From: "Benoît Canet" <benoit.canet@nodalink.com>
To: Max Reitz <mreitz@redhat.com>
Cc: "Kevin Wolf" <kwolf@redhat.com>,
qemu-devel@nongnu.org, "Stefan Hajnoczi" <stefanha@redhat.com>,
"Benoît Canet" <benoit.canet@nodalink.com>
Subject: Re: [Qemu-devel] [PATCH v3 05/10] qcow2: Fix refcount blocks beyond image end
Date: Fri, 22 Aug 2014 18:20:29 +0000 [thread overview]
Message-ID: <20140822182029.GF9526@nodalink.com> (raw)
In-Reply-To: <1408725104-17176-6-git-send-email-mreitz@redhat.com>
On Fri, Aug 22, 2014 at 06:31:39PM +0200, Max Reitz wrote:
> If the qcow2 check function detects a refcount block located beyond the
> image end, grow the image appropriately. This cannot break anything and
> is the logical fix for such a case.
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> ---
> block/qcow2-refcount.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 46 insertions(+), 4 deletions(-)
>
> diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
> index babe6cb..1f0f44e 100644
> --- a/block/qcow2-refcount.c
> +++ b/block/qcow2-refcount.c
> @@ -1505,7 +1505,8 @@ static int check_refblocks(BlockDriverState *bs, BdrvCheckResult *res,
> int64_t *nb_clusters)
> {
> BDRVQcowState *s = bs->opaque;
> - int64_t i;
> + int64_t i, size;
> + int ret;
>
> for(i = 0; i < s->refcount_table_size; i++) {
> uint64_t offset, cluster;
> @@ -1521,9 +1522,50 @@ static int check_refblocks(BlockDriverState *bs, BdrvCheckResult *res,
> }
>
> if (cluster >= *nb_clusters) {
> - fprintf(stderr, "ERROR refcount block %" PRId64
> - " is outside image\n", i);
> - res->corruptions++;
> + fprintf(stderr, "%s refcount block %" PRId64 " is outside image\n",
> + fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR", i);
> +
> + if (fix & BDRV_FIX_ERRORS) {
> + int64_t old_nb_clusters = *nb_clusters;
> +
> + ret = bdrv_truncate(bs->file, offset + s->cluster_size);
> + if (ret < 0) {
> + goto resize_fail;
> + }
> + size = bdrv_getlength(bs->file);
> + if (size < 0) {
> + ret = size;
> + goto resize_fail;
> + }
> +
> + *nb_clusters = size_to_clusters(s, size);
> + assert(*nb_clusters >= old_nb_clusters);
> +
> + *refcount_table = g_try_realloc(*refcount_table,
> + *nb_clusters * sizeof(uint16_t));
> + if (!*refcount_table) {
> + res->check_errors++;
> + return -ENOMEM;
> + }
> +
> + memset(*refcount_table + old_nb_clusters, 0,
> + (*nb_clusters - old_nb_clusters) * sizeof(uint16_t));
> +
> + if (cluster >= *nb_clusters) {
> + ret = -EINVAL;
> + goto resize_fail;
> + }
> +
> + res->corruptions_fixed++;
> + continue;
> +
> +resize_fail:
> + res->corruptions++;
> + fprintf(stderr, "ERROR could not resize image: %s\n",
> + strerror(-ret));
> + } else {
> + res->corruptions++;
> + }
> continue;
> }
>
> --
> 2.0.4
>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
next prev parent reply other threads:[~2014-08-22 18:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-22 16:31 [Qemu-devel] [PATCH v3 00/10] qcow2: Fix image repairing Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 01/10] qcow2: Fix leaks in dirty images Max Reitz
2014-08-22 18:44 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 02/10] qcow2: Split qcow2_check_refcounts() Max Reitz
2014-08-22 18:03 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 03/10] qcow2: Pull check_refblocks() up Max Reitz
2014-08-22 18:04 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 04/10] qcow2: Reuse refcount table in calculate_refcounts() Max Reitz
2014-08-22 18:07 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 05/10] qcow2: Fix refcount blocks beyond image end Max Reitz
2014-08-22 18:20 ` Benoît Canet [this message]
2014-08-26 13:07 ` Eric Blake
2014-08-26 18:06 ` Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 06/10] qcow2: Do not perform potentially damaging repairs Max Reitz
2014-08-22 18:25 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 07/10] qcow2: Rebuild refcount structure during check Max Reitz
2014-08-25 17:40 ` Benoît Canet
2014-08-27 18:37 ` Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 08/10] qcow2: Clean up after refcount rebuild Max Reitz
2014-08-22 18:43 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 09/10] iotests: Fix test outputs Max Reitz
2014-08-26 13:09 ` Eric Blake
2014-08-26 18:03 ` Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 10/10] iotests: Add test for potentially damaging repairs Max Reitz
2014-08-22 18:50 ` Benoît Canet
2014-08-22 19:55 ` Eric Blake
2014-08-22 20:55 ` Benoît Canet
2014-08-26 17:53 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140822182029.GF9526@nodalink.com \
--to=benoit.canet@nodalink.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.