From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Snitzer Subject: Re: v3.15 dm-mpath regression: cable pull test causes I/O hang Date: Tue, 8 Jul 2014 12:33:23 -0400 Message-ID: <20140708163323.GB23439@redhat.com> References: <53AD6B62.2020407@acm.org> <20140627133345.GA6150@redhat.com> <20140702220223.GA23894@redhat.com> <53B56120.8040802@acm.org> <20140703140516.GB28104@redhat.com> <53B569E1.1010405@acm.org> <11AF7C027C4C02408624617A4986078401311EA8@BPXM12GP.gisp.nec.co.jp> <53BAA35B.30204@acm.org> <11AF7C027C4C02408624617A498607840132038A@BPXM12GP.gisp.nec.co.jp> Reply-To: device-mapper development Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <11AF7C027C4C02408624617A498607840132038A@BPXM12GP.gisp.nec.co.jp> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dm-devel-bounces@redhat.com Errors-To: dm-devel-bounces@redhat.com To: Junichi Nomura Cc: device-mapper development , Bart Van Assche List-Id: dm-devel.ids On Mon, Jul 07 2014 at 8:55pm -0400, Junichi Nomura wrote: > On 07/07/14 22:40, Bart Van Assche wrote: > > Thanks for looking into this issue. I have attached the requested > > information to this e-mail for a test run with kernel 3.16-rc4 at the > > initiator side. > > Thank you, Bart. The information is helpful. > > >From "dmsetup table" output, hardware handler is not used > in your setup. So pg_init is not involved. > > > # cat /proc/diskstats > .. > > 253 1 dm-1 127 0 1016 1070 0 0 0 0 1 278360 278820 > > In-flight IO remains. > > > # dmsetup info -c > > Name Maj Min Stat Open Targ Event UUID > ... > > 26466363537333266 253 1 L--w 1 1 0 mpath-26466363537333266 > > Typical reason of remainig IO is device staying as suspended. > But the device state is ok here. > > > # dmsetup status > ... > > 26466363537333266: 0 256000 multipath 2 1 0 0 1 1 E 0 2 2 8:48 A 0 0 1 8:160 A 0 0 1 > > Single path group with both paths being active on dm-1. > But the path group is not active. > > I suspect what's happening here is nobody clears m->queue_io: > multipath_busy() returns busy when queue_io=1 while clearing queue_io > needs __choose_pgpath(), which won't be called if multipath_busy() is true. > > I think if you run 'sg_inq /dev/dm-1' for example in this case, > the device will start working again. > Since ioctl is not affected by multipath_busy(), somehow the problem > was hidden in many cases by udev activities, for example. > > Attached patch should fix the problem. > Could you give it a try? > > - > Jun'ichi Nomura, NEC Corporation > > > pg_ready() checks the current state of the multipath and may return > false even if a new IO is needed to change the state. > > OTOH, if multipath_busy() returns busy, a new IO will not be sent > to multipath target and the state change won't happen. That results > in lock up. > > The intent of multipath_busy() is to avoid unnecessary cycles of > dequeue + request_fn + requeue if it is known that multipath device > will requeue. > > Such situation would be: > - path group is being activated > - there is no path and the multipath is setup to requeue if no path > > This patch should fix the problem introduced as a part of this commit: > commit e809917735ebf1b9a56c24e877ce0d320baee2ec > dm mpath: push back requests instead of queueing Thanks Jun'ichi! I knew multipath_busy() wasn't quite right ;) I've merged your fix with a revised header, if you see anything wrong with the header please feel free to let me know! See: https://git.kernel.org/cgit/linux/kernel/git/device-mapper/linux-dm.git/commit/?h=for-next&id=75c76c45b76e53b7c2f025d30e7e308bfe331004 This will likely go to Linus for 3.16-rc5 by this Friday. BTW, I also staged a related cleanup for 3.17, see: https://git.kernel.org/cgit/linux/kernel/git/device-mapper/linux-dm.git/commit/?h=for-next&id=2122e57c913cd842e5061137a7093bd06e728677 Thanks again, Mike