From mboxrd@z Thu Jan  1 00:00:00 1970
From: Julian Wollrath <jwollrath@web.de>
Subject: Re: Grey noise with HDA Intel PCH
Date: Thu, 14 Aug 2014 17:04:59 +0200
Message-ID: <20140814170459.31428e0b@saldaea>
References: <20140814114003.7b0019f3@saldaea> <53EC8D5B.5020709@ladisch.de>
 <20140814124616.65991d7e@saldaea> <s5hoavnnu38.wl-tiwai@suse.de>
 <20140814160737.0e8fc283@saldaea> <s5h7g2bnowg.wl-tiwai@suse.de>
 <20140814163914.08e9a851@saldaea> <s5h38cznn59.wl-tiwai@suse.de>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Return-path: <alsa-devel-bounces@alsa-project.org>
Received: from mout.web.de (mout.web.de [212.227.17.11])
 by alsa0.perex.cz (Postfix) with ESMTP id 13CCE26531B
 for <alsa-devel@alsa-project.org>; Thu, 14 Aug 2014 17:05:03 +0200 (CEST)
In-Reply-To: <s5h38cznn59.wl-tiwai@suse.de>
List-Unsubscribe: <http://mailman.alsa-project.org/mailman/options/alsa-devel>,
 <mailto:alsa-devel-request@alsa-project.org?subject=unsubscribe>
List-Archive: <http://mailman.alsa-project.org/pipermail/alsa-devel/>
List-Post: <mailto:alsa-devel@alsa-project.org>
List-Help: <mailto:alsa-devel-request@alsa-project.org?subject=help>
List-Subscribe: <http://mailman.alsa-project.org/mailman/listinfo/alsa-devel>,
 <mailto:alsa-devel-request@alsa-project.org?subject=subscribe>
Errors-To: alsa-devel-bounces@alsa-project.org
Sender: alsa-devel-bounces@alsa-project.org
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, Clemens Ladisch <clemens@ladisch.de>
List-Id: alsa-devel@alsa-project.org

Am Thu, 14 Aug 2014 16:47:46 +0200
schrieb Takashi Iwai <tiwai@suse.de>:

> At Thu, 14 Aug 2014 16:39:14 +0200,
> Julian Wollrath wrote:
> > 
> > Am Thu, 14 Aug 2014 16:09:51 +0200
> > schrieb Takashi Iwai <tiwai@suse.de>:
> > 
> > > At Thu, 14 Aug 2014 16:07:37 +0200,
> > > Julian Wollrath wrote:
> > > > 
> > > > > > > > Simple mixer control 'Mic',0
> > > > > > > >   Front Left: Playback 0 [0%] [-34.50dB] [on]
> > > > > > > >   Front Right: Playback 0 [0%] [-34.50dB] [on]
> > > > > > > 
> > > > > > > This plays any noise from the mic input.
> > > > > > Turning it off makes no difference since capture is turned
> > > > > > off anyway:
> > > > > 
> > > > > This is a loopback mixer element, it has nothing to do with
> > > > > capture stream.
> > > > > 
> > > > > The likely culprit of the static noises is the signal from the
> > > > > analog loopback.  In some cases, you can disable the whole
> > > > > loopback via "Loopback Mixing" mixer element on the fly.  In
> > > > > some cases, you'd need to disable each mixer input (e.g. "Mic
> > > > > Playback Switch"). In some cases (e.g. on some Sony and Dell
> > > > > laptops), you'd need to disable the complete analog loopback
> > > > > at the initialization.
> > > > > 
> > > > > The last one can be done via the early patching or sysfs
> > > > > reconfiguration, pass "mixer_nid = 0" hint.  See HD-Audio.txt
> > > > > for a brief instruction.
> > > > Sadly, that did not help.
> > > 
> > > Give alsa-info.sh output after your change to verify whether you
> > > did correctly.
> > Here it is, cheers:
> 
> Thanks.  The setup looks OK, the path is:
>   DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
> and the mixer mutes the loopback path (index 1).
> 
> Is it the state where you still hear the static noise?
Yes, the alsa-info.sh script was executed, while hearing the static
noise.

> Also, what if you use the module option for snd-hda-intel
> model=nofixup or model=generic?
That did not change anything either. Passing the "mixer_nid = 0" hint
also did not get rid of the static noise, when loading snd-hda-intel
with model=nofixup resp. model=generic.

Cheers,
Julian