All of lore.kernel.org
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 04/05] ARM: shmobile: armadillo800eva reference: Remove C board code
Date: Thu, 28 Aug 2014 03:35:18 +0000	[thread overview]
Message-ID: <20140828033518.18867.19496.sendpatchset@w520> (raw)

From: Magnus Damm <damm+renesas@opensource.se>

Now when the r8a7740 generic multiplatform case has the same
features as the DT reference board code then get rid of the
Armadillo800EVA DT reference C board code. DT Reference code
in the future shall make use of the r8a7740 Multiplatform 
support code with the generic SoC machine vector.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 arch/arm/mach-shmobile/Kconfig                           |   15 -
 arch/arm/mach-shmobile/Makefile                          |    1 
 arch/arm/mach-shmobile/Makefile.boot                     |    1 
 arch/arm/mach-shmobile/board-armadillo800eva-reference.c |  199 --------------
 4 files changed, 216 deletions(-)

--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig	2014-08-28 11:47:11.000000000 +0900
@@ -187,21 +187,6 @@ config MACH_ARMADILLO800EVA
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 
-config MACH_ARMADILLO800EVA_REFERENCE
-	bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SH_ETH
-	select SND_SOC_WM8978 if SND_SIMPLE_CARD
-	select USE_OF
-	---help---
-	   Use reference implementation of Armadillo800 EVA board support
-	   which makes greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 config MACH_BOCKW
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2014-08-28 11:47:11.000000000 +0900
@@ -68,7 +68,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= bo
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
--- 0001/arch/arm/mach-shmobile/Makefile.boot
+++ work/arch/arm/mach-shmobile/Makefile.boot	2014-08-28 12:08:36.000000000 +0900
@@ -3,7 +3,6 @@ loadaddr-y	: loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
 loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
--- 0001/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ /dev/null	2013-06-03 21:41:10.638032047 +0900
@@ -1,199 +0,0 @@
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- * CON1		Camera Module
- * CON2		Extension Bus
- * CON3		HDMI Output
- * CON4		Composite Video Output
- * CON5		H-UDI JTAG
- * CON6		ARM JTAG
- * CON7		SD1
- * CON8		SD2
- * CON9		RTC BackUp
- * CON10	Monaural Mic Input
- * CON11	Stereo Headphone Output
- * CON12	Audio Line Output(L)
- * CON13	Audio Line Output(R)
- * CON14	AWL13 Module
- * CON15	Extension
- * CON16	LCD1
- * CON17	LCD2
- * CON19	Power Input
- * CON20	USB1
- * CON21	USB2
- * CON22	Serial
- * CON23	LAN
- * CON24	USB3
- * LED1		Camera LED (Yellow)
- * LED2		Power LED (Green)
- * LED3-LED6	User LED (Yellow)
- * LED7		LAN link LED (Green)
- * LED8		LAN activity LED (Yellow)
- */
-
-/*
- * DipSwitch
- *
- *                    SW1
- *
- * -12345678-+---------------+----------------------------
- *  1        | boot          | hermit
- *  0        | boot          | OS auto boot
- * -12345678-+---------------+----------------------------
- *   00      | boot device   | eMMC
- *   10      | boot device   | SDHI0 (CON7)
- *   01      | boot device   | -
- *   11      | boot device   | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- *     0     | Extension Bus | D8-D15 disable, eMMC enable
- *     1     | Extension Bus | D8-D15 enable,  eMMC disable
- * -12345678-+---------------+----------------------------
- *      0    | SDHI1         | COM8 disable, COM14 enable
- *      1    | SDHI1         | COM8 enable,  COM14 disable
- * -12345678-+---------------+----------------------------
- *       0   | USB0          | COM20 enable,  COM24 disable
- *       1   | USB0          | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- *        00 | JTAG          | SH-X2
- *        10 | JTAG          | ARM
- *        01 | JTAG          | -
- *        11 | JTAG          | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- *	usbhsf_power_ctrl()
- */
-
-static void __init eva_clock_init(void)
-{
-	struct clk *system	= clk_get(NULL, "system_clk");
-	struct clk *xtal1	= clk_get(NULL, "extal1");
-	struct clk *usb24s	= clk_get(NULL, "usb24s");
-	struct clk *fsibck	= clk_get(NULL, "fsibck");
-
-	if (IS_ERR(system)	||
-	    IS_ERR(xtal1)	||
-	    IS_ERR(usb24s)	||
-	    IS_ERR(fsibck)) {
-		pr_err("armadillo800eva board clock init failed\n");
-		goto clock_error;
-	}
-
-	/* armadillo 800 eva extal1 is 24MHz */
-	clk_set_rate(xtal1, 24000000);
-
-	/* usb24s use extal1 (= system) clock (= 24MHz) */
-	clk_set_parent(usb24s, system);
-
-	/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
-	clk_set_rate(fsibck, 12288000);
-
-clock_error:
-	if (!IS_ERR(system))
-		clk_put(system);
-	if (!IS_ERR(xtal1))
-		clk_put(xtal1);
-	if (!IS_ERR(usb24s))
-		clk_put(usb24s);
-	if (!IS_ERR(fsibck))
-		clk_put(fsibck);
-}
-
-/*
- * board init
- */
-static void __init eva_init(void)
-{
-	r8a7740_clock_init(MD_CK0 | MD_CK2);
-	eva_clock_init();
-
-	r8a7740_meram_workaround();
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	r8a7740_pm_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel(1 << 31, RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
-	"renesas,armadillo800eva-reference",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
-	.map_io		= r8a7740_map_io,
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7740_init_irq_of,
-	.init_machine	= eva_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= eva_boards_compat_dt,
-	.restart	= eva_restart,
-MACHINE_END

             reply	other threads:[~2014-08-28  3:35 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-28  3:35 Magnus Damm [this message]
2014-09-04  2:36 ` [PATCH 04/05] ARM: shmobile: armadillo800eva reference: Remove C board code Magnus Damm
2014-09-04  4:00 ` Simon Horman
2014-09-04  4:18 ` Magnus Damm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140828033518.18867.19496.sendpatchset@w520 \
    --to=magnus.damm@gmail.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.