From: Borislav Petkov <bp@alien8.de>
To: "Ertman, DavidX M" <davidx.m.ertman@intel.com>
Cc: "Fujinaka, Todd" <todd.fujinaka@intel.com>,
"e1000-devel@lists.sourceforge.net"
<e1000-devel@lists.sourceforge.net>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>,
"Ronciak, John" <john.ronciak@intel.com>
Subject: e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
Date: Fri, 23 May 2014 18:16:19 +0200 [thread overview]
Message-ID: <20140523161619.GF21332@pd.tnic> (raw)
In-Reply-To: <20140410163339.GL29093@pd.tnic>
Hi guys,
again a hardware hang, this time on my workstation with 3.15-rc6:
It happened during a suspend-to-disk attempt doing:
echo 3 > /proc/sys/vm/drop_caches
echo "shutdown" > /sys/power/disk
echo "disk" > /sys/power/state
The box came right back up and dmesg said:
[ 294.132711] hib.sh (2254): drop_caches: 3
[ 294.559897] PM: Syncing filesystems ... done.
[ 294.582962] Freezing user space processes ... (elapsed 0.015 seconds) done.
[ 294.606714] PM: Preallocating image memory... done (allocated 147807 pages)
[ 294.906232] PM: Allocated 591228 kbytes in 0.29 seconds (2038.71 MB/s)
[ 294.912795] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 294.923896] serial 00:09: disabled
[ 294.924048] i8042 kbd 00:08: System wakeup enabled by ACPI
[ 294.924476] nouveau [ DRM] suspending display...
[ 294.924694] nouveau [ DRM] unpinning framebuffer(s)...
[ 294.925098] nouveau [ DRM] evicting buffers...
[ 295.070410] nouveau [ DRM] waiting for kernel channels to go idle...
[ 295.070694] nouveau [ DRM] suspending client object trees...
[ 295.071235] nouveau [ DRM] suspending kernel object tree...
[ 296.435639] PM: freeze of devices complete after 1513.693 msecs
[ 296.437013] PM: late freeze of devices complete after 1.134 msecs
[ 296.439230] PM: noirq freeze of devices complete after 1.975 msecs
[ 296.439480] Disabling non-boot CPUs ...
[ 296.442481] kvm: disabling virtualization on CPU1
[ 296.443273] smpboot: CPU 1 is now offline
[ 296.446958] kvm: disabling virtualization on CPU2
[ 296.447512] smpboot: CPU 2 is now offline
[ 296.449853] kvm: disabling virtualization on CPU3
[ 296.450388] smpboot: CPU 3 is now offline
[ 296.452738] kvm: disabling virtualization on CPU4
[ 296.453269] smpboot: CPU 4 is now offline
[ 296.455420] kvm: disabling virtualization on CPU5
[ 296.455613] smpboot: CPU 5 is now offline
[ 296.457781] kvm: disabling virtualization on CPU6
[ 296.457973] smpboot: CPU 6 is now offline
[ 296.460264] kvm: disabling virtualization on CPU7
[ 296.460460] smpboot: CPU 7 is now offline
[ 296.461718] PM: Creating hibernation image:
[ 296.652835] PM: Need to copy 150757 pages
[ 297.096476] PM: Hibernation image created (150757 pages copied)
[ 296.463242] microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
[ 296.463581] Enabling non-boot CPUs ...
[ 296.463998] x86: Booting SMP configuration:
[ 296.464161] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 296.475592] kvm: enabling virtualization on CPU1
[ 296.478860] microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
[ 296.479103] CPU1 is up
[ 296.479251] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 296.490562] kvm: enabling virtualization on CPU2
[ 296.493462] microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
[ 296.493702] CPU2 is up
[ 296.493842] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 296.505131] kvm: enabling virtualization on CPU3
[ 296.508150] microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
[ 296.508392] CPU3 is up
[ 296.508532] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 296.519835] kvm: enabling virtualization on CPU4
[ 296.522742] microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
[ 296.522986] CPU4 is up
[ 296.523126] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 296.534432] kvm: enabling virtualization on CPU5
[ 296.537336] microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
[ 296.537628] CPU5 is up
[ 296.537766] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 296.549081] kvm: enabling virtualization on CPU6
[ 296.552051] microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
[ 296.552296] CPU6 is up
[ 296.552439] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 296.563736] kvm: enabling virtualization on CPU7
[ 296.566810] microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
[ 296.567053] CPU7 is up
[ 296.575584] PM: noirq thaw of devices complete after 1.113 msecs
[ 296.577011] PM: early thaw of devices complete after 1.117 msecs
[ 296.577598] e1000e 0000:00:19.0: irq 73 for MSI/MSI-X
[ 296.577614] nouveau [ DRM] re-enabling device...
[ 296.577624] nouveau [ DRM] resuming kernel object tree...
[ 296.577633] nouveau [ VBIOS][0000:03:00.0] running init tables
[ 296.578310] i8042 kbd 00:08: System wakeup disabled by ACPI
[ 296.579194] serial 00:09: activated
[ 296.588124] snd_hda_intel 0000:00:1b.0: irq 75 for MSI/MSI-X
[ 296.588765] megasas: Waiting for FW to come to ready state
[ 296.602572] megasas: FW now in Ready state
[ 296.602652] megaraid_sas 0000:04:00.0: irq 84 for MSI/MSI-X
[ 296.645901] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 296.653425] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 296.882443] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 296.894256] ata1.00: configured for UDMA/100
[ 296.899303] nouveau [ VOLT][0000:03:00.0] GPU voltage: 900000uv
[ 296.905646] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 296.912342] nouveau [ CLK][0000:03:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 296.921316] nouveau [ DRM] resuming client object trees...
[ 296.927510] nouveau [ DRM] resuming display...
[ 296.977712] PM: thaw of devices complete after 400.618 msecs
[ 296.984852] PM: Cannot find swap device, try swapon -a.
[ 296.990310] PM: Cannot get swap writer
[ 297.075181] Restarting tasks ... done.
[ 309.022159] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
[ 309.022159] TDH <0>
[ 309.022159] TDT <6>
[ 309.022159] next_to_use <6>
[ 309.022159] next_to_clean <0>
[ 309.022159] buffer_info[next_to_clean]:
[ 309.022159] time_stamp <ffffefc5>
[ 309.022159] next_to_watch <1>
[ 309.022159] jiffies <100001e11>
[ 309.022159] next_to_watch.status <0>
[ 309.022159] MAC Status <43>
[ 309.022159] PHY Status <796d>
[ 309.022159] PHY 1000BASE-T Status <0>
[ 309.022159] PHY Extended Status <3000>
[ 309.022159] PCI Status <10>
[ 311.021049] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
[ 311.021049] TDH <0>
[ 311.021049] TDT <6>
[ 311.021049] next_to_use <6>
[ 311.021049] next_to_clean <0>
[ 311.021049] buffer_info[next_to_clean]:
[ 311.021049] time_stamp <ffffefc5>
[ 311.021049] next_to_watch <1>
[ 311.021049] jiffies <1000025e1>
[ 311.021049] next_to_watch.status <0>
[ 311.021049] MAC Status <43>
[ 311.021049] PHY Status <796d>
[ 311.021049] PHY 1000BASE-T Status <0>
[ 311.021049] PHY Extended Status <3000>
[ 311.021049] PCI Status <10>
[ 312.043582] ------------[ cut here ]------------
[ 312.048470] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x276/0x280()
[ 312.056968] NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out
[ 312.057025] Modules linked in: ext2 vfat fat fuse loop dm_crypt dm_mod x86_pkg_temp_thermal coretemp kvm_intel kvm crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw snd_hda_codec_realtek snd_hda_codec_hdmi gf128mul ablk_helper usbhid snd_hda_codec_generic cryptd snd_hda_intel snd_hda_controller snd_hda_codec iTCO_wdt xhci_hcd sb_edac ehci_pci microcode edac_core iTCO_vendor_support pcspkr ehci_hcd evdev dcdbas button snd_hwdep snd_pcm usbcore acpi_cpufreq snd_timer processor snd i2c_i801 lpc_ich mfd_core usb_common soundcore
[ 312.057029] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc6+ #1
[ 312.057030] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013
[ 312.057035] 0000000000000009 ffff88043e223d68 ffffffff8170edda ffff88043e223db0
[ 312.057039] ffff88043e223da0 ffffffff81065b7d 0000000000000000 ffff8804365b4000
[ 312.057042] ffff8804364ed480 0000000000000001 0000000000000001 ffff88043e223e00
[ 312.057043] Call Trace:
[ 312.057052] <IRQ> [<ffffffff8170edda>] dump_stack+0x4e/0x7a
[ 312.057057] [<ffffffff81065b7d>] warn_slowpath_common+0x7d/0xa0
[ 312.057061] [<ffffffff81065bec>] warn_slowpath_fmt+0x4c/0x50
[ 312.057064] [<ffffffff816403e6>] dev_watchdog+0x276/0x280
[ 312.057068] [<ffffffff81640170>] ? dev_graft_qdisc+0x80/0x80
[ 312.057072] [<ffffffff81072c6a>] call_timer_fn+0x7a/0x1a0
[ 312.057075] [<ffffffff81072bf5>] ? call_timer_fn+0x5/0x1a0
[ 312.057079] [<ffffffff81640170>] ? dev_graft_qdisc+0x80/0x80
[ 312.057082] [<ffffffff810730e4>] run_timer_softirq+0x264/0x310
[ 312.057087] [<ffffffff8106b549>] __do_softirq+0x139/0x3a0
[ 312.057091] [<ffffffff8106bb65>] irq_exit+0x115/0x120
[ 312.057097] [<ffffffff817232c5>] smp_apic_timer_interrupt+0x45/0x60
[ 312.057101] [<ffffffff81721c72>] apic_timer_interrupt+0x72/0x80
[ 312.057108] <EOI> [<ffffffff815d3474>] ? cpuidle_enter_state+0x54/0xd0
[ 312.057112] [<ffffffff815d3470>] ? cpuidle_enter_state+0x50/0xd0
[ 312.057116] [<ffffffff815d3527>] cpuidle_enter+0x17/0x20
[ 312.057120] [<ffffffff810b0d65>] cpu_startup_entry+0x335/0x4c0
[ 312.057126] [<ffffffff8104402b>] start_secondary+0x1fb/0x270
[ 312.057129] ---[ end trace 3aa454781533e361 ]---
[ 312.057296] e1000e 0000:00:19.0 eth0: Reset adapter unexpectedly
[ 313.826071] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 313.833622] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
Thanks.
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
next prev parent reply other threads:[~2014-05-23 16:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-10 11:59 e1000e 0000:00:19.0 eth0: Hardware Error Borislav Petkov
2014-04-10 14:59 ` [E1000-devel] " Fujinaka, Todd
2014-04-10 14:59 ` Fujinaka, Todd
2014-04-10 15:45 ` [E1000-devel] " Ertman, DavidX M
2014-04-10 15:45 ` Ertman, DavidX M
2014-04-10 16:33 ` [E1000-devel] " Borislav Petkov
2014-05-23 16:16 ` Borislav Petkov [this message]
2014-04-10 15:54 ` Ronciak, John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140523161619.GF21332@pd.tnic \
--to=bp@alien8.de \
--cc=davidx.m.ertman@intel.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=john.ronciak@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=todd.fujinaka@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.