All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/2] eukrea-cpuimx35: refresh configuration
Date: Tue, 23 Sep 2014 08:05:29 +0200	[thread overview]
Message-ID: <20140923060529.GS4992@pengutronix.de> (raw)
In-Reply-To: <1411424015-16466-2-git-send-email-eric@eukrea.com>

On Tue, Sep 23, 2014 at 12:13:35AM +0200, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> ---
>  arch/arm/configs/eukrea_cpuimx35_defconfig | 61 ++++++++++++++++++------------
>  1 file changed, 36 insertions(+), 25 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/configs/eukrea_cpuimx35_defconfig b/arch/arm/configs/eukrea_cpuimx35_defconfig
> index 7569cde..4c83102 100644
> --- a/arch/arm/configs/eukrea_cpuimx35_defconfig
> +++ b/arch/arm/configs/eukrea_cpuimx35_defconfig
> @@ -1,71 +1,81 @@
>  CONFIG_ARCH_IMX=y
> -CONFIG_CACHE_L2X0=y
> -CONFIG_ARCH_IMX35=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
>  CONFIG_MACH_EUKREA_CPUIMX35=y
>  CONFIG_IMX_IIM=y
>  CONFIG_IMX_IIM_FUSE_BLOW=y
>  CONFIG_AEABI=y
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PBL_IMAGE=y
> +CONFIG_PBL_RELOCATABLE=y
>  CONFIG_MMU=y
> -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
>  CONFIG_MALLOC_SIZE=0x800000
>  CONFIG_EXPERIMENTAL=y
>  CONFIG_MALLOC_TLSF=y
> -CONFIG_LONGHELP=y
> +CONFIG_RELOCATABLE=y
>  CONFIG_GLOB=y
>  CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
> -# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
>  CONFIG_CONSOLE_ACTIVATE_ALL=y
> +CONFIG_DEFAULT_COMPRESSION_LZO=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/eukrea_cpuimx35/env"
> -CONFIG_CMD_EDIT=y
> -CONFIG_CMD_SLEEP=y
> -CONFIG_CMD_SAVEENV=y
> -CONFIG_CMD_EXPORT=y
> -CONFIG_CMD_PRINTENV=y
> -CONFIG_CMD_READLINE=y
> -CONFIG_CMD_AUTOMOUNT=y
> -CONFIG_CMD_ECHO_E=y
> -CONFIG_CMD_LOADB=y
> -CONFIG_CMD_MEMINFO=y
> +CONFIG_LONGHELP=y
>  CONFIG_CMD_IOMEM=y
> -CONFIG_CMD_MTEST=y
> -CONFIG_CMD_FLASH=y
> +CONFIG_CMD_IMD=y
> +CONFIG_CMD_MEMINFO=y
>  CONFIG_CMD_BOOTM_SHOW_TYPE=y
>  CONFIG_CMD_BOOTM_VERBOSE=y
>  CONFIG_CMD_BOOTM_INITRD=y
>  CONFIG_CMD_BOOTM_OFTREE=y
>  CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
> -CONFIG_CMD_RESET=y
>  CONFIG_CMD_GO=y
> -CONFIG_CMD_OFTREE=y
> -CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_RESET=y
>  CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_AUTOMOUNT=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_PRINTENV=y
>  CONFIG_CMD_MAGICVAR=y
>  CONFIG_CMD_MAGICVAR_HELP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MIITOOL=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_TFTP=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_EDIT=y
>  CONFIG_CMD_SPLASH=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_MM=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_DETECT=y
> +CONFIG_CMD_FLASH=y
>  CONFIG_CMD_GPIO=y
> -CONFIG_CMD_UNCOMPRESS=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_LED=y
>  CONFIG_CMD_LED_TRIGGER=y
> +CONFIG_CMD_USBGADGET=y
> +CONFIG_CMD_OFTREE=y
>  CONFIG_NET=y
> -CONFIG_CMD_DHCP=y
>  CONFIG_NET_NFS=y
> -CONFIG_CMD_PING=y
> -CONFIG_CMD_TFTP=y
> -CONFIG_FS_TFTP=y
>  CONFIG_NET_NETCONSOLE=y
>  CONFIG_DRIVER_NET_FEC_IMX=y
> +CONFIG_SMSC_PHY=y
>  # CONFIG_SPI is not set
>  CONFIG_I2C=y
>  CONFIG_I2C_IMX=y
>  CONFIG_MTD=y
>  CONFIG_MTD_RAW_DEVICE=y
>  CONFIG_NAND=y
> +CONFIG_NAND_ALLOW_ERASE_BAD=y
>  CONFIG_NAND_IMX=y
> +CONFIG_NAND_IMX_BBM=y
>  CONFIG_USB_HOST=y
>  CONFIG_USB_EHCI=y
>  CONFIG_USB_STORAGE=y
> @@ -79,6 +89,7 @@ CONFIG_MCI_IMX_ESDHC=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> +CONFIG_FS_TFTP=y
>  CONFIG_FS_FAT=y
>  CONFIG_FS_FAT_WRITE=y
>  CONFIG_FS_FAT_LFN=y
> -- 
> 1.9.3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-09-23  6:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-22 22:13 [PATCH 1/2] serial-imx: fix for non of usage Eric Bénard
2014-09-22 22:13 ` [PATCH 2/2] eukrea-cpuimx35: refresh configuration Eric Bénard
2014-09-23  6:05   ` Sascha Hauer [this message]
2014-09-23  6:04 ` [PATCH 1/2] serial-imx: fix for non of usage Sascha Hauer
2014-09-23  6:15   ` Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140923060529.GS4992@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=eric@eukrea.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.