Re: [tegra-pinmux-scripts] [PATCH] Add support for Norrin

[Allen Martin <amartin-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

On Thu, Jul 31, 2014 at 04:17:06PM -0700, Stephen Warren wrote:
> On 07/31/2014 04:42 PM, Allen Martin wrote:
> > Add support for Tegra124 Norrin FFD reference board (PM370).  Pinmux
> > is based on PM370_T124_customer_pinmux_1.1 spreadsheet.
> 
> Oh good; I guess the Excel spreadsheet format was similar enough to 
> Jetson TK1 and Venice2 so no changes were required to 
> csv-to-board-tegra124-xlsx.py other than adding the board name. That's 
> good news:-)
> 
> Out of curiosity, have you ported U-Boot to Norrin (32) and tried the 
> auto-generated U-Boot tables that result from running 
> soc-to-uboot-driver.py on this new data file?
> 

Yes, generated both kernel dts and u-boot pinmux tables from this and
booted 3.16-rc7.  The only issue I'm seeing is the panel.  It seems to
be detected and the backlight comes on, but I have framebuffer console
turned on and I don't see any kernel spew, and I have a getty running,
but no prompt on the panel.  I haven't determined if it has anything
to do with pinmux though.


> > diff --git a/csv-to-board-tegra124-xlsx.py b/csv-to-board-tegra124-xlsx.py
> 
> > +    'norrin': 'PM370_T124_customer_pinmux_1.1.csv', # worksheet Customer_Configuration
> 
> I'd like to also get a patch (off-list) that adds 
> PM370_T124_customer_pinmux_1.1.csv to the internal version of this repo. 
> I assume you were able to git fetch my internal git tree from my dev 
> machine? If you could send me a patch to add the csv file to 
> nv-internal-data/ that would be great. I suppose we should find a better 
> server than my dev machine too!
> 
> I'll likely apply this tomorrow morning.

Ok, I'll follow up off list.

-Allen

nvpublic