0000:00:15.3:   bridge window [io  0x6000-0x6fff]
[    4.689772] pci 0000:00:15.3:   bridge window [mem 0xfd200000-0xfd2fffff]
[    4.689815] pci 0000:00:15.3:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[    4.689862] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    4.689863] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    4.689864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    4.689866] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    4.689867] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    4.689868] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[    4.689869] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    4.689870] pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfd9fffff]
[    4.689871] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    4.689872] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    4.689873] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfd0fffff]
[    4.689874] pci_bus 0000:02: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
[    4.689875] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    4.689876] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[    4.689877] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    4.689878] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    4.689879] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    4.689880] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.689882] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    4.689883] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    4.689884] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff pref]
[    4.689885] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    4.689886] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    4.689887] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    4.689888] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    4.689889] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[    4.689890] pci_bus 0000:05: resource 9 [mem 0xc0000000-0xfebfffff]
[    4.689891] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
[    4.689892] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
[    4.689893] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[    4.689894] pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
[    4.689895] pci_bus 0000:07: resource 1 [mem 0xfd600000-0xfd6fffff]
[    4.689896] pci_bus 0000:07: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[    4.689897] pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
[    4.689898] pci_bus 0000:08: resource 1 [mem 0xfd400000-0xfd4fffff]
[    4.689899] pci_bus 0000:08: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
[    4.689900] pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
[    4.689901] pci_bus 0000:09: resource 1 [mem 0xfd200000-0xfd2fffff]
[    4.689903] pci_bus 0000:09: resource 2 [mem 0xfd100000-0xfd1fffff 64bit pref]
[    4.689921] NET: Registered protocol family 2
[    4.690127] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    4.690382] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    4.690573] TCP: Hash tables configured (established 65536 bind 65536)
[    4.690636] TCP: reno registered
[    4.690693] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    4.690772] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    4.690970] xen: registering gsi 18 triggering 0 polarity 1
[    4.690979] xen: --> pirq=18 -> irq=18 (gsi=18)
[    4.755330] xen: registering gsi 17 triggering 0 polarity 1
[    4.755342] xen: --> pirq=17 -> irq=17 (gsi=17)
[    4.755522] xen: registering gsi 18 triggering 0 polarity 1
[    4.755523] Already setup the GSI :18
[    4.820328] xen: registering gsi 17 triggering 0 polarity 1
[    4.820331] Already setup the GSI :17
[    4.820558] xen: registering gsi 18 triggering 0 polarity 1
[    4.820559] Already setup the GSI :18
[    4.885335] xen: registering gsi 18 triggering 0 polarity 1
[    4.885338] Already setup the GSI :18
[    4.949329] xen: registering gsi 17 triggering 0 polarity 1
[    4.949332] Already setup the GSI :17
[    4.949588] xen: registering gsi 17 triggering 0 polarity 1
[    4.949589] Already setup the GSI :17
[    4.949648] xen: registering gsi 17 triggering 0 polarity 1
[    4.949649] Already setup the GSI :17
[    4.949736] pci 0000:04:00.0: Boot video device
[    4.949825] xen: registering gsi 17 triggering 0 polarity 1
[    4.949826] Already setup the GSI :17
[    4.949885] xen: registering gsi 17 triggering 0 polarity 1
[    4.949886] Already setup the GSI :17
[    4.949972] PCI: CLS 64 bytes, default 64
[    4.951523] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    4.951582] audit: initializing netlink subsys (disabled)
[    4.951631] audit: type=2000 audit(1399664948.142:1): initialized
[    4.955675] VFS: Disk quotas dquot_6.5.2
[    4.955787] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.956485] msgmni has been set to 15912
[    4.956968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.957009] io scheduler noop registered
[    4.957047] io scheduler deadline registered
[    4.957160] io scheduler cfq registered (default)
[    4.957364] xen: registering gsi 18 triggering 0 polarity 1
[    4.957365] Already setup the GSI :18
[    4.957567] xen: registering gsi 18 triggering 0 polarity 1
[    4.957568] Already setup the GSI :18
[    4.957725] xen: registering gsi 17 triggering 0 polarity 1
[    4.957726] Already setup the GSI :17
[    4.957886] xen: registering gsi 17 triggering 0 polarity 1
[    4.957887] Already setup the GSI :17
[    4.958119] xen: registering gsi 17 triggering 0 polarity 1
[    4.958120] Already setup the GSI :17
[    4.958289] xen: registering gsi 17 triggering 0 polarity 1
[    4.958290] Already setup the GSI :17
[    4.959187] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.979954] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.980542] Linux agpgart interface v0.103
[    4.981126] xen:xen_evtchn: Event-channel device installed
[    4.981349] xen: registering gsi 19 triggering 0 polarity 1
[    4.981356] xen: --> pirq=19 -> irq=19 (gsi=19)
[    5.003222] pciback 0000:01:00.0: enabling device (0000 -> 0003)
[    5.003277] xen: registering gsi 18 triggering 0 polarity 1
[    5.003279] Already setup the GSI :18
[    5.025287] xen: registering gsi 17 triggering 0 polarity 1
[    5.025289] Already setup the GSI :17
[    5.047324] xen: registering gsi 18 triggering 0 polarity 1
[    5.047326] Already setup the GSI :18
[    5.047555] xen_pciback: backend is vpci
[    5.047772] Loading iSCSI transport class v2.0-870.
[    5.048227] ahci 0000:00:11.0: version 3.0
[    5.048304] xen: registering gsi 19 triggering 0 polarity 1
[    5.048306] Already setup the GSI :19
[    5.048416] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    5.048458] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    5.049376] scsi0 : ahci
[    5.049617] scsi1 : ahci
[    5.049818] scsi2 : ahci
[    5.050071] scsi3 : ahci
[    5.052823] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[    5.052866] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[    5.052907] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[    5.052948] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[    5.053046] xen: registering gsi 18 triggering 0 polarity 1
[    5.053049] Already setup the GSI :18
[    5.053189] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    5.053232] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    5.053749] scsi4 : ahci
[    5.053948] scsi5 : ahci
[    5.054109] ata5: SATA max UDMA/133 abar m512@0xfdeff000 port 0xfdeff100 irq 68
[    5.054152] ata6: SATA max UDMA/133 abar m512@0xfdeff000 port 0xfdeff180 irq 68
[    5.054235] xen: registering gsi 17 triggering 0 polarity 1
[    5.054236] Already setup the GSI :17
[    5.054367] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    5.054410] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    5.055011] scsi6 : ahci
[    5.055224] scsi7 : ahci
[    5.055369] ata7: SATA max UDMA/133 abar m512@0xfd4ff000 port 0xfd4ff100 irq 69
[    5.055410] ata8: SATA max UDMA/133 abar m512@0xfd4ff000 port 0xfd4ff180 irq 69
[    5.055691] xen: registering gsi 17 triggering 0 polarity 1
[    5.055693] Already setup the GSI :17
[    5.056616] scsi8 : pata_atiixp
[    5.056811] scsi9 : pata_atiixp
[    5.056947] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    5.056988] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    5.057575] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    5.091339] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    5.091380] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    5.341224] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.341481] mousedev: PS/2 mouse device common for all mice
[    5.341609] rtc_cmos 00:04: RTC can wake from S4
[    5.341794] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    5.341867] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram
[    5.341948] md: raid0 personality registered for level 0
[    5.341990] md: raid1 personality registered for level 1
[    5.342160] device-mapper: uevent: version 1.0.3
[    5.342329] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    5.342977] TCP: cubic registered
[    5.343023] Key type dns_resolver registered
[    5.343530] registered taskstats version 1
[    5.344168] rtc_cmos 00:04: setting system clock to 2014-05-09 19:49:08 UTC (1399664948)
[    5.358155] ata4: SATA link down (SStatus 0 SControl 300)
[    5.359147] ata5: SATA link down (SStatus 0 SControl 300)
[    5.360141] ata6: SATA link down (SStatus 0 SControl 300)
[    5.360157] ata8: SATA link down (SStatus 0 SControl 300)
[    5.361152] ata7: SATA link down (SStatus 0 SControl 300)
[    5.512152] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.512209] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.513141] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.513552] ata3.00: ATA-9: M4-CT512M4SSD2, 000F, max UDMA/100
[    5.513594] ata3.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.514029] ata3.00: configured for UDMA/100
[    5.518034] ata2.00: ATA-9: OCZ-VERTEX3 MI, 2.08, max UDMA/133
[    5.518076] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.523816] ata1.00: ATA-8: OCZ-VERTEX3 MI, 2.15, max UDMA/133
[    5.523857] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.528035] ata2.00: configured for UDMA/133
[    5.534188] ata1.00: configured for UDMA/133
[    5.534340] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX3 MI   2.15 PQ: 0 ANSI: 5
[    5.534626] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    5.534782] sd 0:0:0:0: [sda] Write Protect is off
[    5.534827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.534843] scsi 1:0:0:0: Direct-Access     ATA      OCZ-VERTEX3 MI   2.08 PQ: 0 ANSI: 5
[    5.534856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.535220] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    5.535362] sd 1:0:0:0: [sdb] Write Protect is off
[    5.535393] scsi 2:0:0:0: Direct-Access     ATA      M4-CT512M4SSD2   000F PQ: 0 ANSI: 5
[    5.535398]  sda: sda1 sda2 sda3 sda4
[    5.535491] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.535522] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.535710] sd 2:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[    5.535865] sd 2:0:0:0: [sdc] Write Protect is off
[    5.535910] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.535943] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.536042]  sdb: sdb1 sdb2 sdb3 sdb4
[    5.536175] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.536496]  sdc: sdc1
[    5.536631] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.536831] sd 2:0:0:0: [sdc] Attached SCSI disk
[    5.536881] md: Waiting for all devices to be available before autodetect
[    5.536922] md: If you don't use raid, use raid=noautodetect
[    5.537140] md: Autodetecting RAID arrays.
[    5.538001] md: Scanned 6 and added 6 devices.
[    5.538040] md: autorun ...
[    5.538079] md: considering sdb4 ...
[    5.538138] md:  adding sdb4 ...
[    5.538178] md: sdb3 has different UUID to sdb4
[    5.538218] md: sdb1 has different UUID to sdb4
[    5.538259] md:  adding sda4 ...
[    5.538298] md: sda3 has different UUID to sdb4
[    5.538338] md: sda1 has different UUID to sdb4
[    5.538542] md: created md4
[    5.538582] md: bind<sda4>
[    5.538628] md: bind<sdb4>
[    5.538674] md: running: <sdb4><sda4>
[    5.538921] md/raid0:md4: md_size is 284065792 sectors.
[    5.538961] md: RAID0 configuration for md4 - 1 zone
[    5.539001] md: zone0=[sda4/sdb4]
[    5.539154]       zone-offset=         0KB, device-offset=         0KB, size= 142032896KB

[    5.539238] md4: detected capacity change from 0 to 145441685504
[    5.539321] md: considering sdb3 ...
[    5.539362] md:  adding sdb3 ...
[    5.539402] md: sdb1 has different UUID to sdb3
[    5.539443] md:  adding sda3 ...
[    5.539483] md: sda1 has different UUID to sdb3
[    5.539683] md: created md3
[    5.539723] md: bind<sda3>
[    5.539769] md: bind<sdb3>
[    5.539815] md: running: <sdb3><sda3>
[    5.540045] md/raid0:md3: md_size is 167770112 sectors.
[    5.540086] md: RAID0 configuration for md3 - 1 zone
[    5.540134] md: zone0=[sda3/sdb3]
[    5.540279]       zone-offset=         0KB, device-offset=         0KB, size=  83885056KB

[    5.540361] md3: detected capacity change from 0 to 85898297344
[    5.540440] md: considering sdb1 ...
[    5.540481] md:  adding sdb1 ...
[    5.540521] md:  adding sda1 ...
[    5.540711] md: created md1
[    5.540751] md: bind<sda1>
[    5.540797] md: bind<sdb1>
[    5.540843] md: running: <sdb1><sda1>
[    5.541121] md/raid1:md1: active with 2 out of 2 mirrors
[    5.541174] md1: detected capacity change from 0 to 67043328
[    5.541253] md: ... autorun DONE.
[    5.541508]  md3: unknown partition table
[    5.541637] EXT2-fs (md3): error: couldn't mount because of unsupported optional features (240)
[    5.544415] EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null)
[    5.544459] VFS: Mounted root (ext4 filesystem) on device 9:3.
[    5.545311] devtmpfs: mounted
[    5.545651] Freeing unused kernel memory: 856K (ffffffff8165c000 - ffffffff81732000)
[    5.650135] random: nonblocking pool is initialized
[    6.027591] NET: Registered protocol family 1
[    6.039082] systemd-udevd[966]: starting version 212
[    6.085749] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    6.085753] ACPI: Power Button [PWRB]
[    6.085834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    6.085836] ACPI: Power Button [PWRF]
[    6.086210] Warning: Processor Platform Limit not supported.
[    6.089729] ACPI: bus type USB registered
[    6.089758] usbcore: registered new interface driver usbfs
[    6.089771] usbcore: registered new interface driver hub
[    6.090209] usbcore: registered new device driver usb
[    6.093183] xen: registering gsi 17 triggering 0 polarity 1
[    6.093187] Already setup the GSI :17
[    6.093202] QUIRK: Enable AMD PLL fix
[    6.093222] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    6.093227] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    6.093578] hub 1-0:1.0: USB hub found
[    6.093587] hub 1-0:1.0: 2 ports detected
[    6.093678] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    6.093680] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    6.093876] hub 2-0:1.0: USB hub found
[    6.093882] hub 2-0:1.0: 2 ports detected
[    6.094460] xen: registering gsi 17 triggering 0 polarity 1
[    6.094462] Already setup the GSI :17
[    6.094482] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    6.094485] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[    6.094836] hub 3-0:1.0: USB hub found
[    6.094844] hub 3-0:1.0: 2 ports detected
[    6.095064] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    6.095066] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[    6.095223] hub 4-0:1.0: USB hub found
[    6.095231] hub 4-0:1.0: 2 ports detected
[    6.096804] [drm] Initialized drm 1.1.0 20060810
[    6.098341] xen: registering gsi 16 triggering 0 polarity 1
[    6.098351] xen: --> pirq=16 -> irq=16 (gsi=16)
[    6.098467] xen: registering gsi 18 triggering 0 polarity 1
[    6.098468] Already setup the GSI :18
[    6.106450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.107050] ehci-pci: EHCI PCI platform driver
[    6.107198] xen: registering gsi 17 triggering 0 polarity 1
[    6.107200] Already setup the GSI :17
[    6.108310] ehci-pci 0000:00:13.2: EHCI Host Controller
[    6.108319] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[    6.108322] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    6.108336] ehci-pci 0000:00:13.2: debug port 1
[    6.108401] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
[    6.110143] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.112116] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.112126] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.112164] xen: registering gsi 17 triggering 0 polarity 1
[    6.112166] Already setup the GSI :17
[    6.112585] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000cb2000, 50:e5:49:47:f2:2d, XID 0c900800 IRQ 73
[    6.112587] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    6.113196] xen: registering gsi 22 triggering 0 polarity 1
[    6.113211] xen: --> pirq=22 -> irq=22 (gsi=22)
[    6.113377] [drm] radeon kernel modesetting enabled.
[    6.113467] xen: registering gsi 17 triggering 0 polarity 1
[    6.113469] Already setup the GSI :17
[    6.114273] [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1787:0x2304).
[    6.114296] [drm] register mmio base: 0xFDCC0000
[    6.114297] [drm] register mmio size: 131072
[    6.114344] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    6.114531] hub 5-0:1.0: USB hub found
[    6.114538] hub 5-0:1.0: 5 ports detected
[    6.114825] xen: registering gsi 17 triggering 0 polarity 1
[    6.114827] Already setup the GSI :17
[    6.114854] ehci-pci 0000:00:16.2: EHCI Host Controller
[    6.114859] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
[    6.114864] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    6.114881] ehci-pci 0000:00:16.2: debug port 1
[    6.114963] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
[    6.116926] ATOM BIOS: BARTS
[    6.117931] radeon 0000:04:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    6.117932] radeon 0000:04:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    6.117934] Failed to add WC MTRR for [00000000d0000000-00000000dfffffff]; performance may suffer.
[    6.117935] [drm] Detected VRAM RAM=1024M, BAR=256M
[    6.117936] [drm] RAM width 256bits DDR
[    6.118200] [TTM] Zone  kernel: Available graphics memory: 4074046 kiB
[    6.118201] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    6.118202] [TTM] Initializing pool allocator
[    6.118205] [TTM] Initializing DMA pool allocator
[    6.118350] [drm] radeon: 1024M of VRAM memory ready
[    6.118351] [drm] radeon: 1024M of GTT memory ready.
[    6.118422] [drm] Loading BARTS Microcode
[    6.118495] [drm] Internal thermal controller with fan control
[    6.118958] == power state 0 ==
[    6.118959] 	ui class: none
[    6.118959] 	internal class: boot 
[    6.118982] 	caps: 
[    6.119003] 	uvd    vclk: 0 dclk: 0
[    6.119004] 		power level 0    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.119025] 		power level 1    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.119026] 		power level 2    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.119046] 	status: c r b 
[    6.119048] == power state 1 ==
[    6.119068] 	ui class: performance
[    6.119068] 	internal class: none
[    6.119139] 	caps: 
[    6.119140] 	uvd    vclk: 0 dclk: 0
[    6.119140] 		power level 0    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.119141] 		power level 1    sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[    6.119142] 		power level 2    sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[    6.119142] 	status: 
[    6.119143] == power state 2 ==
[    6.119143] 	ui class: none
[    6.119144] 	internal class: uvd 
[    6.119145] 	caps: video 
[    6.119145] 	uvd    vclk: 54000 dclk: 40000
[    6.119146] 		power level 0    sclk: 30000 mclk: 100000 vddc: 950 vddci: 1100
[    6.119147] 		power level 1    sclk: 30000 mclk: 100000 vddc: 950 vddci: 1100
[    6.119148] 		power level 2    sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[    6.119298] 	status: 
[    6.119299] == power state 3 ==
[    6.119319] 	ui class: none
[    6.119319] 	internal class: uvd_mvc 
[    6.119341] 	caps: video 
[    6.119342] 	uvd    vclk: 70000 dclk: 56000
[    6.119410] 		power level 0    sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[    6.119411] 		power level 1    sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[    6.119412] 		power level 2    sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[    6.119412] 	status: 
[    6.120105] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    6.120355] hub 6-0:1.0: USB hub found
[    6.120362] hub 6-0:1.0: 4 ports detected
[    6.120607] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20131218/utaddress-258)
[    6.120611] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.122667] ohci-pci: OHCI PCI platform driver
[    6.122804] xen: registering gsi 18 triggering 0 polarity 1
[    6.122806] Already setup the GSI :18
[    6.122827] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    6.122833] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[    6.122906] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
[    6.134281] AVX version of gcm_enc/dec engaged.
[    6.134469] [drm] radeon: dpm initialized
[    6.134708] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.140580] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    6.166164] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    6.177624] hub 7-0:1.0: USB hub found
[    6.177634] hub 7-0:1.0: 5 ports detected
[    6.178228] xen: registering gsi 18 triggering 0 polarity 1
[    6.178231] Already setup the GSI :18
[    6.178260] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    6.178266] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[    6.178300] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
[    6.185587]  md1: unknown partition table
[    6.186486]  md4: p1 p2 p3 p4
[    6.204666] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[    6.205002] radeon 0000:04:00.0: WB enabled
[    6.205005] radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022e559c00
[    6.205006] radeon 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88022e559c0c
[    6.221560] radeon 0000:04:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90011d32118
[    6.221562] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.221563] [drm] Driver supports precise vblank timestamp query.
[    6.221620] radeon 0000:04:00.0: radeon: using MSI.
[    6.221655] [drm] radeon: irq initialized.
[    6.233411] hub 8-0:1.0: USB hub found
[    6.233421] hub 8-0:1.0: 2 ports detected
[    6.233667] xen: registering gsi 18 triggering 0 polarity 1
[    6.233670] Already setup the GSI :18
[    6.233701] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    6.233705] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[    6.233731] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
[    6.238668] [drm] ring test on 0 succeeded in 3 usecs
[    6.238732] [drm] ring test on 3 succeeded in 1 usecs
[    6.288283] hub 9-0:1.0: USB hub found
[    6.288292] hub 9-0:1.0: 4 ports detected
[    6.416131] usb 5-3: new high-speed USB device number 2 using ehci-pci
[    6.426007] [drm] ring test on 5 succeeded in 2 usecs
[    6.426014] [drm] UVD initialized successfully.
[    6.426377] [drm] ib test on ring 0 succeeded in 0 usecs
[    6.426428] [drm] ib test on ring 3 succeeded in 0 usecs
[    6.531171] hub 5-3:1.0: USB hub found
[    6.531268] hub 5-3:1.0: 4 ports detected
[    6.578826] [drm] ib test on ring 5 succeeded
[    6.580017] [drm] Radeon Display Connectors
[    6.580018] [drm] Connector 0:
[    6.580018] [drm]   DP-1
[    6.580019] [drm]   HPD4
[    6.580020] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    6.580021] [drm]   Encoders:
[    6.580021] [drm]     DFP1: INTERNAL_UNIPHY2
[    6.580022] [drm] Connector 1:
[    6.580022] [drm]   HDMI-A-1
[    6.580023] [drm]   HPD5
[    6.580024] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    6.580024] [drm]   Encoders:
[    6.580025] [drm]     DFP2: INTERNAL_UNIPHY2
[    6.580025] [drm] Connector 2:
[    6.580026] [drm]   DVI-I-1
[    6.580026] [drm]   HPD6
[    6.580027] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    6.580028] [drm]   Encoders:
[    6.580028] [drm]     DFP3: INTERNAL_UNIPHY
[    6.580029] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.580029] [drm] Connector 3:
[    6.580030] [drm]   DVI-D-1
[    6.580030] [drm]   HPD1
[    6.580031] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    6.580032] [drm]   Encoders:
[    6.580032] [drm]     DFP4: INTERNAL_UNIPHY1
[    6.580226] switching from power state:
[    6.580227] 	ui class: none
[    6.580228] 	internal class: boot 
[    6.580229] 	caps: 
[    6.580230] 	uvd    vclk: 0 dclk: 0
[    6.580231] 		power level 0    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.580232] 		power level 1    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.580232] 		power level 2    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.580233] 	status: c b 
[    6.580234] switching to power state:
[    6.580234] 	ui class: performance
[    6.580235] 	internal class: none
[    6.580235] 	caps: 
[    6.580236] 	uvd    vclk: 0 dclk: 0
[    6.580237] 		power level 0    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.580237] 		power level 1    sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[    6.580238] 		power level 2    sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[    6.580239] 	status: r 
[    6.651323] [drm] fb mappable at 0xD0474000
[    6.651324] [drm] vram apper at 0xD0000000
[    6.651324] [drm] size 16384000
[    6.651325] [drm] fb depth is 24
[    6.651326] [drm]    pitch is 10240
[    6.651398] fbcon: radeondrmfb (fb0) is primary device
[    6.651852] switching from power state:
[    6.651853] 	ui class: performance
[    6.651854] 	internal class: none
[    6.651854] 	caps: 
[    6.651855] 	uvd    vclk: 0 dclk: 0
[    6.651855] 		power level 0    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.651856] 		power level 1    sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[    6.651857] 		power level 2    sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[    6.651857] 	status: c r 
[    6.651857] switching to power state:
[    6.651858] 	ui class: performance
[    6.651858] 	internal class: none
[    6.651859] 	caps: 
[    6.651859] 	uvd    vclk: 0 dclk: 0
[    6.651860] 		power level 0    sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[    6.651860] 		power level 1    sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[    6.651861] 		power level 2    sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[    6.651861] 	status: c r 
[    6.667157] firewire_core 0000:05:0e.0: created device fw0: GUID 00656f1c2c389b00, S400
[    6.806229] usb 5-3.1: new full-speed USB device number 3 using ehci-pci
[    6.842382] Console: switching to colour frame buffer device 320x100
[    6.892339] radeon 0000:04:00.0: fb0: radeondrmfb frame buffer device
[    6.892340] radeon 0000:04:00.0: registered panic notifier
[    6.892380] [drm] Initialized radeon 2.37.0 20080528 for 0000:04:00.0 on minor 0
[    6.912753] usbcore: registered new interface driver usbhid
[    6.912754] usbhid: USB HID core driver
[    6.970199] usb 5-3.3: new full-speed USB device number 4 using ehci-pci
[    7.061596] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:13.2/usb5/5-3/5-3.3/5-3.3:1.0/0003:046D:C049.0002/input/input3
[    7.061679] hid-generic 0003:046D:C049.0002: input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.2-3.3/input0
[    7.063681] hid-generic 0003:046D:C049.0003: device has no listeners, quitting
[    7.137172] usb 5-3.4: new low-speed USB device number 5 using ehci-pci
[    7.246994] input: HID 046a:0023 as /devices/pci0000:00/0000:00:13.2/usb5/5-3/5-3.4/5-3.4:1.0/0003:046A:0023.0004/input/input4
[    7.247051] cherry 0003:046A:0023.0004: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:13.2-3.4/input0
[    7.257856] input: HID 046a:0023 as /devices/pci0000:00/0000:00:13.2/usb5/5-3/5-3.4/5-3.4:1.1/0003:046A:0023.0005/input/input5
[    7.257904] cherry 0003:046A:0023.0005: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:13.2-3.4/input1
[   16.913411] hid-generic 0003:0409:02BA.0001: timeout initializing reports
[   16.913414] hid-generic 0003:0409:02BA.0001: device has no listeners, quitting
[   16.914252] hid-generic 0003:046D:C049.0003: device has no listeners, quitting
[   17.489186] RPC: Registered named UNIX socket transport module.
[   17.489188] RPC: Registered udp transport module.
[   17.489188] RPC: Registered tcp transport module.
[   17.489189] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.517502] tun: Universal TUN/TAP device driver, 1.6
[   17.517504] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   17.543275] it87: Found IT8720F chip at 0x228, revision 8
[   17.543299] it87: Routing internal VCCH to in7
[   17.543303] it87: Beeping is supported
[   19.470684] Adding 4194300k swap on /dev/sda2.  Priority:1 extents:1 across:4194300k SSFS
[   19.471785] Adding 4194300k swap on /dev/sdb2.  Priority:1 extents:1 across:4194300k SSFS
[   19.511575] EXT4-fs (md4p1): mounted filesystem without journal. Opts: (null)
[   19.514204] EXT4-fs (md4p2): mounted filesystem without journal. Opts: (null)
[   19.515572] EXT4-fs (md4p3): mounted filesystem without journal. Opts: (null)
[   19.517603] EXT4-fs (md4p4): mounted filesystem with ordered data mode. Opts: (null)
[   19.522644] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   20.559884] NET: Registered protocol family 10
[   20.579079] r8169 0000:06:00.0: Direct firmware load failed with error -2
[   20.579081] r8169 0000:06:00.0: Falling back to user helper
[   20.579412] r8169 0000:06:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[   20.591154] r8169 0000:06:00.0 eth0: link down
[   20.591183] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.591187] r8169 0000:06:00.0 eth0: link down
[   20.593128] device eth0 entered promiscuous mode
[   20.598832] device br0 entered promiscuous mode
[   20.600506] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[   21.294574] xen_acpi_processor: Uploading Xen processor PM info
[   23.463239] r8169 0000:06:00.0 eth0: link up
[   23.463249] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.463765] br0: port 1(eth0) entered forwarding state
[   23.463772] br0: port 1(eth0) entered forwarding state
[   23.463802] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   38.478193] br0: port 1(eth0) entered forwarding state
[   92.073585] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
[   94.142347] EXT4-fs (md3): re-mounted. Opts: commit=0
[   94.148200] EXT4-fs (md4p1): re-mounted. Opts: commit=0
[   94.151151] EXT4-fs (md4p2): re-mounted. Opts: commit=0
[   94.157315] EXT4-fs (md4p3): re-mounted. Opts: commit=0
[   94.162030] EXT4-fs (md4p4): re-mounted. Opts: commit=0
[   94.169660] EXT4-fs (sdc1): re-mounted. Opts: commit=0
[  115.594905] NFS: Registering the id_resolver key type
[  115.594924] Key type id_resolver registered
[  115.594926] Key type id_legacy registered

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

             reply	other threads:[~2014-05-09 18:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-09 18:30 Michael Mair-Keimberger [this message]
2014-05-09 18:43 ` [BUG] (hvm)-virtualization doesn't work with xen 4.4 Andrew Cooper
2014-05-10  9:30   ` Michael Mair-Keimberger
2014-05-10 10:08     ` Fabio Fantoni
2014-05-10 10:14       ` Fabio Fantoni
2014-05-10 17:47         ` Michael Mair-Keimberger
2014-05-10 18:18           ` Fabio Fantoni
2014-05-11 11:26             ` Michael Mair-Keimberger
2014-05-12  8:50   ` Jan Beulich
  -- strict thread matches above, loose matches on Subject: below --
2014-05-05 19:17 Michael Mair-Keimberger
2014-05-05 19:38 ` Andrew Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140509183043.GA3261@asterix \
    --to=m.mairkeimberger@gmail.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.