From: Bjorn Helgaas <bhelgaas@google.com>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI: Test for std config alias when testing extended config space
Date: Tue, 27 May 2014 15:09:48 -0600 [thread overview]
Message-ID: <20140527210948.GB11907@google.com> (raw)
In-Reply-To: <20140505201835.2466.46125.stgit@bling.home>
On Mon, May 05, 2014 at 02:20:51PM -0600, Alex Williamson wrote:
> When a PCI-to-PCIe bridge is stacked on a PCIe-to-PCI bridge, we can
> have PCIe endpoints masked by a conventional PCI bus. This makes the
> extended config space of the PCIe endpoing inaccessible. The PCIe-to-
> PCI bridge is supposed to handle any type 1 configuration transactions
> where the extended config offset bits are non-zero as an Unsupported
> Request rather than forward it to the secondary interface. As noted
> here, there are a couple known offenders to this rule. These bridges
> drop the extended offset bits, resulting in the conventional config
> space being aliased many times across the extended config space. For
> Intel NICs, this alias often seems to expose a bogus SR-IOV cap.
>
> Stacking bridges may seem like an uncommon scenario, but note that the
> any conventional PCI slot in a modern PC is already the secondary
> interface of an onboard PCIe-to-PCI bridge. The user need only add
> a PCI-to-PCIe adapter and PCIe device to encounter this problem.
>
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Applied to pci/misc for v3.16, thanks!
> ---
> drivers/pci/probe.c | 39 ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index ef09f5f..fdb0182 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -984,6 +984,43 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev)
>
>
> /**
> + * pci_ext_cfg_is_aliased - is ext config space just an alias of std config?
> + * @dev: PCI device
> + *
> + * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that
> + * when forwarding a type1 configuration request the bridge must check that
> + * the extended register address field is zero. The bridge is not permitted
> + * to forward the transactions and must handle it as an Unsupported Request.
> + * Some bridges do not follow this rule and simply drop the extended register
> + * bits, resulting in the standard config space being aliased, every 256
> + * bytes across the entire configuration space. Test for this condition by
> + * comparing the first dword of each potential alias to the vendor/device ID.
> + * Known offenders:
> + * ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03)
> + * AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40)
> + */
> +static bool pci_ext_cfg_is_aliased(struct pci_dev *dev)
> +{
> +#ifdef CONFIG_PCI_QUIRKS
> + int pos;
> + u32 header, tmp;
> +
> + pci_read_config_dword(dev, PCI_VENDOR_ID, &header);
> +
> + for (pos = PCI_CFG_SPACE_SIZE;
> + pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) {
> + if (pci_read_config_dword(dev, pos, &tmp) != PCIBIOS_SUCCESSFUL
> + || header != tmp)
> + return false;
> + }
> +
> + return true;
> +#else
> + return false;
> +#endif
> +}
> +
> +/**
> * pci_cfg_space_size - get the configuration space size of the PCI device.
> * @dev: PCI device
> *
> @@ -1001,7 +1038,7 @@ static int pci_cfg_space_size_ext(struct pci_dev *dev)
>
> if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
> goto fail;
> - if (status == 0xffffffff)
> + if (status == 0xffffffff || pci_ext_cfg_is_aliased(dev))
> goto fail;
>
> return PCI_CFG_SPACE_EXP_SIZE;
>
prev parent reply other threads:[~2014-05-27 21:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-05 20:20 [PATCH] PCI: Test for std config alias when testing extended config space Alex Williamson
2014-05-27 21:09 ` Bjorn Helgaas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140527210948.GB11907@google.com \
--to=bhelgaas@google.com \
--cc=alex.williamson@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.