From: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
To: Thomas Monjalon
<thomas.monjalon-pdR9zngts4EAvxtiuMwx3w@public.gmane.org>
Cc: dev-VfR2kkLFssw@public.gmane.org
Subject: [PATCH 10/10] igb_uio: fix check patch warnings
Date: Fri, 18 Jul 2014 09:14:57 -0700 [thread overview]
Message-ID: <20140718161532.274331752@networkplumber.org> (raw)
In-Reply-To: 20140718161447.020882834@networkplumber.org
[-- Attachment #1: igb_uio-checkpatch.patch --]
[-- Type: text/plain, Size: 4619 bytes --]
Fix whitespace and other problems reported by checkpatch.
This didi find a real bug in that the setup code was returning
positive value for errors which goes against convention and might have
caused a problem.
Signed-off-by: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c 2014-07-18 08:47:24.709604886 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c 2014-07-18 09:01:42.336616148 -0700
@@ -65,7 +65,7 @@ igbuio_get_uio_pci_dev(struct uio_info *
}
/* sriov sysfs */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34)
static int pci_num_vf(struct pci_dev *dev)
struct iov {
int pos;
@@ -75,7 +75,7 @@ static int pci_num_vf(struct pci_dev *de
u16 total;
u16 initial;
u16 nr_virtfn;
- } *iov = (struct iov*)dev->sriov;
+ } *iov = (struct iov *)dev->sriov;
if (!dev->is_physfn)
return 0;
@@ -204,9 +204,9 @@ store_max_read_request_size(struct devic
static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs);
#ifdef RTE_PCI_CONFIG
-static DEVICE_ATTR(extended_tag, S_IRUGO | S_IWUSR, show_extended_tag, \
+static DEVICE_ATTR(extended_tag, S_IRUGO | S_IWUSR, show_extended_tag,
store_extended_tag);
-static DEVICE_ATTR(max_read_request_size, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(max_read_request_size, S_IRUGO | S_IWUSR,
show_max_read_request_size, store_max_read_request_size);
#endif
@@ -216,7 +216,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_extended_tag.attr,
&dev_attr_max_read_request_size.attr,
#endif
- NULL,
+ NULL,
};
static const struct attribute_group dev_attr_grp = {
@@ -224,7 +224,7 @@ static const struct attribute_group dev_
};
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
/* Check if INTX works to control irq's.
* Set's INTX_DISABLE flag and reads it back
*/
@@ -378,6 +378,7 @@ static int
igbuio_dom0_mmap_phys(struct uio_info *info, struct vm_area_struct *vma)
{
int idx;
+
idx = (int)vma->vm_pgoff;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
vma->vm_page_prot.pgprot |= _PAGE_IOMAP;
@@ -400,8 +401,9 @@ igbuio_dom0_pci_mmap(struct uio_info *in
if (vma->vm_pgoff >= MAX_UIO_MAPS)
return -EINVAL;
- if(info->mem[vma->vm_pgoff].size == 0)
- return -EINVAL;
+
+ if (info->mem[vma->vm_pgoff].size == 0)
+ return -EINVAL;
idx = (int)vma->vm_pgoff;
switch (info->mem[idx].memtype) {
@@ -423,8 +425,8 @@ igbuio_pci_setup_iomem(struct pci_dev *d
unsigned long addr, len;
void *internal_addr;
- if (sizeof(info->mem) / sizeof (info->mem[0]) <= n)
- return (EINVAL);
+ if (sizeof(info->mem) / sizeof(info->mem[0]) <= n)
+ return -EINVAL;
addr = pci_resource_start(dev, pci_bar);
len = pci_resource_len(dev, pci_bar);
@@ -448,20 +450,20 @@ igbuio_pci_setup_ioport(struct pci_dev *
{
unsigned long addr, len;
- if (sizeof(info->port) / sizeof (info->port[0]) <= n)
- return (EINVAL);
+ if (sizeof(info->port) / sizeof(info->port[0]) <= n)
+ return -EINVAL;
addr = pci_resource_start(dev, pci_bar);
len = pci_resource_len(dev, pci_bar);
if (addr == 0 || len == 0)
- return (-1);
+ return -EINVAL;
info->port[n].name = name;
info->port[n].start = addr;
info->port[n].size = len;
info->port[n].porttype = UIO_PORT_X86;
- return (0);
+ return 0;
}
/* Unmap previously ioremap'd resources */
@@ -469,6 +471,7 @@ static void
igbuio_pci_release_iomem(struct uio_info *info)
{
int i;
+
for (i = 0; i < MAX_UIO_MAPS; i++) {
if (info->mem[i].internal_addr)
iounmap(info->mem[i].internal_addr);
@@ -497,14 +500,16 @@ igbuio_setup_bars(struct pci_dev *dev, s
pci_resource_start(dev, i) != 0) {
flags = pci_resource_flags(dev, i);
if (flags & IORESOURCE_MEM) {
- if ((ret = igbuio_pci_setup_iomem(dev, info,
- iom, i, bar_names[i])) != 0)
- return (ret);
+ ret = igbuio_pci_setup_iomem(dev, info, iom,
+ i, bar_names[i]);
+ if (ret != 0)
+ return ret;
iom++;
} else if (flags & IORESOURCE_IO) {
- if ((ret = igbuio_pci_setup_ioport(dev, info,
- iop, i, bar_names[i])) != 0)
- return (ret);
+ ret = igbuio_pci_setup_ioport(dev, info, iop,
+ i, bar_names[i]);
+ if (ret != 0)
+ return ret;
iop++;
}
}
@@ -513,7 +518,7 @@ igbuio_setup_bars(struct pci_dev *dev, s
return (iom != 0) ? ret : -ENOENT;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
static int __devinit
#else
static int
next prev parent reply other threads:[~2014-07-18 16:14 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 16:14 [PATCH 00/10] igb_uio related patches Stephen Hemminger
2014-07-18 16:14 ` [PATCH 01/10] igb_uio: use kernel standard log message Stephen Hemminger
2014-07-18 16:14 ` [PATCH 02/10] igb_uio: use standard uio naming Stephen Hemminger
2014-07-18 16:14 ` [PATCH 03/10] igb_uio: dont wrap pci_num_vf function needlessly Stephen Hemminger
[not found] ` <20140718161516.157268908-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-07-23 8:20 ` Thomas Monjalon
2014-07-18 16:14 ` [PATCH 04/10] igb_uio: msix cleanups Stephen Hemminger
2014-07-18 16:14 ` [PATCH 05/10] igb_uio: propogate error numbers in probe code Stephen Hemminger
2014-07-18 16:14 ` [PATCH 06/10] igb_uio: make irq mode param read-only Stephen Hemminger
2014-07-18 16:14 ` [PATCH 07/10] igb_uio: fix IRQ mode handling Stephen Hemminger
2014-07-18 16:14 ` [PATCH 08/10] igb_uio: add missing locking to config access Stephen Hemminger
2014-07-18 16:14 ` [PATCH 09/10] igb_uio: allow msi mode Stephen Hemminger
2014-07-18 16:14 ` Stephen Hemminger [this message]
[not found] ` <20140718161447.020882834-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-07-19 0:16 ` [PATCH 00/10] igb_uio related patches Thomas Monjalon
2014-07-20 8:14 ` Yerden Zhumabekov
[not found] ` <53CB7A60.8000202-8EHiFRVJVgQ@public.gmane.org>
2014-07-21 10:28 ` Thomas Monjalon
2014-07-21 12:03 ` [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls Yerden Zhumabekov
[not found] ` <1405944234-50272-1-git-send-email-e_zhumabekov-8EHiFRVJVgQ@public.gmane.org>
2014-07-21 12:03 ` [igb_uio PATCH 1/3] igb_uio: fixed typos Yerden Zhumabekov
2014-07-21 12:03 ` [igb_uio PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers Yerden Zhumabekov
[not found] ` <1405944234-50272-3-git-send-email-e_zhumabekov-8EHiFRVJVgQ@public.gmane.org>
2014-07-21 20:42 ` Stephen Hemminger
2014-07-21 20:50 ` Thomas Monjalon
2014-07-22 12:57 ` Thomas Monjalon
2014-07-21 12:03 ` [igb_uio PATCH 3/3] igb_uio: renaming pci config lock/unlock functions Yerden Zhumabekov
2014-07-21 19:51 ` [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls Thomas Monjalon
2014-07-22 13:07 ` Thomas Monjalon
2014-07-24 21:50 ` Thomas Monjalon
2014-07-25 16:51 ` Stephen Hemminger
2014-07-21 15:38 ` [PATCH " Yerden Zhumabekov
[not found] ` <1405957094-53380-1-git-send-email-e_zhumabekov-8EHiFRVJVgQ@public.gmane.org>
2014-07-21 15:38 ` [PATCH 1/3] igb_uio: fixed typos Yerden Zhumabekov
2014-07-21 15:38 ` [PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers Yerden Zhumabekov
2014-07-21 15:38 ` [PATCH 3/3] igb_uio: renaming pci config lock/unlock functions Yerden Zhumabekov
2014-07-21 19:54 ` [PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140718161532.274331752@networkplumber.org \
--to=stephen-otpzqlsittunbdjkjebofr2eb7je58tq@public.gmane.org \
--cc=dev-VfR2kkLFssw@public.gmane.org \
--cc=thomas.monjalon-pdR9zngts4EAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.