Re: Beaglebone Black and libgles-omap3 : build problem

[Denys Dmytriyenko <denys@ti.com>]

Don't use beaglebone machine from meta-yocto-bsp, but instead use beaglebone 
machine from meta-ti, if you want to use other components from meta-ti...

-- 
Denys


On Thu, Aug 14, 2014 at 03:40:54PM +0200, Carlos Rafael Giani wrote:
> Hello,
> 
> I have a BeagleBone black here, and want to build a rootfs for it
> with Yocto. It shall include support for the SGX GPU.
> 
> But when I try to build this, I get:
> 
> ERROR: Nothing PROVIDES 'libgles-omap3'
> ERROR: libgles-omap3 was skipped: incompatible with machine
> beaglebone (not in COMPATIBLE_MACHINE)
> ERROR: libgles-omap3 was skipped: incompatible with machine
> beaglebone (not in COMPATIBLE_MACHINE)
> ERROR: libgles-omap3-x11 PROVIDES libgles-omap3 but was skipped:
> incompatible with machine beaglebone (not in COMPATIBLE_MACHINE)
> ERROR: libgles-omap3 was skipped: incompatible with machine
> beaglebone (not in COMPATIBLE_MACHINE)
> 
> However, this is incorrect. The BeagleBone Black has an AM3359 SoC,
> which does have the SGX, so it is compatible. Looking into the
> recipe, it lists ti33x as being compatible, yet the build breaks. I
> fixed this locally by adding "beaglebone" to the list of compatible
> machines, but of course this is a hack.
> 
> Does anybody have some insight into this? Is "beaglebone" perhaps
> the wrong machine for the BeagleBone black? I didn't find any
> machine config called "bblack" or "beagleboneblack" or similar.
> 
> cheers
> -- 
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti