Re: [Intel-gfx] [PATCH v2 2/2] drm/i915: Merge of visible and !visible paths for primary planes

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Wed, Sep 10, 2014 at 12:04:18PM -0300, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> 
> Fold intel_pipe_set_base() in the update primary plane path merging
> pieces of code that are common to both paths.
> 
> Basically the the pin/unpin procedures are the same for both paths
> and some checks can also be shared (some of the were moved to the
> check() stage)
> 
> v2: take Ville's comments:
> 	- remove unecessary plane check
> 	- move mutex lock to inside the conditional
> 	- make the pin fail message a debug one
> 	- add a fixme for the fastboot hack
> 	- call intel_frontbuffer_flip() after FBC update
> 
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 93 ++++++++++++++++++++++++------------
>  1 file changed, 62 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index b78f00a..1a001bf 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -11824,12 +11824,23 @@ intel_check_primary_plane(struct drm_plane *plane,
>  	struct drm_rect *dest = &state->dst;
>  	struct drm_rect *src = &state->src;
>  	const struct drm_rect *clip = &state->clip;
> +	int ret;
>  
> -	return drm_plane_helper_check_update(plane, crtc, fb,
> +	ret = drm_plane_helper_check_update(plane, crtc, fb,
>  					    src, dest, clip,
>  					    DRM_PLANE_HELPER_NO_SCALING,
>  					    DRM_PLANE_HELPER_NO_SCALING,
>  					    false, true, &state->visible);
> +	if (ret)
> +		return ret;
> +
> +	/* no fb bound */
> +	if (state->visible && !fb) {
> +		DRM_ERROR("No FB bound\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
>  }
>  
>  static int
> @@ -11841,14 +11852,34 @@ intel_commit_primary_plane(struct drm_plane *plane,
>  	struct drm_device *dev = crtc->dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	enum pipe pipe = intel_crtc->pipe;
> +	struct drm_framebuffer *old_fb = plane->fb;
>  	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
>  	struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
>  	struct intel_plane *intel_plane = to_intel_plane(plane);
>  	struct drm_rect *src = &state->src;
> -	int ret;
> +	int ret = 0;
>  
>  	intel_crtc_wait_for_pending_flips(crtc);
>  
> +	if (intel_crtc_has_pending_flip(crtc)) {
> +		DRM_ERROR("pipe is still busy with an old pageflip\n");
> +		return -EBUSY;
> +	}
> +
> +	if (plane->fb != fb) {
> +		mutex_lock(&dev->struct_mutex);
> +		ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
> +		if (ret == 0)
> +			i915_gem_track_fb(old_obj, obj,
> +					  INTEL_FRONTBUFFER_PRIMARY(pipe));
> +		mutex_unlock(&dev->struct_mutex);
> +	}
> +	if (ret != 0) {
> +		DRM_DEBUG_KMS("pin & fence failed\n");
> +		return ret;
> +	}

I'd move this error handling also inside the 'plane->fb != fb' block.
That avoids the ret=0 initialization, and more importantly it will
match what you did in the sprite code. Thanks to your efforts I'm 
already dreaming about sharing buffer pinning codes across
different plane types...

> +
>  	/*
>  	 * If clipping results in a non-visible primary plane, we'll disable
>  	 * the primary plane.  Note that this is a bit different than what
> @@ -11856,33 +11887,9 @@ intel_commit_primary_plane(struct drm_plane *plane,
>  	 * because plane->fb still gets set and pinned.
>  	 */
>  	if (!state->visible) {
> -		mutex_lock(&dev->struct_mutex);
> -
> -		/*
> -		 * Try to pin the new fb first so that we can bail out if we
> -		 * fail.
> -		 */
> -		if (plane->fb != fb) {
> -			ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
> -			if (ret) {
> -				mutex_unlock(&dev->struct_mutex);
> -				return ret;
> -			}
> -		}
> -
> -		i915_gem_track_fb(old_obj, obj,
> -				  INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe));
> -
>  		if (intel_crtc->primary_enabled)
>  			intel_disable_primary_hw_plane(plane, crtc);
>  
> -
> -		if (plane->fb != fb)
> -			if (plane->fb)
> -				intel_unpin_fb_obj(old_obj);
> -
> -		mutex_unlock(&dev->struct_mutex);
> -
>  	} else {
>  		if (intel_crtc && intel_crtc->active &&
>  		    intel_crtc->primary_enabled) {
> @@ -11902,12 +11909,36 @@ intel_commit_primary_plane(struct drm_plane *plane,
>  				intel_disable_fbc(dev);
>  			}
>  		}
> -		ret = intel_pipe_set_base(crtc, src->x1, src->y1, fb);
> -		if (ret)
> -			return ret;
>  
> -		if (!intel_crtc->primary_enabled)
> -			intel_enable_primary_hw_plane(plane, crtc);
> +		/* FIXME: kill this fastboot hack */
> +		intel_update_pipe_size(intel_crtc);
> +
> +		intel_crtc->primary_enabled = true;
> +
> +		dev_priv->display.update_primary_plane(crtc, fb, src->x1, src->y1);
> +
> +		if (intel_crtc->active)
> +			intel_frontbuffer_flip(dev,
> +					       INTEL_FRONTBUFFER_PRIMARY(pipe));
> +
> +		mutex_lock(&dev->struct_mutex);
> +		intel_update_fbc(dev);
> +		mutex_unlock(&dev->struct_mutex);

This is still done too early. We need primary->fb to be set before since
intel_update_fbc() will consult it to determine if it can now enable fbc.

Hmm. Actaully I think we may want to reorganize this code a bit more so
that it more closely resembles the sprite code. So I'm thinking
something like this:

crtc->primary->fb = fb;
crtc->x = ...;
crtc->y = ...;

intel_plane->crtc_x = ...;
intel_plane->crtc_y = ...;
...

if (crtc->active) {
	if (fbc.plane == plane && ...) {
		disable_fbc();

	if (visible)
		update_pipe_size();

	primary_enabled = visible;
	.update_primary_plane()

	intel_frontbuffer_flip()

	update_fbc();
}


> +	}
> +
> +	crtc->primary->fb = fb;
> +	crtc->x = src->x1;
> +	crtc->y = src->y1;
> +
> +	if (old_fb) {
> +		if (intel_crtc->active && old_fb != fb)
> +			intel_wait_for_vblank(dev, intel_crtc->pipe);
> +
> +		if (old_fb != fb) {
> +			mutex_lock(&dev->struct_mutex);
> +			intel_unpin_fb_obj(old_obj);
> +			mutex_unlock(&dev->struct_mutex);
> +		}
>  	}
>  
>  	intel_plane->crtc_x = state->orig_dst.x1;
> -- 
> 1.9.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC