From: Denys Dmytriyenko <denys@ti.com>
To: "Cooper Jr., Franklin" <fcooper@ti.com>
Cc: "meta-arago@arago-project.org" <meta-arago@arago-project.org>
Subject: Re: [PATCH 1/5 v2] wpa-supplicant-wl18xx: Update recipe to ol_r8.a9.14 version.
Date: Wed, 16 Jul 2014 10:13:26 -0400 [thread overview]
Message-ID: <20140716141326.GK15788@edge> (raw)
In-Reply-To: <8F29D6B095ED194EA1980491A5E029710C6E344E@DFLE08.ent.ti.com>
On Wed, Jul 16, 2014 at 02:08:03PM +0000, Cooper Jr., Franklin wrote:
>
>
> > -----Original Message-----
> > From: meta-arago-bounces@arago-project.org [mailto:meta-arago-
> > bounces@arago-project.org] On Behalf Of Machani, Yaniv
> > Sent: Wednesday, July 16, 2014 5:28 AM
> > To: meta-arago@arago-project.org
> > Subject: [meta-arago] [PATCH 1/5 v2] wpa-supplicant-wl18xx: Update recipe to
> > ol_r8.a9.14 version.
> >
> > - Changed git sources to git.ti.com
> > - Adjust configuration to match latest package.
> > - Removed redundant files and cleanup.
> >
> > Signed-off-by: Yaniv Machani <yanivma@ti.com>
> > ---
> > V2 Changes
> > - Fixed mode change
> > - Fixed semantics
> >
> > ....a8.10.bb => wpa-supplicant-wl18xx_r8.a9.14.bb} | 10 +-
> > .../wpa-supplicant/wpa-supplicant.inc | 91 +++++++-------------
> > .../wpa-supplicant/wpa-supplicant/defaults-sane | 8 --
> > .../defconfig | 69 +++++++++++----
> > .../fi.epitest.hostap.WPASupplicant.service | 4 -
> > .../wpa-supplicant/fi.w1.wpa_supplicant1.service | 4 -
> > 6 files changed, 90 insertions(+), 96 deletions(-) rename meta-arago-
> > extras/recipes-connectivity/wpa-supplicant/{wpa-supplicant-
> > wl18xx_r8.a8.10.bb => wpa-supplicant-wl18xx_r8.a9.14.bb} (76%) delete
> > mode 100644 meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/defaults-sane
> > rename meta-arago-extras/recipes-connectivity/wpa-supplicant/{wpa-
> > supplicant-wl18xx => wpa-supplicant}/defconfig (90%) delete mode 100644
> > meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/fi.epitest.hostap.WPASupplicant.service
> > delete mode 100644 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant/fi.w1.wpa_supplicant1.service
> >
> > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant-wl18xx_r8.a8.10.bb b/meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant-wl18xx_r8.a9.14.bb
> > similarity index 76%
> > rename from meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant-wl18xx_r8.a8.10.bb
> > rename to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant-wl18xx_r8.a9.14.bb
> > index bfe617e..203364f 100644
> > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-
> > wl18xx_r8.a8.10.bb
> > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplica
> > +++ nt-wl18xx_r8.a9.14.bb
> > @@ -5,15 +5,15 @@ require wpa-supplicant.inc
> >
> > LICENSE = "GPLv2 | BSD"
> > LIC_FILES_CHKSUM =
> > "file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e \
> > - file://../README;md5=5cb758942d25f6f61fd4ac388fd446fa \
> > +
> > + file://../README;md5=ba46b65db36e3c82244a3815b3738d63 \
> >
> > file://wpa_supplicant.c;beginline=1;endline=17;md5=8835156c8ab8cad6356ec
> > 7f39ebe3aba"
> >
> > FILESEXTRAPATHS_append := "${THISDIR}/wpa-supplicant:"
> >
> > -# Tag: ol_r8.a8.10
> > -SRCREV = "257ab333aad993b4be81808524bc0d939c276058"
> > -BRANCH = "mbss_suspend"
> > -PR_append = "b+gitr${SRCPV}"
> > +# Tag: ol_r8.a9.14
> > +SRCREV = "281f5adb8eb7ee9e9220546c0227696b02aab332"
> > +BRANCH = "single_hostap_dfs_dynamic"
> > +PR_append = "c+gitr${SRCPV}"
> >
> > # Add ti to the PV to indicate that this is a TI modify version of wpa-
> > supplicant.
> > PV = "2.0-devel-ti"
> > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant.inc b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant.inc
> > index e0bda11..c8611ea 100644
> > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant.inc
> > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplica
> > +++ nt.inc
> > @@ -1,47 +1,47 @@
> > # This is a TI specific version of the wpa-supplicant recipe for use with the -#
> > wl12xx wlan and bluetooth module.
> > +# wl18xx wlan.
> >
> > -DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
> > +SUMMARY = "Client for Wi-Fi Protected Access (WPA)"
> > HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
> > BUGTRACKER = "http://hostap.epitest.fi/bugz/"
> > SECTION = "network"
> > LICENSE = "GPLv2 | BSD"
> >
> > -DEPENDS = "gnutls dbus libnl openssl
> > ${@base_contains("COMBINED_FEATURES", "madwifi", "madwifi-ng", "",d)}"
> > +DEPENDS = "gnutls dbus libnl openssl libgcrypt"
> > RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
> >
> > # To prevent users from accidently picking up this customized version of #
> > wpa-supplicant the DEFAULT_PREFERENCE will be set to -1.
> > DEFAULT_PREFERENCE = "-1"
> >
> > -PR = "r6"
> > +PR = "r7"
> >
> > -SRC_URI = "git://github.com/TI-
> > OpenLink/hostap.git;protocol=git;branch=${BRANCH} \
> > +SRC_URI =
> > +"git://git.ti.com/wilink8-wlan/hostap.git;protocol=git;branch=${BRANCH}
> > +\
> > file://defconfig \
> > - file://defaults-sane \
> > file://wpa-supplicant.sh \
> > file://wpa_supplicant.conf \
> > file://p2p_supplicant.conf \
> > - file://wpa_supplicant.conf-sane \
> > file://99_wpa_supplicant \
> > - file://wpa_supplicant.conf \
> > - file://fi.epitest.hostap.WPASupplicant.service \
> > - file://fi.w1.wpa_supplicant1.service \
> > "
> >
> > S = "${WORKDIR}/git/wpa_supplicant"
> >
> > PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
> [Franklin] PACKAGES_prepend = "${PN}-passphrase ${PN}-cli"
> > -FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
> > -FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
> > -FILES_${PN} += " /usr/share/dbus-1/system-services/*"
> > +FILES_wpa-supplicant-passphrase = "${sbindir}/wpa_passphrase"
> > +FILES_wpa-supplicant-cli = "${sbindir}/wpa_cli"
> [Franklin] You can probably just use the below
> FILES_${PN}-passphrase ....
> FILES_${PN}-cli .....
>
> > +FILES_${PN} += "${datadir}/dbus-1/system-services/*"
> >
> > -#we introduce MY_ARCH to get 'armv5te' as arch instead of the misleading
> > 'arm' on armv5te builds -MY_ARCH := "${PACKAGE_ARCH}"
> > -PACKAGE_ARCH = "${@base_contains('COMBINED_FEATURES', 'madwifi',
> > '${MACHINE_ARCH}', '${MY_ARCH}', d)}"
> > +do_configure () {
> > + install -m 0755 ${WORKDIR}/defconfig .config
> > + echo "CFLAGS +=\"-I${STAGING_INCDIR}/libnl3\"" >> .config }
> >
> > +export EXTRA_CFLAGS = "${CFLAGS}"
> > +export BINDIR = "${sbindir}"
> > do_compile () {
> > - make
> > + unset CFLAGS CPPFLAGS CXXFLAGS
> > + sed -e "s:CFLAGS\ =.*:& \$(EXTRA_CFLAGS):g" -i ${S}/src/lib.rules
> > + oe_runmake
> > }
> >
> > do_install () {
> > @@ -54,63 +54,36 @@ do_install () {
> > install -m 644 README ${WORKDIR}/wpa_supplicant.conf
> > ${D}${docdir}/wpa_supplicant
> >
> > install -d ${D}${sysconfdir}/default
> > - install -m 600 ${WORKDIR}/defaults-sane
> > ${D}${sysconfdir}/default/wpa
> > - install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane
> > ${D}${sysconfdir}/wpa_supplicant.conf
> > + install -m 600 ${WORKDIR}/wpa_supplicant.conf
> > +${D}${sysconfdir}/wpa_supplicant.conf
> > install -m 600 ${WORKDIR}/p2p_supplicant.conf
> > ${D}${sysconfdir}/p2p_supplicant.conf
> >
> > - if grep -q ^CONFIG_CTRL_IFACE_DBUS=y .config || grep -q
> > ^CONFIG_CTRL_IFACE_DBUS_NEW=y .config; then
> > - install -d ${D}/${sysconfdir}/dbus-1/system.d
> > - install -m 644 ${S}/dbus/dbus-wpa_supplicant.conf
> > ${D}/${sysconfdir}/dbus-1/system.d
> > - install -d ${D}/${datadir}/dbus-1/system-services
> > - if grep -q ^CONFIG_CTRL_IFACE_DBUS=y .config; then
> > - sed -i -e s:/sbin:${sbindir}:g
> > ${S}/dbus/fi.epitest.hostap.WPASupplicant.service
> > - install -m 644
> > ${S}/dbus/fi.epitest.hostap.WPASupplicant.service ${D}/${datadir}/dbus-
> > 1/system-services
> > - fi
> > - if grep -q ^CONFIG_CTRL_IFACE_DBUS_NEW=y .config; then
> > - sed -i -e s:/sbin:${sbindir}:g
> > ${S}/dbus/fi.w1.wpa_supplicant1.service
> > - install -m 644 ${S}/dbus/fi.w1.wpa_supplicant1.service
> > ${D}/${datadir}/dbus-1/system-services
> > - fi
> > - fi
> > -
> > install -d ${D}${sysconfdir}/network/if-pre-up.d/
> > install -d ${D}${sysconfdir}/network/if-post-down.d/
> > install -d ${D}${sysconfdir}/network/if-down.d/
> > - install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
> > install -m 755 ${WORKDIR}/wpa-supplicant.sh
> > ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant
> > cd ${D}${sysconfdir}/network/ && \
> > ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant
> >
> > + install -d ${D}/${sysconfdir}/dbus-1/system.d
> > + install -m 644 ${S}/dbus/dbus-wpa_supplicant.conf
> > ${D}/${sysconfdir}/dbus-1/system.d
> > + install -d ${D}/${datadir}/dbus-1/system-services
> > + install -m 644 ${S}/dbus/*.service
> > +${D}/${datadir}/dbus-1/system-services
> [Franklin] Any reason not to move all of the system d logic under this DISTRO_FEATURES if statement below?
> No reason to create directories and install files used by system.d if the distro doesn't support it.
I believe this code is just copied verbatim from oe-core...
> > + if ${@base_contains('DISTRO_FEATURES','systemd','true','false',d)};
> > then
> > + install -d ${D}/${systemd_unitdir}/system
> > + install -m 644 ${S}/systemd/*.service
> > ${D}/${systemd_unitdir}/system
> > + fi
> > +
> > install -d ${D}/etc/default/volatiles
> > install -m 0644 ${WORKDIR}/99_wpa_supplicant
> > ${D}/etc/default/volatiles
> > -
> > - install -d 2755 ${D}/usr/share/dbus-1/system-services
> > - install -d 2755 ${D}/etc
> > - install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}/etc
> > - install -m 644 ${WORKDIR}/fi.epitest.hostap.WPASupplicant.service
> > ${D}/usr/share/dbus-1/system-services
> > - install -m 644 ${WORKDIR}/fi.w1.wpa_supplicant1.service
> > ${D}/usr/share/dbus-1/system-services
> > }
> >
> > pkg_postinst_wpa-supplicant () {
> > - # can't do this offline
> > - if [ "x$D" != "x" ]; then
> > - exit 1
> > + # If we're offline, we don't need to do this.
> > + if [ "x$D" = "x" ]; then
> > + killall -q -HUP dbus-daemon || true
> > fi
> > +}
> >
> > - DBUSPID=`pidof dbus-daemon`
> >
> > - if [ "x$DBUSPID" != "x" ]; then
> > - /etc/init.d/dbus-1 reload
> > - fi
> > -}
> >
> > -do_configure () {
> > - install -m 0755 ${WORKDIR}/defconfig .config
> > - echo "CFLAGS += -I${STAGING_INCDIR}" >> .config
> > - echo "CFLAGS += -I${STAGING_INCDIR}/libnl3/" >> .config
> > - echo "LIBS += -L${STAGING_LIBDIR}" >> .config
> > - echo "LIBS_p += -L${STAGING_LIBDIR}" >> .config
> > - if [ "${@base_contains('COMBINED_FEATURES', 'madwifi', 1, 0, d)}" =
> > "1" ]; then
> > - echo "CONFIG_DRIVER_MADWIFI=y" >> .config
> > - echo "CFLAGS += -I${STAGING_INCDIR}/madwifi-ng" >> .config
> > - fi
> > -}
> > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/defaults-sane b/meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant/defaults-sane
> > deleted file mode 100644
> > index 67c4cbd..0000000
> > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/defaults-sane
> > +++ /dev/null
> > @@ -1,8 +0,0 @@
> > -# Useful flags:
> > -# -i <ifname> Interface (required, unless specified in config)
> > -# -D <driver> Wireless Driver
> > -# -d Debugging (-dd for more)
> > -# -q Quiet (-qq for more)
> > -
> > -CONFIG="/etc/wpa_supplicant.conf"
> > -OPTIONS="-i eth1 -D wext"
> > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant-wl18xx/defconfig b/meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant/defconfig
> > similarity index 90%
> > rename from meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant-wl18xx/defconfig
> > rename to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/defconfig
> > index f357b79..fcbe06d 100755
> > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-
> > wl18xx/defconfig
> > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplica
> > +++ nt/defconfig
> > @@ -176,7 +176,7 @@ CONFIG_EAP_PWD=y
> > CONFIG_EAP_LEAP=y
> >
> > # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y
> > +CONFIG_EAP_AKA=y
> >
> > # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
> > # This requires CONFIG_EAP_AKA to be enabled, too.
> > @@ -201,10 +201,12 @@ CONFIG_WPS=y
> > # Enable WSC 2.0 support
> > CONFIG_WPS2=y
> > # Enable WPS external registrar functionality -#CONFIG_WPS_ER=y
> > +CONFIG_WPS_ER=y
> > # Disable credentials for an open network by default when acting as a WPS #
> > registrar.
> > #CONFIG_WPS_REG_DISABLE_OPEN=y
> > +# Enable WPS support with NFC config method #CONFIG_WPS_NFC=y
> >
> > # EAP-IKEv2
> > #CONFIG_EAP_IKEV2=y
> > @@ -224,6 +226,9 @@ CONFIG_SMARTCARD=y
> > # Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
> > #CONFIG_HT_OVERRIDES=y
> >
> > +# Support VHT overrides (disable VHT, mask MCS rates, etc.)
> > +#CONFIG_VHT_OVERRIDES=y
> > +
> > # Development testing
> > #CONFIG_EAPOL_TEST=y
> >
> > @@ -231,6 +236,7 @@ CONFIG_SMARTCARD=y
> > # unix = UNIX domain sockets (default for Linux/*BSD) # udp = UDP sockets
> > using localhost (127.0.0.1) # named_pipe = Windows Named Pipe (default for
> > Windows)
> > +# udp-remote = UDP sockets with remote access (only for tests
> > +systems/purpose)
> > # y = use default (backwards compatibility) # If this option is commented
> > out, control interface is not included in the # build.
> > @@ -256,11 +262,6 @@ CONFIG_WPA_CLI_EDIT=y # 35-50 kB in code size.
> > #CONFIG_NO_WPA=y
> >
> > -# Remove WPA2 support. This allows WPA to be used, but removes WPA2
> > code to -# save about 1 kB in code size when building only WPA-Personal (no
> > EAP support) -# or 6 kB if building for WPA-Enterprise.
> > -#CONFIG_NO_WPA2=y
> > -
> > # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support # This option
> > can be used to reduce code size by removing support for # converting ASCII
> > passphrases into PSK. If this functionality is removed, the @@ -304,7 +305,6
> > @@ CONFIG_OS=unix # Select event loop implementation # eloop = select()
> > loop (default) # eloop_win = Windows events and WaitForMultipleObject()
> > loop -# eloop_none = Empty template CONFIG_ELOOP=eloop
> >
> > # Should we use poll instead of select? Select is used by default.
> > @@ -322,11 +322,9 @@ CONFIG_L2_PACKET=linux # PeerKey handshake for
> > Station to Station Link (IEEE 802.11e DLS) CONFIG_PEERKEY=y
> >
> > -# IEEE 802.11w (management frame protection) -# This version is an
> > experimental implementation based on IEEE 802.11w/D1.0 -# draft and is
> > subject to change since the standard has not yet been finalized.
> > +# IEEE 802.11w (management frame protection), also known as PMF
> > # Driver support is also needed for IEEE 802.11w.
> > -#CONFIG_IEEE80211W=y
> > +CONFIG_IEEE80211W=y
> >
> > # Select TLS implementation
> > # openssl = OpenSSL (default)
> > @@ -404,7 +402,7 @@ CONFIG_PEERKEY=y
> > #CONFIG_DYNAMIC_EAP_METHODS=y
> >
> > # IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y
> > +CONFIG_IEEE80211R=y
> >
> > # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
> > #CONFIG_DEBUG_FILE=y @@ -483,6 +481,10 @@ CONFIG_ANDROID_LOG=y #
> > IEEE 802.11n (High Throughput) support (mainly for AP mode)
> > CONFIG_IEEE80211N=y
> >
> > +# Wireless Network Management (IEEE Std 802.11v-2011) # Note: This is
> > +experimental and not complete implementation.
> > +CONFIG_WNM=y
> > +
> > # Interworking (IEEE 802.11u)
> > # This can be used to enable functionality to improve interworking with #
> > external networks (GAS/ANQP to learn more about the networks and network
> > @@ -495,12 +497,47 @@ CONFIG_HS20=y # Disable roaming in
> > wpa_supplicant #CONFIG_NO_ROAMING=y
> >
> > -# Enable P2P
> > -CONFIG_P2P=y
> > +# AP mode operations with wpa_supplicant # This can be used for
> > +controlling AP mode operations with wpa_supplicant. It # should be
> > +noted that this is mainly aimed at simple cases like # WPA2-Personal
> > +while more complex configurations like WPA2-Enterprise with an #
> > +external RADIUS server can be supported with hostapd.
> > CONFIG_AP=y
> >
> > +# P2P (Wi-Fi Direct)
> > +# This can be used to enable P2P support in wpa_supplicant. See
> > +README-P2P for # more information on P2P operations.
> > +CONFIG_P2P=y
> > +
> > +# Enable TDLS support
> > +CONFIG_TDLS=y
> > +
> > +# Wi-Fi Direct
> > +# This can be used to enable Wi-Fi Direct extensions for P2P using an
> > +external # program to control the additional information exchanges in the
> > messages.
> > +CONFIG_WIFI_DISPLAY=y
> > +
> > +# Autoscan
> > +# This can be used to enable automatic scan support in wpa_supplicant.
> > +# See wpa_supplicant.conf for more information on autoscan usage.
> > +#
> > +# Enabling directly a module will enable autoscan support.
> > +# For exponential module:
> > +#CONFIG_AUTOSCAN_EXPONENTIAL=y
> > +# For periodic module:
> > +#CONFIG_AUTOSCAN_PERIODIC=y
> > +
> > +# Password (and passphrase, etc.) backend for external storage # These
> > +optional mechanisms can be used to add support for storing passwords #
> > +and other secrets in external (to wpa_supplicant) location. This
> > +allows, for # example, operating system specific key storage to be used
> > +# # External password backend for testing purposes (developer use)
> > +#CONFIG_EXT_PASSWORD_TEST=y
> > +
> > +include $(wildcard $(LOCAL_PATH)/android_config_*.inc)
> > +
> > # bgscan
> > NEED_BGSCAN=y
> > CONFIG_BGSCAN_LEARN=y
> > CONFIG_BGSCAN_SIMPLE=y
> > -
> > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/fi.epitest.hostap.WPASupplicant.service b/meta-arago-
> > extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/fi.epitest.hostap.WPASupplicant.service
> > deleted file mode 100644
> > index fb3f917..0000000
> > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/fi.epitest.hostap.WPASupplicant.service
> > +++ /dev/null
> > @@ -1,4 +0,0 @@
> > -[D-BUS Service]
> > -Name=fi.epitest.hostap.WPASupplicant
> > -Exec=/usr/sbin/wpa_supplicant -d -Dnl80211 -c/etc/wpa_supplicant.conf -
> > iwlan0 -B -u -User=root diff --git a/meta-arago-extras/recipes-
> > connectivity/wpa-supplicant/wpa-supplicant/fi.w1.wpa_supplicant1.service
> > b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/fi.w1.wpa_supplicant1.service
> > deleted file mode 100644
> > index 0bb1056..0000000
> > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-
> > supplicant/fi.w1.wpa_supplicant1.service
> > +++ /dev/null
> > @@ -1,4 +0,0 @@
> > -[D-BUS Service]
> > -Name=fi.w1.wpa_supplicant1
> > -Exec=/usr/sbin/wpa_supplicant -d -Dnl80211 -c/etc/wpa_supplicant.conf -
> > iwlan0 -B -u -User=root
> > --
> > 1.7.9
> >
> > _______________________________________________
> > meta-arago mailing list
> > meta-arago@arago-project.org
> > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
prev parent reply other threads:[~2014-07-16 14:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-16 10:28 [PATCH 1/5 v2] wpa-supplicant-wl18xx: Update recipe to ol_r8.a9.14 version Yaniv Machani
2014-07-16 10:28 ` [PATCH 2/5 v2] hostap-daemon-wl18xx: " Yaniv Machani
2014-07-16 13:56 ` Cooper Jr., Franklin
2014-07-17 10:14 ` Machani, Yaniv
2014-07-16 10:28 ` [PATCH 3/5 v2] wl18xx : update to ol_r8.a9.14 Yaniv Machani
2014-07-16 14:09 ` Cooper Jr., Franklin
2014-07-16 10:28 ` [PATCH 5/5 v2] wl18xx-target-scripts : Add new WiFi related scripts Yaniv Machani
2014-07-16 14:09 ` Cooper Jr., Franklin
2014-07-16 14:08 ` [PATCH 1/5 v2] wpa-supplicant-wl18xx: Update recipe to ol_r8.a9.14 version Cooper Jr., Franklin
2014-07-16 14:13 ` Denys Dmytriyenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140716141326.GK15788@edge \
--to=denys@ti.com \
--cc=fcooper@ti.com \
--cc=meta-arago@arago-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.