Re: [PATCH] mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS

[Sebastian Andrzej Siewior <sebastian@breakpoint.cc>]

On 2014-09-04 19:01:57 [+0200], Sebastian Andrzej Siewior wrote:
> From: Jeff Lance <j-lance1@ti.com>
> 
> The logic in AFE_Pen_Ctrl bitmask in the CTRL register is different for five
> wire versus four or eight wire touschscreens. This patch should fix this for
> five-wire touch screens. There should be no change needed here for four and
> eight wire tousch screens.
> 
> Signed-off-by: Jeff Lance <j-lance1@ti.com>
> [bigeasy: keep the change mfd only]
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---

ping

> I've been looking at moving this piece and the idle mode setting into the
> TSC driver. Kinda odd that I have to patch within the MFD driver for this
> TSC related change.
> Anyone disagrees?
> 
>  drivers/mfd/ti_am335x_tscadc.c       | 30 +++++++++++++++++-------------
>  include/linux/mfd/ti_am335x_tscadc.h |  1 +
>  2 files changed, 18 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index dd4bf5816221..6c9cfb8c1d01 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -241,18 +241,20 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  	tscadc_writel(tscadc, REG_CLKDIV, tscadc->clk_div);
>  
>  	/* Set the control register bits */
> -	ctrl = CNTRLREG_STEPCONFIGWRT |
> -			CNTRLREG_STEPID;
> -	if (tsc_wires > 0)
> -		ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
> +	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
>  	tscadc_writel(tscadc, REG_CTRL, ctrl);
>  
>  	/* Set register bits for Idle Config Mode */
> -	if (tsc_wires > 0)
> +	if (tsc_wires > 0) {
> +		tscadc->tsc_wires = tsc_wires;
> +		if (tsc_wires == 5)
> +			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
> +		else
> +			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
>  		tscadc_idle_config(tscadc);
> +	}
>  
>  	/* Enable the TSC module enable bit */
> -	ctrl = tscadc_readl(tscadc, REG_CTRL);
>  	ctrl |= CNTRLREG_TSCSSENB;
>  	tscadc_writel(tscadc, REG_CTRL, ctrl);
>  
> @@ -324,21 +326,23 @@ static int tscadc_suspend(struct device *dev)
>  static int tscadc_resume(struct device *dev)
>  {
>  	struct ti_tscadc_dev	*tscadc_dev = dev_get_drvdata(dev);
> -	unsigned int restore, ctrl;
> +	u32 ctrl;
>  
>  	pm_runtime_get_sync(dev);
>  
>  	/* context restore */
>  	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
> -	if (tscadc_dev->tsc_cell != -1)
> -		ctrl |= CNTRLREG_TSCENB | CNTRLREG_4WIRE;
>  	tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
>  
> -	if (tscadc_dev->tsc_cell != -1)
> +	if (tscadc_dev->tsc_cell != -1) {
> +		if (tscadc_dev->tsc_wires == 5)
> +			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
> +		else
> +			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
>  		tscadc_idle_config(tscadc_dev);
> -	restore = tscadc_readl(tscadc_dev, REG_CTRL);
> -	tscadc_writel(tscadc_dev, REG_CTRL,
> -			(restore | CNTRLREG_TSCSSENB));
> +	}
> +	ctrl |= CNTRLREG_TSCSSENB;
> +	tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
>  
>  	tscadc_writel(tscadc_dev, REG_CLKDIV, tscadc_dev->clk_div);
>  
> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
> index fb96c84dada5..e2e70053470e 100644
> --- a/include/linux/mfd/ti_am335x_tscadc.h
> +++ b/include/linux/mfd/ti_am335x_tscadc.h
> @@ -155,6 +155,7 @@ struct ti_tscadc_dev {
>  	void __iomem *tscadc_base;
>  	int irq;
>  	int used_cells;	/* 1-2 */
> +	int tsc_wires;
>  	int tsc_cell;	/* -1 if not used */
>  	int adc_cell;	/* -1 if not used */
>  	struct mfd_cell cells[TSCADC_CELLS];
> -- 
> 2.1.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/