From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH V2] ARM: dts: OMAP5: Add device nodes for ABB Date: Mon, 7 Jul 2014 04:32:21 -0700 Message-ID: <20140707113220.GQ28884@atomide.com> References: <1402017072-12599-1-git-send-email-nm@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-02-ewr.mailhop.org ([204.13.248.72]:21976 "EHLO mho-02-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751409AbaGGLcU (ORCPT ); Mon, 7 Jul 2014 07:32:20 -0400 Content-Disposition: inline In-Reply-To: <1402017072-12599-1-git-send-email-nm@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Nishanth Menon Cc: =?utf-8?Q?Beno=C3=AEt?= Cousson , linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org * Nishanth Menon [140605 18:12]: > From: "Andrii.Tseglytskyi" > > Add ABB device nodes for OMAP5 family of devices. Data is based on > final production OMAP543x Technical Reference Manual revision Z (April 2013). > Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014). > > [nm@ti.com: co-developer and updates to latest documentation] > Signed-off-by: Nishanth Menon > Signed-off-by: Andrii.Tseglytskyi > --- > Original patch (v1): https://patchwork.kernel.org/patch/3555191/ > > Rest of the series was accepted, however, I had to drop this > previously to ensure that the data we introduce is compatible with > production samples and existing pre-production samples on various > OMAP5uEVMs already in circulation. Is this OK to queue for v3.17 or do we need it for the -rc cycle? Regards, Tony > arch/arm/boot/dts/omap5.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index a4ed549..8eee6fb 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -985,6 +985,66 @@ > dma-names = "audio_tx"; > }; > }; > + > + abb_mpu: regulator-abb-mpu { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mpu"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, > + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80>; > + /* LDOVBBMPU_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMPU_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 1060000 0 0x0 0 0x02000000 0x01F00000 > + 1250000 0 0x4 0 0x02000000 0x01F00000 > + >; > + }; > + > + abb_mm: regulator-abb-mm { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mm"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, > + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80000000>; > + /* LDOVBBMM_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMM_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 1025000 0 0x0 0 0x02000000 0x01F00000 > + 1120000 0 0x4 0 0x02000000 0x01F00000 > + >; > + }; > }; > }; > > -- > 1.7.9.5 > From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Mon, 7 Jul 2014 04:32:21 -0700 Subject: [PATCH V2] ARM: dts: OMAP5: Add device nodes for ABB In-Reply-To: <1402017072-12599-1-git-send-email-nm@ti.com> References: <1402017072-12599-1-git-send-email-nm@ti.com> Message-ID: <20140707113220.GQ28884@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Nishanth Menon [140605 18:12]: > From: "Andrii.Tseglytskyi" > > Add ABB device nodes for OMAP5 family of devices. Data is based on > final production OMAP543x Technical Reference Manual revision Z (April 2013). > Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014). > > [nm at ti.com: co-developer and updates to latest documentation] > Signed-off-by: Nishanth Menon > Signed-off-by: Andrii.Tseglytskyi > --- > Original patch (v1): https://patchwork.kernel.org/patch/3555191/ > > Rest of the series was accepted, however, I had to drop this > previously to ensure that the data we introduce is compatible with > production samples and existing pre-production samples on various > OMAP5uEVMs already in circulation. Is this OK to queue for v3.17 or do we need it for the -rc cycle? Regards, Tony > arch/arm/boot/dts/omap5.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index a4ed549..8eee6fb 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -985,6 +985,66 @@ > dma-names = "audio_tx"; > }; > }; > + > + abb_mpu: regulator-abb-mpu { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mpu"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, > + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80>; > + /* LDOVBBMPU_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMPU_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 1060000 0 0x0 0 0x02000000 0x01F00000 > + 1250000 0 0x4 0 0x02000000 0x01F00000 > + >; > + }; > + > + abb_mm: regulator-abb-mm { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mm"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, > + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80000000>; > + /* LDOVBBMM_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMM_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 1025000 0 0x0 0 0x02000000 0x01F00000 > + 1120000 0 0x4 0 0x02000000 0x01F00000 > + >; > + }; > }; > }; > > -- > 1.7.9.5 >