All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: xfs@oss.sgi.com
Subject: Re: [PATCH] xfs: trim eofblocks before collapse range
Date: Mon, 25 Aug 2014 13:40:20 -0400	[thread overview]
Message-ID: <20140825174020.GA17813@bfoster.bfoster> (raw)
In-Reply-To: <1408988250-17772-1-git-send-email-bfoster@redhat.com>

On Mon, Aug 25, 2014 at 01:37:30PM -0400, Brian Foster wrote:
> xfs_collapse_file_space() currently writes back the entire file
> undergoing collapse range to settle things down for the extent shift
> algorithm. While this prevents changes to the extent list during the
> collapse operation, the writeback itself is not enough to prevent
> unnecessary collapse failures.
> 
> The current shift algorithm uses the extent index to iterate the in-core
> extent list. If a post-eof delalloc extent persists after the writeback
> (e.g., a prior zero range op where the end of the range aligns with eof
> can separate the post-eof blocks such that they are not written back and
> converted), xfs_bmap_shift_extents() becomes confused over the encoded
> br_startblock value and fails the collapse.
> 
> As with the full writeback, this is a temporary fix until the algorithm
> is improved to cope with a volatile extent list and avoid attempts to
> shift post-eof extents.
> 
> Signed-off-by: Brian Foster <bfoster@redhat.com>
> ---
> 
> Hi all,
> 
> This addresses the other fsx failure I've observed related to collapse
> range. It should also be addressed by reworking the algorithm as
> discussed in Dave's full file writeback patch. This patch applies on top
> of that and I think this is more suitable for a near-term -rc drop.
> 
> Brian
> 

Also, appended is a quick reproducer for the fsx sequence that leads to
the failure.

Brian

---8<---

#!/bin/sh

FILE=$1

rm -f $FILE
touch $FILE

# create preallocation
xfs_io -c "pwrite 0 32k" $FILE
xfs_io -c "pwrite 32k 32k" $FILE
xfs_io -c "pwrite 64k 32k" $FILE

# 160k, dangling post-eof extent
xfs_io -c "pwrite 96k 64k" $FILE
xfs_io -c "zero 156k 4k" $FILE

# create more extents
xfs_io -c fsync $FILE
for i in $(seq 0 8192 151152)
do
	xfs_io -c "fpunch $i 4k" $FILE
done

# boom!
xfs_io -c "fcollapse 0 4k" $FILE

---

>  fs/xfs/xfs_bmap_util.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
> index 76b6a29..1707980 100644
> --- a/fs/xfs/xfs_bmap_util.c
> +++ b/fs/xfs/xfs_bmap_util.c
> @@ -1471,8 +1471,10 @@ xfs_collapse_file_space(
>  	shift_fsb = XFS_B_TO_FSB(mp, len);
>  
>  	/*
> -	 * writeback the entire file to prevent concurrent writeback of ranges
> -	 * outside the collapsing region from changing the extent list.
> +	 * Writeback the entire file and force remove any post-eof blocks. The
> +	 * writeback prevents changes to the extent list via concurrent
> +	 * writeback and the eofblocks trim prevents the extent shift algorithm
> +	 * from running into a post-eof delalloc extent.
>  	 *
>  	 * XXX: This is a temporary fix until the extent shift loop below is
>  	 * converted to use offsets and lookups within the ILOCK rather than
> @@ -1482,6 +1484,11 @@ xfs_collapse_file_space(
>  	error = filemap_write_and_wait(VFS_I(ip)->i_mapping);
>  	if (error)
>  		return error;
> +	if (xfs_can_free_eofblocks(ip, true)) {
> +		error = xfs_free_eofblocks(mp, ip, false);
> +		if (error)
> +			return error;
> +	}
>  
>  	error = xfs_free_file_space(ip, offset, len);
>  	if (error)
> -- 
> 1.8.3.1
> 
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2014-08-25 17:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-25 17:37 [PATCH] xfs: trim eofblocks before collapse range Brian Foster
2014-08-25 17:40 ` Brian Foster [this message]
2014-08-25 22:34 ` Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140825174020.GA17813@bfoster.bfoster \
    --to=bfoster@redhat.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.