[PATCH 6/9] clk: sunxi: mod1 clock support

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Thu, Jul 31, 2014 at 06:28:09PM -0300, Emilio L?pez wrote:
> The module 1 type of clocks consist of a gate and a mux and are used on
> the audio blocks to mux and gate the PLL2 outputs for AC97, IIS or
> SPDIF. This commit adds support for them on the sunxi clock driver.
> 
> Not-signed-off-by: Emilio L?pez <emilio@elopez.com.ar>

Why so?

It looks quite good.

> ---
> 
> Changes from RFC:
>  * Document compatible used
> 
>  Documentation/devicetree/bindings/clock/sunxi.txt |  1 +
>  drivers/clk/sunxi/Makefile                        |  1 +
>  drivers/clk/sunxi/clk-a10-mod1.c                  | 69 +++++++++++++++++++++++
>  3 files changed, 71 insertions(+)
>  create mode 100644 drivers/clk/sunxi/clk-a10-mod1.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index d18b89b..b028ee2 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -50,6 +50,7 @@ Required properties:
>  	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
>  	"allwinner,sun4i-a10-codec-clk" - for the codec clock on A10
>  	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
> +	"allwinner,sun4i-a10-mod1-clk" - for the module 1 family of clocks
>  	"allwinner,sun7i-a20-out-clk" - for the external output clocks
>  	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
>  	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> index a7a96f8..75d113d 100644
> --- a/drivers/clk/sunxi/Makefile
> +++ b/drivers/clk/sunxi/Makefile
> @@ -5,6 +5,7 @@
>  obj-y += clk-sunxi.o clk-factors.o
>  obj-y += clk-a10-codec.o
>  obj-y += clk-a10-hosc.o
> +obj-y += clk-a10-mod1.o
>  obj-y += clk-a10-pll2.o
>  obj-y += clk-a20-gmac.o
>  
> diff --git a/drivers/clk/sunxi/clk-a10-mod1.c b/drivers/clk/sunxi/clk-a10-mod1.c
> new file mode 100644
> index 0000000..09afd54
> --- /dev/null
> +++ b/drivers/clk/sunxi/clk-a10-mod1.c
> @@ -0,0 +1,69 @@
> +/*
> + * Copyright 2014 Emilio L?pez
> + *
> + * Emilio L?pez <emilio@elopez.com.ar>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +
> +static DEFINE_SPINLOCK(mod1_lock);
> +
> +#define SUN4I_MOD1_ENABLE	31
> +#define SUN4I_MOD1_MUX		16
> +#define SUN4I_MOD1_MUX_WIDTH	2
> +#define SUN4I_MOD1_MAX_PARENTS	4
> +
> +static void __init sun4i_mod1_clk_setup(struct device_node *node)
> +{
> +	struct clk *clk;
> +	struct clk_mux *mux;
> +	struct clk_gate *gate;
> +	const char *parents[4];
> +	const char *clk_name = node->name;
> +	void __iomem *reg;
> +	int i = 0;
> +
> +	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> +	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> +	if (!mux || !gate) {
> +		kfree(mux);
> +		kfree(gate);
> +		return;
> +	}
> +
> +	of_property_read_string(node, "clock-output-names", &clk_name);
> +	reg = of_iomap(node, 0);
> +
> +	while (i < SUN4I_MOD1_MAX_PARENTS &&
> +	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
> +		i++;
> +
> +	gate->reg = reg;
> +	gate->bit_idx = SUN4I_MOD1_ENABLE;
> +	gate->lock = &mod1_lock;
> +	mux->reg = reg;
> +	mux->shift = SUN4I_MOD1_MUX;
> +	mux->mask = BIT(SUN4I_MOD1_MUX_WIDTH) - 1;
> +	mux->lock = &mod1_lock;
> +
> +	clk = clk_register_composite(NULL, clk_name, parents, i,
> +				     &mux->hw, &clk_mux_ops,
> +				     NULL, NULL,
> +				     &gate->hw, &clk_gate_ops, 0);
> +	if (!IS_ERR(clk))
> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +}
> +CLK_OF_DECLARE(sun4i_mod1, "allwinner,sun4i-a10-mod1-clk", sun4i_mod1_clk_setup);

Why are you not using clk-sunxi for this? It has pretty much
everything in place to do so already.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140803/345affed/attachment.sig>