From: Neil Horman <nhorman-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: Bruce Richardson
<bruce.richardson-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: dev-VfR2kkLFssw@public.gmane.org
Subject: Re: [PATCH] skeleton app: Very simple code for l2fwding
Date: Thu, 26 Jun 2014 16:38:44 -0400 [thread overview]
Message-ID: <20140626203844.GA639@localhost.localdomain> (raw)
In-Reply-To: <1403814160-19613-1-git-send-email-bruce.richardson-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
On Thu, Jun 26, 2014 at 09:22:40PM +0100, Bruce Richardson wrote:
> This is a very simple example app for doing packet forwarding with the
> Intel DPDK. It's designed to serve as a start point for people new to
> the Intel DPDK and who want to develop a new app.
>
> Therefore it's meant to:
> * have as good a performance out-of-the-box as possible, using the
> best-known settings for configuring the PMDs, so that any new apps can
> be based off it.
> * be kept as short as possible to make it easy to understand it and get
> started with it.
>
> Signed-off-by: Bruce Richardson <bruce.richardson-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Isn't there already an l2fwd example app?
Neil
> ---
> examples/Makefile | 1 +
> examples/skeleton_app/Makefile | 57 ++++++++++
> examples/skeleton_app/basicfwd.c | 236 +++++++++++++++++++++++++++++++++++++++
> examples/skeleton_app/basicfwd.h | 46 ++++++++
> 4 files changed, 340 insertions(+)
> create mode 100644 examples/skeleton_app/Makefile
> create mode 100644 examples/skeleton_app/basicfwd.c
> create mode 100644 examples/skeleton_app/basicfwd.h
>
> diff --git a/examples/Makefile b/examples/Makefile
> index 4353b84..2605d1d 100644
> --- a/examples/Makefile
> +++ b/examples/Makefile
> @@ -60,6 +60,7 @@ DIRS-y += netmap_compat/bridge
> DIRS-$(CONFIG_RTE_LIBRTE_METER) += qos_meter
> DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += qos_sched
> DIRS-y += quota_watermark
> +DIRS-y += skeleton_app
> DIRS-y += timer
> DIRS-y += vhost
> DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
> diff --git a/examples/skeleton_app/Makefile b/examples/skeleton_app/Makefile
> new file mode 100644
> index 0000000..244f4ef
> --- /dev/null
> +++ b/examples/skeleton_app/Makefile
> @@ -0,0 +1,57 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +ifeq ($(RTE_SDK),)
> +$(error "Please define RTE_SDK environment variable")
> +endif
> +
> +# Default target, can be overriden by command line or environment
> +RTE_TARGET ?= x86_64-default-linuxapp-gcc
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# binary name
> +APP = basicfwd
> +
> +# all source are stored in SRCS-y
> +SRCS-y := basicfwd.c
> +
> +CFLAGS += $(WERROR_FLAGS)
> +
> +# workaround for a gcc bug with noreturn attribute
> +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
> +CFLAGS_main.o += -Wno-return-type
> +endif
> +
> +EXTRA_CFLAGS += -O3 -g -Wfatal-errors
> +
> +include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/skeleton_app/basicfwd.c b/examples/skeleton_app/basicfwd.c
> new file mode 100644
> index 0000000..bf51a9d
> --- /dev/null
> +++ b/examples/skeleton_app/basicfwd.c
> @@ -0,0 +1,236 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <stdint.h>
> +#include <inttypes.h>
> +#include <rte_eal.h>
> +#include <rte_ethdev.h>
> +#include <rte_cycles.h>
> +#include <rte_lcore.h>
> +#include <rte_mbuf.h>
> +#include "basicfwd.h"
> +
> +#define RX_RING_SIZE 128
> +#define RX_FREE_THRESH 32
> +#define RX_PTHRESH 8
> +#define RX_HTHRESH 8
> +#define RX_WTHRESH 0
> +
> +#define TX_RING_SIZE 512
> +#define TX_FREE_THRESH 32
> +#define TX_PTHRESH 32
> +#define TX_HTHRESH 0
> +#define TX_WTHRESH 0
> +#define TX_RSBIT_THRESH 32
> +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
> + ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> + ETH_TXQ_FLAGS_NOXSUMTCP)
> +
> +#define NUM_MBUFS 8191
> +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
> +#define MBUF_CACHE_SIZE 250
> +#define BURST_SIZE 32
> +
> +static struct rte_eth_conf port_conf_default = {
> + .rxmode = {
> + .mq_mode = ETH_MQ_RX_NONE,
> + .max_rx_pkt_len = ETHER_MAX_LEN,
> + .split_hdr_size = 0,
> + .header_split = 0, /**< Header Split disabled */
> + .hw_ip_checksum = 0, /**< IP checksum offload enabled */
> + .hw_vlan_filter = 0, /**< VLAN filtering disabled */
> + .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
> + .hw_strip_crc = 0, /**< CRC stripped by hardware */
> + },
> + .txmode = {
> + .mq_mode = ETH_MQ_TX_NONE,
> + },
> + .lpbk_mode = 0,
> +};
> +
> +static const struct rte_eth_rxconf rx_conf_default = {
> + .rx_thresh = {
> + .pthresh = RX_PTHRESH,
> + .hthresh = RX_HTHRESH,
> + .wthresh = RX_WTHRESH,
> + },
> + .rx_free_thresh = RX_FREE_THRESH,
> + .rx_drop_en = 0,
> +};
> +
> +static struct rte_eth_txconf tx_conf_default = {
> + .tx_thresh = {
> + .pthresh = TX_PTHRESH,
> + .hthresh = TX_HTHRESH,
> + .wthresh = TX_WTHRESH,
> + },
> + .tx_free_thresh = TX_FREE_THRESH,
> + .tx_rs_thresh = TX_RSBIT_THRESH,
> + .txq_flags = TX_Q_FLAGS
> +
> +};
> +
> +
> +/*
> + * Initialises a given port using global settings and with the rx buffers
> + * coming from the mbuf_pool passed as parameter
> + */
> +static inline int
> +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> +{
> + struct rte_eth_conf port_conf = port_conf_default;
> + const uint16_t rxRings = 1, txRings = 1;
> + int retval;
> + uint16_t q;
> +
> + if (port >= rte_eth_dev_count())
> + return -1;
> +
> + retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> + if (retval != 0)
> + return retval;
> +
> + for (q = 0; q < rxRings; q++) {
> + retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> + rte_eth_dev_socket_id(port), &rx_conf_default,
> + mbuf_pool);
> + if (retval < 0)
> + return retval;
> + }
> +
> + for (q = 0; q < txRings; q++) {
> + retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> + rte_eth_dev_socket_id(port), &tx_conf_default);
> + if (retval < 0)
> + return retval;
> + }
> +
> + retval = rte_eth_dev_start(port);
> + if (retval < 0)
> + return retval;
> +
> + struct ether_addr addr;
> + rte_eth_macaddr_get(port, &addr);
> + printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> + " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> + (unsigned)port,
> + addr.addr_bytes[0], addr.addr_bytes[1],
> + addr.addr_bytes[2], addr.addr_bytes[3],
> + addr.addr_bytes[4], addr.addr_bytes[5]);
> +
> + rte_eth_promiscuous_enable(port);
> +
> + return 0;
> +}
> +
> +/*
> + * Main thread that does the work, reading from INPUT_PORT
> + * and writing to OUTPUT_PORT
> + */
> +static __attribute__((noreturn)) void
> +lcore_main(void)
> +{
> + const uint8_t nb_ports = rte_eth_dev_count();
> + uint8_t port;
> + for (port = 0; port < nb_ports; port++)
> + if (rte_eth_dev_socket_id(port) > 0 &&
> + rte_eth_dev_socket_id(port) !=
> + (int)rte_socket_id())
> + printf("WARNING, port %u is on remote NUMA node to "
> + "polling thread.\n\tPerformance will "
> + "not be optimal.\n", port);
> +
> + printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
> + rte_lcore_id());
> + for (;;) {
> + for (port = 0; port < nb_ports; port++) {
> + struct rte_mbuf *bufs[BURST_SIZE];
> + const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
> + bufs, BURST_SIZE);
> + if (unlikely(nb_rx == 0))
> + continue;
> + const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0,
> + bufs, nb_rx);
> + if (unlikely(nb_tx < nb_rx)) {
> + uint16_t buf;
> + for (buf = nb_tx; buf < nb_rx; buf++)
> + rte_pktmbuf_free(bufs[buf]);
> + }
> + }
> + }
> +}
> +
> +/* Main function, does initialisation and calls the per-lcore functions */
> +int
> +MAIN(int argc, char *argv[])
> +{
> + struct rte_mempool *mbuf_pool;
> + unsigned nb_ports;
> + uint8_t portid;
> +
> + /* init EAL */
> + int ret = rte_eal_init(argc, argv);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
> + argc -= ret;
> + argv += ret;
> +
> + if (rte_eal_pci_probe() != 0)
> + rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
> +
> + nb_ports = rte_eth_dev_count();
> + if (nb_ports < 2 || (nb_ports & 1))
> + rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
> +
> + mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
> + MBUF_SIZE, MBUF_CACHE_SIZE,
> + sizeof(struct rte_pktmbuf_pool_private),
> + rte_pktmbuf_pool_init, NULL,
> + rte_pktmbuf_init, NULL,
> + rte_socket_id(), 0);
> + if (mbuf_pool == NULL)
> + rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
> +
> + /* initialize all ports */
> + for (portid = 0; portid < nb_ports; portid++)
> + if (port_init(portid, mbuf_pool) != 0)
> + rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8"\n",
> + portid);
> +
> + if (rte_lcore_count() > 1)
> + printf("\nWARNING: Coremask too big - App uses only 1 lcore\n");
> +
> + /* call lcore_main on master core only */
> + lcore_main();
> + return 0;
> +}
> diff --git a/examples/skeleton_app/basicfwd.h b/examples/skeleton_app/basicfwd.h
> new file mode 100644
> index 0000000..2682d15
> --- /dev/null
> +++ b/examples/skeleton_app/basicfwd.h
> @@ -0,0 +1,46 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _MAIN_H_
> +#define _MAIN_H_
> +
> +
> +#ifdef RTE_EXEC_ENV_BAREMETAL
> +#define MAIN _main
> +#else
> +#define MAIN main
> +#endif
> +
> +int MAIN(int argc, char *argv[]);
> +
> +#endif /* ifndef _MAIN_H_ */
> --
> 1.9.3
>
>
next prev parent reply other threads:[~2014-06-26 20:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-26 20:22 [PATCH] skeleton app: Very simple code for l2fwding Bruce Richardson
[not found] ` <1403814160-19613-1-git-send-email-bruce.richardson-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-06-26 20:38 ` Neil Horman [this message]
[not found] ` <20140626203844.GA639-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-06-26 20:56 ` Vincent JARDIN
[not found] ` <53AC891B.7040609-pdR9zngts4EAvxtiuMwx3w@public.gmane.org>
2014-06-26 21:00 ` Richardson, Bruce
2014-11-13 12:20 ` Thomas Monjalon
2014-11-13 13:06 ` Bruce Richardson
2014-11-14 14:31 ` [PATCH v2] " Bruce Richardson
[not found] ` <1415975510-24015-1-git-send-email-bruce.richardson-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-11-26 14:38 ` [PATCH v3] examples/skeleton: very simple code for packet forwarding Thomas Monjalon
[not found] ` <1417012687-18812-1-git-send-email-thomas.monjalon-pdR9zngts4EAvxtiuMwx3w@public.gmane.org>
2014-11-26 15:42 ` Thomas Monjalon
2014-11-26 15:49 ` Bruce Richardson
2014-11-26 16:26 ` Thomas Monjalon
2014-11-26 16:29 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140626203844.GA639@localhost.localdomain \
--to=nhorman-2xusbdqka4r54taoqtywwq@public.gmane.org \
--cc=bruce.richardson-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=dev-VfR2kkLFssw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.