Re: [PATCH 2/8] mmc: sdhci-st: STMicroelectronics SDHCI binding documentation.

[Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

> This patch adds the device tree binding documentation for ST
> SDHCI driver. It contains the differences between the core properties
> in mmc.txt and the properties used by the sdhci-st driver.
> 
> Signed-off-by: Peter Griffin <peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mmc/sdhci-st.txt | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-st.txt
> 
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
> new file mode 100644
> index 0000000..ae3dae0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
> @@ -0,0 +1,26 @@
> +* STMicroelectronics sdhci-st MMC/SD controller
> +
> +This file documents differences between the core properties in mmc.txt

Where is mmc.txt?

> +and the properties used by the sdhci-st driver
> +
> +Required properties:
> +- compatible: "st,sdhci"
> +- clocks: card clock, must be "mmc".

This isn't correct.  I think you mean it must be a phandle to the
'mmc' clock.  It's also worth referencing the clock DT documentation
here.

> +Optional properties:
> +- reset: to provide a reset to the HC.

What is it; integer, string, phandle, something else?

> +- non-removable: non-removable slot (bindings/mmc/mmc.txt).

This however, _is_ a string, so you need to put it in "'s like you did
with "mmc" above and/or reference the file which documents it.

> +
> +Example:
> +
> +mmc0: sdhci@fe81e000 {
> +	compatible	= "st,sdhci";
> +	status		= "disabled";
> +	reg		= <0xfe81e000 0x1000>;
> +	interrupts	= <GIC_SPI 127 IRQ_TYPE_NONE>;
> +	interrupt-names	= "mmcirq";
> +	pinctrl-names	= "default";
> +	pinctrl-0	= <&pinctrl_mmc0>;
> +	clock-names	= "mmc";

I don't think you need clock-names if you only have one clock.

> +	clocks		= <&clk_s_a1_ls 1>;
> +};

Once fixed you can add my Ack for the next submission:

  Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html