From: mfuzzey@parkeon.com (Martin Fuzzey)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: i.MX53: Add Soc specific PMU setup.
Date: Tue, 29 Jul 2014 14:33:03 +0200 [thread overview]
Message-ID: <20140729123303.13347.12389.stgit@localhost> (raw)
In-Reply-To: <20140729123256.13347.79778.stgit@localhost>
On i.MX53 it is necessary to set the DBG_EN bit in the
platform GPC register to enable access to PMU counters other
than the cycle counter.
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
---
arch/arm/mach-imx/mach-imx53.c | 55 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 2bad387..b2cc235 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -19,16 +19,69 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/pmu.h>
#include "common.h"
#include "hardware.h"
#include "mx53.h"
+#include "crm-regs-imx5.h"
+
+#define GPC_DBG_EN (1 << 16)
+
+static void imx53_pmu_start(struct arm_pmu *arm_pmu)
+{
+ unsigned long flags;
+ struct pmu_hw_events *events = arm_pmu->get_hw_events();
+ u32 gpc;
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+ gpc = __raw_readl(MXC_CORTEXA8_PLAT_GPC);
+ if (gpc & GPC_DBG_EN) {
+ events->activated_flags &= ~ARM_PMU_ACTIVATED_PLATFORM;
+ } else {
+ gpc |= GPC_DBG_EN;
+ __raw_writel(gpc, MXC_CORTEXA8_PLAT_GPC);
+ events->activated_flags |= ARM_PMU_ACTIVATED_PLATFORM;
+ }
+
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void imx53_pmu_stop(struct arm_pmu *arm_pmu)
+{
+ unsigned long flags;
+ struct pmu_hw_events *events = arm_pmu->get_hw_events();
+ u32 gpc;
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+ if (events->activated_flags & ARM_PMU_ACTIVATED_PLATFORM) {
+ gpc = __raw_readl(MXC_CORTEXA8_PLAT_GPC);
+ gpc &= ~GPC_DBG_EN;
+ __raw_writel(gpc, MXC_CORTEXA8_PLAT_GPC);
+ events->activated_flags &= ~ARM_PMU_ACTIVATED_PLATFORM;
+ }
+
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static struct arm_pmu_platdata imx53_pmu_platdata = {
+ .start = imx53_pmu_start,
+ .stop = imx53_pmu_stop,
+};
+
+static struct of_dev_auxdata imx53_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,cortex-a8-pmu", 0, "arm-pmu", &imx53_pmu_platdata),
+ {}
+};
static void __init imx53_dt_init(void)
{
mxc_arch_reset_init_dt();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
}
static const char *imx53_dt_board_compat[] __initconst = {
next prev parent reply other threads:[~2014-07-29 12:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-29 12:32 [PATCH 0/4] ARM: perf: Support i.MX53 Martin Fuzzey
2014-07-29 12:32 ` [PATCH 1/4] ARM: perf: Set suniden bit Martin Fuzzey
2014-07-29 12:33 ` [PATCH 2/4] ARM: perf: Add platform specific start/stop callbacks Martin Fuzzey
2014-07-29 12:33 ` Martin Fuzzey [this message]
2014-07-29 12:33 ` [PATCH 4/4] ARM: dts: i.MX53: Add PMU DT entry Martin Fuzzey
2014-07-29 12:52 ` [PATCH 0/4] ARM: perf: Support i.MX53 Will Deacon
2014-07-29 16:40 ` Martin Fuzzey
2014-07-30 10:46 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140729123303.13347.12389.stgit@localhost \
--to=mfuzzey@parkeon.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.