From: Bjorn Helgaas <bhelgaas@google.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Alex Williamson <alex.williamson@redhat.com>
Subject: [GIT PULL] PCI changes for v3.17
Date: Tue, 22 Jul 2014 18:13:22 -0600 [thread overview]
Message-ID: <20140723001322.GA29769@google.com> (raw)
Hi Linus,
These are for the v3.17 merge window, not for v3.16.
I'll be on vacation until Aug 11, and I suspect the merge window will open
before then, so I'm sending this to you early. There are more things I'd
like to get into v3.17, so I hope to send another pull request soon after
I return.
The most notable pieces here are:
- Support BARs up to 128GB (up from 8GB)
- Fix SR-IOV resource assignment when we fail to expand a resource
- Rework pciehp to handle a common hardware erratum
- Cleanup MSI
- Fix NIC renaming issue
- Fix VGA default device issue on EFI systems
- Fix ASPM configuration (previously we didn't enable it as expected)
Alex Williamson has graciously agreed to take care of any major issues with
this if you take it before I return.
The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v3.17-changes
for you to fetch changes up to 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
----------------------------------------------------------------
PCI changes for the v3.17 merge window:
Resource management
- Support BAR sizes up to 128GB (Yinghai Lu)
- Keep original resource if we fail to expand it (Guo Chao)
- Return conventional error values from pci_revert_fw_address() (Bjorn Helgaas)
- Tidy resource assignment messages (Bjorn Helgaas)
- Don't exclude low BIOS area for non-PCI cards (Christoph Schulz)
PCI device hotplug
- Prevent NULL dereference during pciehp probe (Andreas Noever)
- Make pciehp pcie_wait_cmd() self-contained (Bjorn Helgaas)
- Wait for pciehp hotplug command completion lazily (Bjorn Helgaas)
- Compute pciehp timeout from hotplug command start time (Bjorn Helgaas)
- Remove pciehp assumptions about which commands cause completion events (Bjorn Helgaas)
- Clear pciehp Data Link Layer State Changed during init (Myron Stowe)
- Remove pciehp struct controller.no_cmd_complete (Rajat Jain)
- Remove cpqphp unnecessary null test (Fabian Frederick)
- Remove "invalid IRQ" warning for hot-added PCIe ports (Jiang Liu)
IOMMU
- Add DMA alias quirk for Intel 82801 bridge (Alex Williamson)
MSI
- Add internal msix_clear_and_set_ctrl() (Yijing Wang)
- Remove unused msi_enabled_mask() (Yijing Wang)
- Cache Multiple Message Capable in struct msi_desc (Yijing Wang)
- Add msi_setup_entry() to clean up initialization (Yijing Wang)
- Remove unused msi_remove_pci_irq_vectors() (Yijing Wang)
- Retrieve first MSI IRQ from msi_desc rather than pci_dev (Yijing Wang)
- Remove unused list access in __pci_restore_msix_state() (Yijing Wang)
- Use irq_get_msi_desc() to simplify code (Yijing Wang)
Generic host bridge driver
- Fix GPL v2 license string typo (Bjorn Helgaas)
Marvell MVEBU
- Fix GPL v2 license string typo (Thierry Reding)
NVIDIA Tegra
- Use correct initial HW settings (Phil Edworthy)
- Remove rcar_pcie_setup_window() resource argument (Phil Edworthy)
- Fix GPL v2 license string typo (Thierry Reding)
Renesas R-Car
- Remove redundant config accessor register checks (Sergei Shtylyov)
- Fix GPL v2 license string typo (Bjorn Helgaas)
Virtualization
- Factor secondary bus reset logic (Gavin Shan)
- Remove duplicate powerpc reset logic (Gavin Shan)
Miscellaneous
- Rework default VGA detection for EFI (Bruno Prémont)
- Fix sysfs "acpi_index" and "label" errors for NIC renaming (Simone Gotti)
- Configure ASPM at pci_enable_device()-time (Vidya Sagar)
- Add include/linux/pci_ids.h include guard (Rasmus Villemoes)
----------------------------------------------------------------
Alex Williamson (1):
PCI: Add bridge DMA alias quirk for Intel 82801 bridge
Andreas Noever (1):
PCI: Prevent NULL dereference during pciehp probe
Bjorn Helgaas (11):
PCI: pciehp: Make pcie_wait_cmd() self-contained
PCI: pciehp: Wait for hotplug command completion lazily
PCI: pciehp: Compute timeout from hotplug command start time
PCI: pciehp: Remove assumptions about which commands cause completion events
PCI: Cleanup control flow
PCI: Return conventional error values from pci_revert_fw_address()
PCI: Tidy resource assignment messages
Merge branches 'pci/host-rcar', 'pci/hotplug', 'pci/iommu', 'pci/misc' and 'pci/msi' into next
PCI: rcar: Fix GPL v2 license string typo
PCI: generic: Fix GPL v2 license string typo
Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next
Bruno Prémont (1):
x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()
Christoph Schulz (1):
x86: don't exclude low BIOS area when allocating address space for non-PCI cards
Fabian Frederick (1):
PCI: cpqphp: Remove unnecessary null test before debugfs_remove()
Gavin Shan (2):
PCI: Make resetting secondary bus logic common
powerpc/pci: Remove duplicate logic
Guo Chao (1):
PCI: Keep original resource if we fail to expand it
Jiang Liu (1):
PCI/portdrv: Remove warning about invalid IRQ for hot-added PCIe ports
Myron Stowe (1):
PCI: pciehp: Clear Data Link Layer State Changed during init
Phil Edworthy (3):
PCI: rcar: Use correct initial HW settings
PCI: rcar: Cleanup style and formatting
PCI: rcar: Remove rcar_pcie_setup_window() resource argument
Rajat Jain (1):
PCI: pciehp: Remove struct controller.no_cmd_complete
Rasmus Villemoes (1):
PCI: Add include guard to include/linux/pci_ids.h
Sergei Shtylyov (1):
PCI: rcar: Remove redundant config accessor register number checks
Simone Gotti (1):
ACPI / PCI: Fix sysfs acpi_index and label errors
Thierry Reding (2):
PCI: mvebu: Fix GPL v2 license string typo
PCI: tegra: Fix GPL v2 license string typo
Vidya Sagar (1):
PCI: Configure ASPM when enabling device
Yijing Wang (8):
PCI/MSI: Add internal msix_clear_and_set_ctrl() function
PCI/MSI: Remove unused msi_enabled_mask()
PCI/MSI: Cache Multiple Message Capable in struct msi_desc
PCI/MSI: Add msi_setup_entry() to clean up MSI initialization
PCI/MSI: Remove unused function msi_remove_pci_irq_vectors()
PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev
PCI/MSI: Remove unused list access in __pci_restore_msix_state()
PCI/MSI: Use irq_get_msi_desc() to simplify code
Yinghai Lu (1):
PCI: Support BAR sizes up to 128GB
arch/ia64/pci/fixup.c | 22 +++++
arch/powerpc/kernel/pci-common.c | 11 +--
arch/x86/include/asm/vga.h | 6 --
arch/x86/kernel/resource.c | 8 +-
arch/x86/pci/fixup.c | 21 +++++
arch/x86/pci/i386.c | 4 +
drivers/pci/host/pci-host-generic.c | 2 +-
drivers/pci/host/pci-mvebu.c | 2 +-
drivers/pci/host/pci-tegra.c | 2 +-
drivers/pci/host/pcie-rcar.c | 158 ++++++++++++++++--------------------
drivers/pci/hotplug/cpqphp_sysfs.c | 3 +-
drivers/pci/hotplug/pciehp.h | 3 +-
drivers/pci/hotplug/pciehp_core.c | 7 ++
drivers/pci/hotplug/pciehp_hpc.c | 101 ++++++++++-------------
drivers/pci/msi.c | 141 ++++++++++++++------------------
drivers/pci/pci-label.c | 18 ++--
drivers/pci/pci.c | 19 +++--
drivers/pci/pcie/portdrv_pci.c | 4 -
drivers/pci/quirks.c | 2 +
drivers/pci/setup-bus.c | 2 +-
drivers/pci/setup-res.c | 75 ++++++++---------
drivers/video/fbdev/efifb.c | 39 ---------
include/linux/msi.h | 3 +-
include/linux/pci.h | 4 +-
include/linux/pci_ids.h | 4 +
25 files changed, 313 insertions(+), 348 deletions(-)
reply other threads:[~2014-07-23 0:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140723001322.GA29769@google.com \
--to=bhelgaas@google.com \
--cc=alex.williamson@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.