[PATCH] extcon: arizona: support inverted jack detect switch

[Richard Fitzgerald <rf@opensource.wolfsonmicro.com>]

Add pdata option for inverted jack detect switch that
opens when jack is inserted.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
 drivers/extcon/extcon-arizona.c   |   29 +++++++++++++++++++++--------
 include/linux/mfd/arizona/pdata.h |    3 +++
 2 files changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 98a14f6..af926b9 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -962,10 +962,16 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 
 	if (arizona->pdata.jd_gpio5) {
 		mask = ARIZONA_MICD_CLAMP_STS;
-		present = 0;
+		if (arizona->pdata.jd_invert)
+			present = ARIZONA_MICD_CLAMP_STS;
+		else
+			present = 0;
 	} else {
 		mask = ARIZONA_JD1_STS;
-		present = ARIZONA_JD1_STS;
+		if (arizona->pdata.jd_invert)
+			present = 0;
+		else
+			present = ARIZONA_JD1_STS;
 	}
 
 	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
@@ -1096,6 +1102,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	struct arizona_pdata *pdata = &arizona->pdata;
 	struct arizona_extcon_info *info;
 	unsigned int val;
+	unsigned int clamp_mode;
 	int jack_irq_fall, jack_irq_rise;
 	int ret, mode, i, j;
 
@@ -1302,16 +1309,22 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 			regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
 				     val);
 
-			regmap_update_bits(arizona->regmap,
-					   ARIZONA_MICD_CLAMP_CONTROL,
-					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x9);
+			if (arizona->pdata.jd_invert)
+				clamp_mode = 0xb;
+			else
+				clamp_mode = 0x9;
 		} else {
-			regmap_update_bits(arizona->regmap,
-					   ARIZONA_MICD_CLAMP_CONTROL,
-					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x4);
+			if (arizona->pdata.jd_invert)
+				clamp_mode = 0x5;
+			else
+				clamp_mode = 0x4;
 		}
 
 		regmap_update_bits(arizona->regmap,
+				   ARIZONA_MICD_CLAMP_CONTROL,
+				   ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode);
+
+		regmap_update_bits(arizona->regmap,
 				   ARIZONA_JACK_DETECT_DEBOUNCE,
 				   ARIZONA_MICD_CLAMP_DB,
 				   ARIZONA_MICD_CLAMP_DB);
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 12a5c13..4578c72 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -127,6 +127,9 @@ struct arizona_pdata {
 	/** Internal pull on GPIO5 is disabled when used for jack detection */
 	bool jd_gpio5_nopull;
 
+	/** set to true if jackdet contact opens on insert */
+	bool jd_invert;
+
 	/** Use the headphone detect circuit to identify the accessory */
 	bool hpdet_acc_id;
 
-- 
1.7.2.5