From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot,PULL] Please pull u-boot-imx
Date: Fri, 29 Aug 2014 13:48:28 -0400 [thread overview]
Message-ID: <20140829174828.GS19374@bill-the-cat> (raw)
In-Reply-To: <53F4AD0E.2040100@denx.de>
On Wed, Aug 20, 2014 at 04:13:34PM +0200, Stefano Babic wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 1899fac925eda817e12234aef3d01d354788662e:
>
> Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
> (2014-08-09 16:48:34 +0200)
>
> are available in the git repository at:
>
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to d145878d59c80a44d8c6e6d606b898ab87d205ee:
>
> mx6sxsabresd: Add Ethernet support (2014-08-20 13:15:23 +0200)
>
> ----------------------------------------------------------------
> Fabio Estevam (18):
> mx6: Add support for the mx6solox variant
> mx6sx: Add pin definitions
> mx6: clock: Do not enable sata and ipu clocks
> mx6sx: Add initial support for mx6sxsabresd board
> mx6: soc: Do not apply the PFD erratum for mx6solox
> mx6sxsabresd: Add PFUZE100 PMIC support
> mx6: Remove duplication of iomuxc structure
> mx6: Adjust the GPR offset for mx6solox
> mx6: imx-regs: Remove unused 'omux' field from iomux struct
> mx6: crm_regs: Fix CDCDR_SPDIF0_CLK_PODF mask and offset
> mx6: crm_regs: Fix MXC_CCM_CLPCR_WB_PER_AT_LPM definition
> mx6: crm_regs: Fix MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED
> pmic: pmic_pfuze100: Use a shorter name for PMIC name
> mx31pdk: Change maintainer
> mx6sxsabresd: Update DDR initialization
> mx6sxsabresd: Convert to the new Kconfig style
> mx6sx: Adjust enable_fec_anatop_clock() for mx6solox
> mx6sxsabresd: Add Ethernet support
>
> Gabriel Huau (1):
> mx6: add support of multi-processor command
>
> Heiko Schocher (6):
> imx6: add gpr2 usb_otg_id iomux select control define
> i.MX6: define struct pwm_regs and PWMCR_* defines
> pwm, imx6: add support for pwm modul on imx6
> i.MX6: add enable_spi_clk()
> spi: add config option to enable the WP pin function on st micron
> flashes
> arm, imx6: add aristainetos board
>
> Iain Paton (2):
> embestmx6boards: convert to generic board
> embest/mx6boards: only toggle eMMC usdhc3 RST line on MarSboard
>
> Magnus Lilja (1):
> i.MX31 PDK: Enable generic board for i.MX31 PDK
>
> Marek Vasut (6):
> arm: mxs: Scrub useless ifdef
> arm: m53evk: Fix RTC bus number
> ARM: mx5: Fix CHSCCDR name
> ARM: mx6: Prevent overflow in DRAM size detection
> ARM: mx6: Handle the MMDCx_MDCTL COL field caprices
> ARM: mx6: Enable Thumb build for SPL
>
> Markus Niebel (1):
> Add TQ Systems TQMa6 board support
>
> Stefano Babic (4):
> Merge branch 'master' of git://git.denx.de/u-boot
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> Update aristainetos board to Kconfig
>
> Tim Harvey (11):
> pci: mx6: fix occasional link failures
> imx: ventana: set dynamic env var for flash layout
> imx: ventana: remove caam disable per eeprom bit
> imx: ventana: add appropriate delay following GSC i2c write
> imx: ventana: add video enable gpio pinmux for GW54xx
> imx: ventana: add missing crlf to print
> imx: ventana: configure i2c_dis# pin properly for gw53xx
> imx: ventana: enable SION bit on gpio outputs
> imx: ventana: add iomux for PCISKT_WDIS# gpio
> imx: ventana: leave PCI reset de-asserted if PCI enabled
> imx: ventana: add econfig command
>
> README | 15 +
> arch/arm/Kconfig | 8 +
> arch/arm/cpu/armv7/mx6/Makefile | 1 +
> arch/arm/cpu/armv7/mx6/clock.c | 51 ++-
> arch/arm/cpu/armv7/mx6/ddr.c | 8 +-
> arch/arm/cpu/armv7/mx6/mp.c | 87 ++++++
> arch/arm/cpu/armv7/mx6/soc.c | 36 +++
> arch/arm/imx-common/cpu.c | 7 +
> arch/arm/imx-common/sata.c | 3 +-
> arch/arm/include/asm/arch-imx/cpu.h | 3 +-
> arch/arm/include/asm/arch-mx5/crm_regs.h | 2 +-
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 179 ++++++++++-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 168 +++++++++-
> arch/arm/include/asm/arch-mx6/iomux.h | 10 +
> arch/arm/include/asm/arch-mx6/mx6-ddr.h | 4 +
> arch/arm/include/asm/arch-mx6/mx6-pins.h | 2 +
> arch/arm/include/asm/arch-mx6/mx6sx-ddr.h | 45 +++
> arch/arm/include/asm/arch-mx6/mx6sx_pins.h | 1675
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/sys_proto.h | 1 +
> board/aristainetos/Kconfig | 19 ++
> board/aristainetos/MAINTAINERS | 6 +
> board/aristainetos/Makefile | 9 +
> board/aristainetos/aristainetos.c | 519
> +++++++++++++++++++++++++++++++
> board/aristainetos/aristainetos.cfg | 33 ++
> board/aristainetos/clocks.cfg | 24 ++
> board/aristainetos/ddr-setup.cfg | 61 ++++
> board/aristainetos/mt41j128M.cfg | 70 +++++
> board/boundary/nitrogen6x/nitrogen6x.c | 3 +-
> board/embest/mx6boards/mx6boards.c | 1 +
> board/freescale/mx31pdk/MAINTAINERS | 2 +-
> board/freescale/mx6sabresd/mx6sabresd.c | 2 +-
> board/freescale/mx6slevk/mx6slevk.c | 3 +-
> board/freescale/mx6sxsabresd/Kconfig | 23 ++
> board/freescale/mx6sxsabresd/MAINTAINERS | 6 +
> board/freescale/mx6sxsabresd/Makefile | 6 +
> board/freescale/mx6sxsabresd/imximage.cfg | 132 ++++++++
> board/freescale/mx6sxsabresd/mx6sxsabresd.c | 295 ++++++++++++++++++
> board/gateworks/gw_ventana/eeprom.c | 168 +++++++++-
> board/gateworks/gw_ventana/gsc.c | 2 +-
> board/gateworks/gw_ventana/gw_ventana.c | 271 +++++++---------
> board/gateworks/gw_ventana/ventana_eeprom.h | 11 +
> board/solidrun/hummingboard/hummingboard.c | 3 +-
> board/tqc/tqma6/tqma6.c | 262 ++++++++++++++++
> board/tqc/tqma6/tqma6_bb.h | 30 ++
> board/tqc/tqma6/tqma6_mba6.c | 361 +++++++++++++++++++++
> board/tqc/tqma6/tqma6q.cfg | 125 ++++++++
> board/tqc/tqma6/tqma6s.cfg | 125 ++++++++
> common/board_f.c | 8 +-
> configs/aristainetos_defconfig | 3 +
> configs/mx6sxsabresd_defconfig | 3 +
> drivers/Makefile | 1 +
> drivers/mtd/spi/sf_internal.h | 4 +
> drivers/mtd/spi/sf_probe.c | 30 ++
> drivers/pci/pcie_imx.c | 8 +-
> drivers/power/pmic/pmic_pfuze100.c | 2 +-
> drivers/pwm/Makefile | 13 +
> drivers/pwm/pwm-imx-util.c | 73 +++++
> drivers/pwm/pwm-imx-util.h | 16 +
> drivers/pwm/pwm-imx.c | 59 ++++
> include/configs/aristainetos.h | 325 +++++++++++++++++++
> include/configs/embestmx6boards.h | 2 +
> include/configs/gw_ventana.h | 5 +-
> include/configs/imx6_spl.h | 1 +
> include/configs/m53evk.h | 2 +-
> include/configs/mx31pdk.h | 2 +
> include/configs/mx6_common.h | 2 +
> include/configs/mx6sxsabresd.h | 216 +++++++++++++
> include/configs/mxs.h | 2 -
> include/configs/tqma6.h | 483
> ++++++++++++++++++++++++++++
> 73 files changed, 6001 insertions(+), 205 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/mx6/mp.c
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6sx-ddr.h
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6sx_pins.h
> create mode 100644 board/aristainetos/Kconfig
> create mode 100644 board/aristainetos/MAINTAINERS
> create mode 100644 board/aristainetos/Makefile
> create mode 100644 board/aristainetos/aristainetos.c
> create mode 100644 board/aristainetos/aristainetos.cfg
> create mode 100644 board/aristainetos/clocks.cfg
> create mode 100644 board/aristainetos/ddr-setup.cfg
> create mode 100644 board/aristainetos/mt41j128M.cfg
> create mode 100644 board/freescale/mx6sxsabresd/Kconfig
> create mode 100644 board/freescale/mx6sxsabresd/MAINTAINERS
> create mode 100644 board/freescale/mx6sxsabresd/Makefile
> create mode 100644 board/freescale/mx6sxsabresd/imximage.cfg
> create mode 100644 board/freescale/mx6sxsabresd/mx6sxsabresd.c
> create mode 100644 board/tqc/tqma6/Makefile
> create mode 100644 board/tqc/tqma6/README
> create mode 100644 board/tqc/tqma6/clocks.cfg
> create mode 100644 board/tqc/tqma6/tqma6.c
> create mode 100644 board/tqc/tqma6/tqma6_bb.h
> create mode 100644 board/tqc/tqma6/tqma6_mba6.c
> create mode 100644 board/tqc/tqma6/tqma6q.cfg
> create mode 100644 board/tqc/tqma6/tqma6s.cfg
> create mode 100644 configs/aristainetos_defconfig
> create mode 100644 configs/mx6sxsabresd_defconfig
> create mode 100644 drivers/pwm/Makefile
> create mode 100644 drivers/pwm/pwm-imx-util.c
> create mode 100644 drivers/pwm/pwm-imx-util.h
> create mode 100644 drivers/pwm/pwm-imx.c
> create mode 100644 include/configs/aristainetos.h
> create mode 100644 include/configs/mx6sxsabresd.h
> create mode 100644 include/configs/tqma6.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140829/98ed2238/attachment.pgp>
prev parent reply other threads:[~2014-08-29 17:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-20 14:13 [U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
2014-08-29 17:48 ` Tom Rini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140829174828.GS19374@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.