From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
To: perex@perex.cz, tiwai@suse.de, lgirdwood@gmail.com, broonie@kernel.org
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] ASoC: arizona: Disable AIF TX/RX before configuring it
Date: Tue, 22 Jul 2014 11:42:06 +0100 [thread overview]
Message-ID: <20140722104206.GA19663@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20140716121029.GA22222@opensource.wolfsonmicro.com>
Changes to the AIF configuration registers only take
effect when the AIF is disabled. If the configuration
is being changed from the previous setup, temporarily
disable the AIF.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
sound/soc/codecs/arizona.c | 87 +++++++++++++++++++++++++++++++++++---------
1 files changed, 69 insertions(+), 18 deletions(-)
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index fb30c82..bd41ee4 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -1234,6 +1234,27 @@ static int arizona_hw_params_rate(struct snd_pcm_substream *substream,
return 0;
}
+static bool arizona_aif_cfg_changed(struct snd_soc_codec *codec,
+ int base, int bclk, int lrclk, int frame)
+{
+ int val;
+
+ val = snd_soc_read(codec, base + ARIZONA_AIF_BCLK_CTRL);
+ if (bclk != (val & ARIZONA_AIF1_BCLK_FREQ_MASK))
+ return true;
+
+ val = snd_soc_read(codec, base + ARIZONA_AIF_TX_BCLK_RATE);
+ if (lrclk != (val & ARIZONA_AIF1TX_BCPF_MASK))
+ return true;
+
+ val = snd_soc_read(codec, base + ARIZONA_AIF_FRAME_CTRL_1);
+ if (frame != (val & (ARIZONA_AIF1TX_WL_MASK |
+ ARIZONA_AIF1TX_SLOT_LEN_MASK)))
+ return true;
+
+ return false;
+}
+
static int arizona_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -1249,6 +1270,8 @@ static int arizona_hw_params(struct snd_pcm_substream *substream,
int tdm_width = arizona->tdm_width[dai->id - 1];
int tdm_slots = arizona->tdm_slots[dai->id - 1];
int bclk, lrclk, wl, frame, bclk_target;
+ bool reconfig;
+ unsigned int aif_tx_state, aif_rx_state;
if (params_rate(params) % 8000)
rates = &arizona_44k1_bclk_rates[0];
@@ -1299,28 +1322,56 @@ static int arizona_hw_params(struct snd_pcm_substream *substream,
wl = snd_pcm_format_width(params_format(params));
frame = wl << ARIZONA_AIF1TX_WL_SHIFT | wl;
+ reconfig = arizona_aif_cfg_changed(codec, base, bclk, lrclk, frame);
+
+ if (reconfig) {
+ /* Save AIF TX/RX state */
+ aif_tx_state = snd_soc_read(codec,
+ base + ARIZONA_AIF_TX_ENABLES);
+ aif_rx_state = snd_soc_read(codec,
+ base + ARIZONA_AIF_RX_ENABLES);
+ /* Disable AIF TX/RX before reconfiguring it */
+ regmap_update_bits_async(arizona->regmap,
+ base + ARIZONA_AIF_TX_ENABLES, 0xff, 0x0);
+ regmap_update_bits(arizona->regmap,
+ base + ARIZONA_AIF_RX_ENABLES, 0xff, 0x0);
+ }
+
ret = arizona_hw_params_rate(substream, params, dai);
if (ret != 0)
- return ret;
+ goto restore_aif;
- regmap_update_bits_async(arizona->regmap,
- base + ARIZONA_AIF_BCLK_CTRL,
- ARIZONA_AIF1_BCLK_FREQ_MASK, bclk);
- regmap_update_bits_async(arizona->regmap,
- base + ARIZONA_AIF_TX_BCLK_RATE,
- ARIZONA_AIF1TX_BCPF_MASK, lrclk);
- regmap_update_bits_async(arizona->regmap,
- base + ARIZONA_AIF_RX_BCLK_RATE,
- ARIZONA_AIF1RX_BCPF_MASK, lrclk);
- regmap_update_bits_async(arizona->regmap,
- base + ARIZONA_AIF_FRAME_CTRL_1,
- ARIZONA_AIF1TX_WL_MASK |
- ARIZONA_AIF1TX_SLOT_LEN_MASK, frame);
- regmap_update_bits(arizona->regmap, base + ARIZONA_AIF_FRAME_CTRL_2,
- ARIZONA_AIF1RX_WL_MASK |
- ARIZONA_AIF1RX_SLOT_LEN_MASK, frame);
+ if (reconfig) {
+ regmap_update_bits_async(arizona->regmap,
+ base + ARIZONA_AIF_BCLK_CTRL,
+ ARIZONA_AIF1_BCLK_FREQ_MASK, bclk);
+ regmap_update_bits_async(arizona->regmap,
+ base + ARIZONA_AIF_TX_BCLK_RATE,
+ ARIZONA_AIF1TX_BCPF_MASK, lrclk);
+ regmap_update_bits_async(arizona->regmap,
+ base + ARIZONA_AIF_RX_BCLK_RATE,
+ ARIZONA_AIF1RX_BCPF_MASK, lrclk);
+ regmap_update_bits_async(arizona->regmap,
+ base + ARIZONA_AIF_FRAME_CTRL_1,
+ ARIZONA_AIF1TX_WL_MASK |
+ ARIZONA_AIF1TX_SLOT_LEN_MASK, frame);
+ regmap_update_bits(arizona->regmap,
+ base + ARIZONA_AIF_FRAME_CTRL_2,
+ ARIZONA_AIF1RX_WL_MASK |
+ ARIZONA_AIF1RX_SLOT_LEN_MASK, frame);
+ }
- return 0;
+restore_aif:
+ if (reconfig) {
+ /* Restore AIF TX/RX state */
+ regmap_update_bits_async(arizona->regmap,
+ base + ARIZONA_AIF_TX_ENABLES,
+ 0xff, aif_tx_state);
+ regmap_update_bits(arizona->regmap,
+ base + ARIZONA_AIF_RX_ENABLES,
+ 0xff, aif_rx_state);
+ }
+ return ret;
}
static const char *arizona_dai_clk_str(int clk_id)
--
1.7.2.5
next prev parent reply other threads:[~2014-07-22 10:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-16 12:10 [PATCH] ASoC: arizona: Disable AIF TX/RX before configuring it Richard Fitzgerald
2014-07-17 19:42 ` Mark Brown
2014-07-21 9:01 ` Richard Fitzgerald
2014-07-21 9:04 ` Takashi Iwai
2014-07-21 10:33 ` Richard Fitzgerald
2014-07-21 10:33 ` Richard Fitzgerald
2014-07-21 16:24 ` Mark Brown
2014-07-22 10:42 ` Richard Fitzgerald [this message]
2014-07-22 22:22 ` [PATCH v2] " Mark Brown
2014-07-22 22:22 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140722104206.GA19663@opensource.wolfsonmicro.com \
--to=rf@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.