From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: dove (marvell A510) crash on boot with config_preempt
Date: Sun, 6 Jul 2014 08:08:45 +0200 [thread overview]
Message-ID: <20140706080845.723e9787@armhf> (raw)
Since the official 3.15.0 release, the kernel crashes at boot time
when compiled with the option CONFIG_PREEMPT.
Reverting the commit 431a84b1a4f7d1a0085d5b91330c5053cc8e8b12
ARM: 8034/1: Disable preemption in iwmmxt_task_enable()
removes the problem.
Linux version 3.16.0-rc3-00062-gd92a333-dirty (jef at armhf) (gcc version 4.8.3 (Debian 4.8.3-4) ) #5 PREEMPT Thu Jul 3 19:46:39 CEST 2014
CPU: ARMv7 Processor [560f5815] revision 5 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: SolidRun CuBox
cma: CMA: reserved 64 MiB at 3c000000
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
Kernel command line: console=ttyS0,115200n8 console=tty1,115200 root=/dev/sda2 rootwait video=HDMI-A-1:1920x1080-32 at 60
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 968540K/1048576K available (3791K kernel code, 152K rwdata, 1012K rodata, 141K init, 135K bss, 80036K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
lowmem : 0x80000000 - 0xc0000000 (1024 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x804b8f0c (4804 kB)
.init : 0x804b9000 - 0x804dc754 ( 142 kB)
.data : 0x804de000 - 0x805043c0 ( 153 kB)
.bss : 0x805043cc - 0x805260b8 ( 136 kB)
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 789.70 BogoMIPS (lpj=3948544)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x3b9950 - 0x3b9984
devtmpfs: initialized
VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 5
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Dove 88AP510 SoC
Tauros2: Disabling L2 prefetch.
Tauros2: Disabling line fill burt8.
Tauros2: Enabling L2 cache.
Tauros2: L2 cache support initialised in ARMv7 mode.
reg-fixed-voltage regulators:regulator at 1: could not find pctldev for node /mbus/internal-regs/pin-ctrl at d0200/pmx-gpio-1, deferring probe
platform regulators:regulator at 1: Driver reg-fixed-voltage requests probe deferral
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Switched to clocksource orion_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
futex hash table entries: 256 (order: -1, 3072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.090:1): initialized
msgmni has been set to 2019
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dove-pinctrl f10d0200.pin-ctrl: falling back to hardcoded PMU resource
dove-pinctrl f10d0200.pin-ctrl: [Firmware Bug]: Missing pinctrl regs in DTB. Please update your firmware.
dove-pinctrl f10d0200.pin-ctrl: registered pinctrl driver
irq: Cannot allocate irq_descs @ IRQ38, assuming pre-allocated
irq: Cannot allocate irq_descs @ IRQ70, assuming pre-allocated
mv_xor f1060800.dma-engine: Marvell shared XOR driver
mv_xor f1060800.dma-engine: Marvell XOR: ( xor cpy )
mv_xor f1060800.dma-engine: Marvell XOR: ( xor cpy )
mv_xor f1060900.dma-engine: Marvell shared XOR driver
mv_xor f1060900.dma-engine: Marvell XOR: ( xor cpy )
mv_xor f1060900.dma-engine: Marvell XOR: ( xor cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
console [ttyS0] disabled
f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 10416666) is a 16550A
console [ttyS0] enabled
brd: module loaded
sata_mv f10a0000.sata-host: slots 32 ports 1
scsi0 : sata_mv
ata1: SATA max UDMA/133 irq 29
libphy: orion_mdio_bus: probed
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:b6:3b:10
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-orion: EHCI orion driver
orion-ehci f1050000.usb-host: EHCI Host Controller
orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1
orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000
orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
orion-ehci f1051000.usb-host: EHCI Host Controller
orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2
orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000
orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on f1092000.sdio-host [f1092000.sdio-host] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
ThumbEE CPU extension supported.
PJ4 iWMMXt v2 coprocessor enabled.
USB Power: 5000 mV
rtc-mv f10d8500.real-time-clock: setting system clock to 2014-07-04 07:37:21 UTC (1404459441)
mmc0: new high speed SDHC card at address e624
mmcblk0: mmc0:e624 SU16G 14.8 GiB
mmcblk0: p1 p2 p3
usb 1-1: new high-speed USB device number 2 using orion-ehci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
ata1.00: ATA-8: WDC WD10EARX-32N0YB0, 51.0AB51, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EARX-32N AB51 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
usb-storage 1-1:1.0: USB Mass Storage device detected
sd 0:0:0:0: [sda] 4096-byte physical blocks
scsi1 : usb-storage 1-1:1.0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
usb 2-1: new high-speed USB device number 2 using orion-ehci
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
devtmpfs: mounted
Freeing unused kernel memory: 140K (804b9000 - 804dc000)
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.3: new low-speed USB device number 3 using orion-ehci
input: Generic USB K/B as /devices/mbus/mbus:internal-regs/f1051000.usb-host/usb2/2-1/2-1.3/2-1.3:1.0/0003:13BA:0017.0001/input/input0
hid-generic 0003:13BA:0017.0001: input: USB HID v1.10 Keyboard [Generic USB K/B] on usb-f1051000.usb-host-1.3/input0
input: Generic USB K/B as /devices/mbus/mbus:internal-regs/f1051000.usb-host/usb2/2-1/2-1.3/2-1.3:1.1/0003:13BA:0017.0002/input/input1
hid-generic 0003:13BA:0017.0002: input: USB HID v1.10 Mouse [Generic USB K/B] on usb-f1051000.usb-host-1.3/input1
usb 2-1.4: new high-speed USB device number 4 using orion-ehci
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.01 PQ: 0 ANSI: 2
sd 1:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] No Caching mode page found
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1.4.2: new low-speed USB device number 5 using orion-ehci
input: Dell Dell USB Optical Mouse as /devices/mbus/mbus:internal-regs/f1051000.usb-host/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2:1.0/0003:413C:3012.0003/input/input2
hid-generic 0003:413C:3012.0003: input: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-f1051000.usb-host-1.4.2/input0
usb 2-1.4.3: new high-speed USB device number 6 using orion-ehci
Unable to handle kernel paging request at virtual address fffffffe
pgd = bb25c000
[fffffffe] *pgd=3bfde821, *pte=00000000, *ppte=00000000
Internal error: Oops: 80000007 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 62 Comm: startpar Not tainted 3.16.0-rc3-00062-gd92a333-dirty #5
task: bb230b80 ti: bb256000 task.ti: bb256000
PC is at 0xfffffffe
LR is at iwmmxt_task_copy+0x44/0x4c
pc : [<fffffffe>] lr : [<800130ac>] psr: 40000033
sp : bb257de8 ip : 00000013 fp : bb257ea4
r10: bb256000 r9 : fffffdfe r8 : 76e898e6
r7 : bb257ec8 r6 : bb256000 r5 : 7ea12760 r4 : 000000a0
r3 : ffffffff r2 : 00000003 r1 : bb257df8 r0 : 00000000
Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user
Control: 10c5387d Table: 3b25c019 DAC: 00000015
Process startpar (pid: 62, stack limit = 0xbb256248)
Stack: (0xbb257de8 to 0xbb258000)
7de0: bb1b32a0 bb218890 12ef842a 000000a0 00000000 00000000
7e00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7e60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7e80: 00000000 00000000 00000000 00000000 00000000 7ea12678 bb257ec4 bb257ea8
7ea0: 80010d04 80010b28 5ac3c35a bb257fb0 7ea12678 00000000 bb257f8c bb257ec8
7ec0: 80011190 80010b7c 0000af65 14000000 76e98cb1 08010a00 00000000 00000011
7ee0: 00000000 00040001 00000040 00000000 00000000 00000001 00000001 00000008
7f00: bb257f24 bb257f10 80029bc0 80027734 bb257f28 bb257f58 bb257f44 7ea12978
7f20: 00000008 7ea12978 00000008 00000000 00000000 00000000 bb257fa4 bb257f48
7f40: 800bf418 800be3f4 bb257f70 bb257f58 bb257f70 00000000 7ffabef8 00000011
7f60: 00010000 bb256010 bb256000 8000e904 bb257fb0 8000e904 bb256000 00020000
7f80: bb257fac bb257f90 80011468 80010e98 7ea12978 7ea12980 7ea12b44 0000014f
7fa0: 00000000 bb257fb0 8000e7c0 800113e4 fffffffc 00000000 00000000 00000000
7fc0: 7ea12978 7ea12980 7ea12b44 0000014f 00000000 00016210 00002030 00000001
7fe0: 0000014f 7ea12968 76f010e9 76e898e6 00000030 00000000 00000000 00000000
Backtrace:
[<80010b1c>] (preserve_iwmmxt_context) from [<80010d04>] (setup_sigframe+0x194/0x1a8)
r5:7ea12678 r4:00000000
[<80010b70>] (setup_sigframe) from [<80011190>] (do_signal+0x304/0x448)
r6:00000000 r5:7ea12678 r4:bb257fb0 r3:5ac3c35a
[<80010e8c>] (do_signal) from [<80011468>] (do_work_pending+0x90/0xd0)
r10:00020000 r9:bb256000 r8:8000e904 r7:bb257fb0 r6:8000e904 r5:bb256000
r4:bb256010
[<800113d8>] (do_work_pending) from [<8000e7c0>] (work_pending+0xc/0x20)
r7:0000014f r6:7ea12b44 r5:7ea12980 r4:7ea12978
Code: bad PC value
---[ end trace 458bee342241e359 ]---
Kernel panic - not syncing: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Fatal exception in interrupt
--
Ken ar c'henta? | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
next reply other threads:[~2014-07-06 6:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-06 6:08 Jean-Francois Moine [this message]
2014-07-08 15:17 ` dove (marvell A510) crash on boot with config_preempt Jason Cooper
2014-07-10 12:33 ` Sebastian Hesselbarth
2014-07-10 20:55 ` Sebastian Hesselbarth
2014-07-10 22:13 ` Russell King - ARM Linux
2014-07-10 22:08 ` Russell King - ARM Linux
2014-07-11 9:10 ` [PATCH] ARM: Fix preemption disable in iwmmxt_task_enable() Sebastian Hesselbarth
2014-07-11 9:10 ` Sebastian Hesselbarth
2014-07-11 17:09 ` Catalin Marinas
2014-07-11 17:09 ` Catalin Marinas
2014-07-12 11:05 ` [PATCH v2] " Sebastian Hesselbarth
2014-07-12 11:05 ` Sebastian Hesselbarth
2014-07-14 12:08 ` Catalin Marinas
2014-07-14 12:08 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140706080845.723e9787@armhf \
--to=moinejf@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.