From: "lianjf@ava.com.cn" <lianjf@ava.com.cn>
To: meta-freescale <meta-freescale@yoctoproject.org>
Subject: consultion about uboot and kernel
Date: Tue, 26 Aug 2014 17:09:23 +0800 [thread overview]
Message-ID: <2014082617092334337931@ava.com.cn> (raw)
[-- Attachment #1: Type: text/plain, Size: 3380 bytes --]
Hi,
Anyone can tell me why the u-boot is not able to boot the freescale imx6q kernel,and stuck in the starting the kernel,the message is:
-------------------------------------------------------------------------------------------------------------------------------------
U-Boot 2009.08 (Aug 16 2013 - 12:04:20)
CPU: Freescale i.MX6 family TO1.2 at 792 MHz
Thermal sensor with ratio = 189
Temperature: 40 C, calibration data 0x5a95097d
mx6q pll1: 792MHz
mx6q pll2: 528MHz
mx6q pll3: 480MHz
mx6q pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 264000000Hz
emi_slow clock: 132000000Hz
ddr clock : 528000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
nfc clock : 24000000Hz
Board: i.MX6Q-SABRESD: unknown-board Board: 0x63012 [WDOG ]
Boot Device: MMC
I2C: ready
DRAM: 1 GB
MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3
In: serial
Out: serial
Err: serial
Found PFUZE100! deviceid=10,revid=11
Net: got MAC address from IIM: 00:04:9f:02:b1:af
FEC0 [PRIME]
Hit any key to stop autoboot: 0
PHY indentify @ 0x1 = 0x004dd074
FEC: Link is Up 796d
Using FEC0 device
TFTP from server 192.168.2.109; our IP address is 192.168.2.106
Filename 'uImage'.
Load address: 0x10800000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######
done
Bytes transferred = 5352304 (51ab70 hex)
## Booting kernel from Legacy Image at 10800000 ...
Image Name: Linux-3.10.17-1.0.0_ga+g232293e
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5352240 Bytes = 5.1 MB
Load Address: 10008000
Entry Point: 10008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
But it can boot the kernel version linux-3.0.35-imx_4.1.0.
Best Regards
------------------
Lian jianfei
5F, No.15, Ke Hui 2nd Street, Ke Hui Development Centre Science Avenue, Science City, Luo Gang District Guangzhou, China 510663
TEL: 15989094327
Email: lianjf@ava.com.cn
[-- Attachment #2: Type: text/html, Size: 5619 bytes --]
next reply other threads:[~2014-08-26 9:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 9:09 lianjf [this message]
2014-08-26 9:16 ` consultion about uboot and kernel Marco Trillo
2014-08-26 9:30 ` Maciej Borzecki
2014-08-26 9:31 ` Eric Bénard
2014-08-26 9:56 ` lianjf
2014-08-26 10:04 ` Eric Bénard
2014-08-26 10:08 ` lianjf
2014-08-26 10:36 ` Eric Bénard
2014-08-26 10:11 ` Maciej Borzecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2014082617092334337931@ava.com.cn \
--to=lianjf@ava.com.cn \
--cc=meta-freescale@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.