From: Denys Dmytriyenko <denys@ti.com>
To: <hzhang@ti.com>
Cc: meta-ti@yoctoproject.org
Subject: Re: [PATCH 1/3] keystone: machine config: change machine config name from keystone-evm to k2hk-evm
Date: Fri, 16 May 2014 15:19:26 -0400 [thread overview]
Message-ID: <20140516191926.GG18053@edge> (raw)
In-Reply-To: <1400267633-24410-1-git-send-email-hzhang@ti.com>
On Fri, May 16, 2014 at 03:13:53PM -0400, hzhang@ti.com wrote:
> From: Hao Zhang <hzhang@ti.com>
Please pass -M and/or --find-copies-harder when calling format-patch.
> Keystone II SOC family has multiple devices and EVMs: k2hk, k2l
> and k2e, each EVM should have a separate machine config, and share
> the common keystone SOC family.
>
> Signed-off-by: Hao Zhang <hzhang@ti.com>
> ---
> conf/machine/k2hk-evm.conf | 26 ++++++++++++++++++++++++
> conf/machine/keystone-evm.conf | 26 ------------------------
> recipes-bsp/boot-monitor/boot-monitor_git.bb | 2 +-
> recipes-kernel/linux/linux-keystone-rt_3.10.bb | 2 +-
> recipes-kernel/linux/linux-keystone_3.10.bb | 2 +-
> 5 files changed, 29 insertions(+), 29 deletions(-)
> create mode 100644 conf/machine/k2hk-evm.conf
> delete mode 100644 conf/machine/keystone-evm.conf
>
> diff --git a/conf/machine/k2hk-evm.conf b/conf/machine/k2hk-evm.conf
> new file mode 100644
> index 0000000..088e524
> --- /dev/null
> +++ b/conf/machine/k2hk-evm.conf
> @@ -0,0 +1,26 @@
> +#@TYPE: Machine
> +#@NAME: Keystone 2 machine
> +#@DESCRIPTION: Machine configuration for the TI Keystone 2
> +
> +require conf/machine/include/keystone.inc
> +
> +IMAGE_FSTYPES += "ubi tar.gz cpio"
> +
> +SERIAL_CONSOLE = "115200 ttyS0"
> +
> +SYSVINIT_ENABLED_GETTYS = ""
> +
> +# do ubiattach /dev/ubi_ctrl -m 4
> +# From dmesg:
> +# UBI: smallest flash I/O unit: 2048
> +# UBI: logical eraseblock size: 126976 bytes
> +# from ubiattach stdout:
> +# UBI device number 0, total 3856 LEBs
> +MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
> +
> +# do ubiattach /dev/ubi_ctrl -m 4
> +# from dmesg:
> +# UBI: smallest flash I/O unit: 2048
> +# UBI: physical eraseblock size: 131072 bytes (128 KiB)
> +# UBI: sub-page size: 2048
> +UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"
> diff --git a/conf/machine/keystone-evm.conf b/conf/machine/keystone-evm.conf
> deleted file mode 100644
> index 088e524..0000000
> --- a/conf/machine/keystone-evm.conf
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -#@TYPE: Machine
> -#@NAME: Keystone 2 machine
> -#@DESCRIPTION: Machine configuration for the TI Keystone 2
> -
> -require conf/machine/include/keystone.inc
> -
> -IMAGE_FSTYPES += "ubi tar.gz cpio"
> -
> -SERIAL_CONSOLE = "115200 ttyS0"
> -
> -SYSVINIT_ENABLED_GETTYS = ""
> -
> -# do ubiattach /dev/ubi_ctrl -m 4
> -# From dmesg:
> -# UBI: smallest flash I/O unit: 2048
> -# UBI: logical eraseblock size: 126976 bytes
> -# from ubiattach stdout:
> -# UBI device number 0, total 3856 LEBs
> -MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
> -
> -# do ubiattach /dev/ubi_ctrl -m 4
> -# from dmesg:
> -# UBI: smallest flash I/O unit: 2048
> -# UBI: physical eraseblock size: 131072 bytes (128 KiB)
> -# UBI: sub-page size: 2048
> -UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"
> diff --git a/recipes-bsp/boot-monitor/boot-monitor_git.bb b/recipes-bsp/boot-monitor/boot-monitor_git.bb
> index 7c5e9cf..0b559fa 100644
> --- a/recipes-bsp/boot-monitor/boot-monitor_git.bb
> +++ b/recipes-bsp/boot-monitor/boot-monitor_git.bb
> @@ -9,7 +9,7 @@ BOOT_MONITOR_MAKE_TARGET ?= "all"
>
> LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
>
> -COMPATIBLE_MACHINE = "keystone-evm"
> +COMPATIBLE_MACHINE = "k2hk-evm"
>
> SRC_URI = "git://git.ti.com/keystone-linux/boot-monitor.git;protocol=git;branch=${BRANCH}"
>
> diff --git a/recipes-kernel/linux/linux-keystone-rt_3.10.bb b/recipes-kernel/linux/linux-keystone-rt_3.10.bb
> index cbd02d6..eb4bbd2 100644
> --- a/recipes-kernel/linux/linux-keystone-rt_3.10.bb
> +++ b/recipes-kernel/linux/linux-keystone-rt_3.10.bb
> @@ -13,7 +13,7 @@ require recipes-kernel/linux/setup-defconfig.inc
> MACHINE_KERNEL_PR_append = "c+gitr${SRCPV}"
> PR = "${MACHINE_KERNEL_PR}"
>
> -KERNEL_DEVICETREE_keystone-evm = "k2hk-evm.dtb"
> +KERNEL_DEVICETREE_k2hk-evm = "k2hk-evm.dtb"
>
> KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
>
> diff --git a/recipes-kernel/linux/linux-keystone_3.10.bb b/recipes-kernel/linux/linux-keystone_3.10.bb
> index 54cb86a..93b5481 100644
> --- a/recipes-kernel/linux/linux-keystone_3.10.bb
> +++ b/recipes-kernel/linux/linux-keystone_3.10.bb
> @@ -13,7 +13,7 @@ require recipes-kernel/linux/setup-defconfig.inc
> MACHINE_KERNEL_PR_append = "c+gitr${SRCPV}"
> PR = "${MACHINE_KERNEL_PR}"
>
> -KERNEL_DEVICETREE_keystone-evm = "k2hk-evm.dtb"
> +KERNEL_DEVICETREE_k2hk-evm = "k2hk-evm.dtb"
>
> KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
>
> --
> 1.7.9.5
>
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
next prev parent reply other threads:[~2014-05-16 19:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 19:13 [PATCH 1/3] keystone: machine config: change machine config name from keystone-evm to k2hk-evm hzhang
2014-05-16 19:19 ` Denys Dmytriyenko [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-05-16 19:22 hzhang
2014-05-16 19:33 ` Denys Dmytriyenko
2014-05-16 19:40 ` Hao Zhang
2014-05-16 19:56 ` Denys Dmytriyenko
2014-05-16 19:58 ` Hao Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140516191926.GG18053@edge \
--to=denys@ti.com \
--cc=hzhang@ti.com \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.