From: "Michael Büsch" <m@bues.ch>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>,
"Bryn M. Reeves" <bmr@redhat.com>,
linux-scsi@vger.kernel.org, linux-usb@vger.kernel.org,
usb-storage@lists.one-eyed-alien.net
Subject: Re: External USB3 disk fails with "Invalid field in cdb"
Date: Fri, 27 Jun 2014 20:51:53 +0200 [thread overview]
Message-ID: <20140627205153.6a8ac916@wiggum> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1406271440130.875-100000@iolanthe.rowland.org>
[-- Attachment #1: Type: text/plain, Size: 5734 bytes --]
On Fri, 27 Jun 2014 14:42:01 -0400 (EDT)
Alan Stern <stern@rowland.harvard.edu> wrote:
> Michael, can you post the "lsusb -v" output for this device? I see it
> is made by JMicron; they are notorious for buggy USB-ATA bridges.
Of course. Here you go:
Bus 004 Device 009: ID 152d:0567 JMicron Technology Corp. / JMicron USA Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
idProduct 0x0567
bcdDevice 1.14
iManufacturer 1 JMicron
iProduct 2 USB to ATA/ATAPI Bridge
iSerial 3 xxx
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 121
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB Mass Storage
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 6 MSC Bulk-Only Transport
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 10 MSC USB Attached SCSI
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
MaxStreams 16
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 16
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 16
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
Device Status: 0x000d
Self Powered
U1 Enabled
U2 Enabled
MaxPower=2mA is a nice guess for a hard disk. ;)
--
Michael
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-06-27 18:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-26 18:55 External USB3 disk fails with "Invalid field in cdb" Michael Büsch
2014-06-27 10:15 ` Bryn M. Reeves
2014-06-27 12:22 ` Michael Büsch
2014-06-27 15:34 ` Michael Büsch
2014-06-27 15:48 ` James Bottomley
2014-06-27 17:55 ` Michael Büsch
2014-06-27 18:42 ` Alan Stern
2014-06-27 18:51 ` Michael Büsch [this message]
2014-06-27 19:23 ` [usb-storage] " Alan Stern
2014-06-27 19:52 ` Michael Büsch
2014-06-30 13:55 ` Michael Büsch
2014-06-30 15:04 ` [PATCH] usb-storage/SCSI: Add broken_fua blacklist flag Alan Stern
2014-06-30 15:16 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1406301115010.1550-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-06-30 16:28 ` Greg KH
2014-06-30 14:12 ` [usb-storage] Re: External USB3 disk fails with "Invalid field in cdb" James Bottomley
[not found] ` <1404137562.2994.0.camel-doHRWNlmrt9+urZeOPWqwQ@public.gmane.org>
2014-06-30 14:27 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140627205153.6a8ac916@wiggum \
--to=m@bues.ch \
--cc=James.Bottomley@HansenPartnership.com \
--cc=bmr@redhat.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.