From: Ingo Molnar <mingo@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] x86/irq changes for v3.16
Date: Thu, 12 Jun 2014 16:01:05 +0200 [thread overview]
Message-ID: <20140612140105.GA9060@gmail.com> (raw)
Linus,
Please pull the latest x86-irq-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-irq-for-linus
# HEAD: fb24da805729ee4a83efa34015948f7d64da4b28 x86/irq: Fix fixup_irqs() error handling
Two changes: a cpu-hotplug/irq race fix, plus a HyperV related fix.
Thanks,
Ingo
------------------>
K. Y. Srinivasan (1):
x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately
Prarit Bhargava (1):
x86/irq: Fix fixup_irqs() error handling
arch/x86/kernel/apic/io_apic.c | 28 ++++++++++++++++++----------
arch/x86/kernel/cpu/mshyperv.c | 9 ---------
arch/x86/kernel/i8259.c | 20 +++++++++++++++++++-
arch/x86/kernel/irq.c | 13 +++++++++----
4 files changed, 46 insertions(+), 24 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 6ad4658..b4b21db 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2312,7 +2312,7 @@ int __ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
int err;
if (!config_enabled(CONFIG_SMP))
- return -1;
+ return -EPERM;
if (!cpumask_intersects(mask, cpu_online_mask))
return -EINVAL;
@@ -2343,7 +2343,7 @@ int native_ioapic_set_affinity(struct irq_data *data,
int ret;
if (!config_enabled(CONFIG_SMP))
- return -1;
+ return -EPERM;
raw_spin_lock_irqsave(&ioapic_lock, flags);
ret = __ioapic_set_affinity(data, mask, &dest);
@@ -3075,9 +3075,11 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
struct irq_cfg *cfg = data->chip_data;
struct msi_msg msg;
unsigned int dest;
+ int ret;
- if (__ioapic_set_affinity(data, mask, &dest))
- return -1;
+ ret = __ioapic_set_affinity(data, mask, &dest);
+ if (ret)
+ return ret;
__get_cached_msi_msg(data->msi_desc, &msg);
@@ -3177,9 +3179,11 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
struct irq_cfg *cfg = data->chip_data;
unsigned int dest, irq = data->irq;
struct msi_msg msg;
+ int ret;
- if (__ioapic_set_affinity(data, mask, &dest))
- return -1;
+ ret = __ioapic_set_affinity(data, mask, &dest);
+ if (ret)
+ return ret;
dmar_msi_read(irq, &msg);
@@ -3226,9 +3230,11 @@ static int hpet_msi_set_affinity(struct irq_data *data,
struct irq_cfg *cfg = data->chip_data;
struct msi_msg msg;
unsigned int dest;
+ int ret;
- if (__ioapic_set_affinity(data, mask, &dest))
- return -1;
+ ret = __ioapic_set_affinity(data, mask, &dest);
+ if (ret)
+ return ret;
hpet_msi_read(data->handler_data, &msg);
@@ -3295,9 +3301,11 @@ ht_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
{
struct irq_cfg *cfg = data->chip_data;
unsigned int dest;
+ int ret;
- if (__ioapic_set_affinity(data, mask, &dest))
- return -1;
+ ret = __ioapic_set_affinity(data, mask, &dest);
+ if (ret)
+ return ret;
target_ht_irq(data->irq, dest, cfg->vector);
return IRQ_SET_MASK_OK_NOCOPY;
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 76f98fe..a450373 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -132,15 +132,6 @@ static void __init ms_hyperv_init_platform(void)
lapic_timer_frequency = hv_lapic_frequency;
printk(KERN_INFO "HyperV: LAPIC Timer Frequency: %#x\n",
lapic_timer_frequency);
-
- /*
- * On Hyper-V, when we are booting off an EFI firmware stack,
- * we do not have many legacy devices including PIC, PIT etc.
- */
- if (efi_enabled(EFI_BOOT)) {
- printk(KERN_INFO "HyperV: Using null_legacy_pic\n");
- legacy_pic = &null_legacy_pic;
- }
}
#endif
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 2e977b5..8af8171 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -299,13 +299,31 @@ static void unmask_8259A(void)
static void init_8259A(int auto_eoi)
{
unsigned long flags;
+ unsigned char probe_val = ~(1 << PIC_CASCADE_IR);
+ unsigned char new_val;
i8259A_auto_eoi = auto_eoi;
raw_spin_lock_irqsave(&i8259A_lock, flags);
- outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
+ /*
+ * Check to see if we have a PIC.
+ * Mask all except the cascade and read
+ * back the value we just wrote. If we don't
+ * have a PIC, we will read 0xff as opposed to the
+ * value we wrote.
+ */
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
+ outb(probe_val, PIC_MASTER_IMR);
+ new_val = inb(PIC_MASTER_IMR);
+ if (new_val != probe_val) {
+ printk(KERN_INFO "Using NULL legacy PIC\n");
+ legacy_pic = &null_legacy_pic;
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+ return;
+ }
+
+ outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
/*
* outb_pic - this has to work on a wide range of PC hardware.
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 283a76a..49bbb57 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -357,6 +357,7 @@ void fixup_irqs(void)
struct irq_desc *desc;
struct irq_data *data;
struct irq_chip *chip;
+ int ret;
for_each_irq_desc(irq, desc) {
int break_affinity = 0;
@@ -395,10 +396,14 @@ void fixup_irqs(void)
if (!irqd_can_move_in_process_context(data) && chip->irq_mask)
chip->irq_mask(data);
- if (chip->irq_set_affinity)
- chip->irq_set_affinity(data, affinity, true);
- else if (!(warned++))
- set_affinity = 0;
+ if (chip->irq_set_affinity) {
+ ret = chip->irq_set_affinity(data, affinity, true);
+ if (ret == -ENOSPC)
+ pr_crit("IRQ %d set affinity failed because there are no available vectors. The device assigned to this IRQ is unstable.\n", irq);
+ } else {
+ if (!(warned++))
+ set_affinity = 0;
+ }
/*
* We unmask if the irq was not marked masked by the
reply other threads:[~2014-06-12 14:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140612140105.GA9060@gmail.com \
--to=mingo@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.