diff for duplicates of <20140924172151.GD422@ilina-mac> diff --git a/a/1.txt b/N1/1.txt index 5499b11..996e7e9 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -62,7 +62,7 @@ On Wed, Sep 24 2014 at 10:33 -0600, Kumar Gala wrote: >> +- qcom,cpu: phandle for the CPU that the SPM block is attached to. >> + This field is required on only for SPMs that control the CPU. > ->Let’s make this just cpu-handle instead of qcom,cpu. The concept of a handle to a cpu is pretty generic. +>Let?s make this just cpu-handle instead of qcom,cpu. The concept of a handle to a cpu is pretty generic. > Okay. Will look into it. You mean just the property name, right? @@ -79,7 +79,7 @@ may vary between the SoC. Its how the SPM on the SoC interprets it. >> +- qcom,saw2-delays: The SPM delay values that SPM sequences would refer to. >> + The register for this property is MSM_SPM_REG_SAW2_SPM_DLY. > ->Didn’t Stephen asked about splitting this up? Or at least treating it as an array of 3 values? +>Didn?t Stephen asked about splitting this up? Or at least treating it as an array of 3 values? > Yes he did. My response was similar to the clk-div values, its not something you can change without hardware spec documentation. @@ -99,19 +99,19 @@ Okay, sure. >> + >> +- qcom,saw2-spm-cmd-wfi: The WFI command sequence > ->probably add something like: “array of bytes …” (want to convey the data type somehow, is there a max length?) +>probably add something like: ?array of bytes ?? (want to convey the data type somehow, is there a max length?) > Okay. >> +- qcom,saw2-spm-cmd-spc: The Standalone PC command sequence > ->probably add something like: “array of bytes …” (want to convey the data type somehow, is there a max length?) +>probably add something like: ?array of bytes ?? (want to convey the data type somehow, is there a max length?) > Okay. >> + >> +Example: ->> + spm@f9089000 { +>> + spm at f9089000 { >> + compatible = "qcom,spm-v2.1"; >> + #address-cells = <1>; >> + #size-cells = <1>; diff --git a/a/content_digest b/N1/content_digest index 792e42b..5592115 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,18 +1,10 @@ "ref\01411516281-58328-1-git-send-email-lina.iyer@linaro.org\0" "ref\01411516281-58328-2-git-send-email-lina.iyer@linaro.org\0" "ref\0F743E5F0-28C1-4A9D-A27D-73EA70A01B46@codeaurora.org\0" - "From\0Lina Iyer <lina.iyer@linaro.org>\0" - "Subject\0Re: [PATCH v6 1/5] qcom: spm: Add Subsystem Power Manager driver\0" + "From\0lina.iyer@linaro.org (Lina Iyer)\0" + "Subject\0[PATCH v6 1/5] qcom: spm: Add Subsystem Power Manager driver\0" "Date\0Wed, 24 Sep 2014 11:21:51 -0600\0" - "To\0Kumar Gala <galak@codeaurora.org>\0" - "Cc\0sboyd@codeaurora.org" - daniel.lezcano@linaro.org - linux-arm-msm@vger.kernel.org - linux-arm-kernel@lists.infradead.org - khilman@linaro.org - msivasub@codeaurora.org - lorenzo.pieralisi@arm.com - " linux-pm@vger.kernel.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On Wed, Sep 24 2014 at 10:33 -0600, Kumar Gala wrote:\n" @@ -79,7 +71,7 @@ ">> +- qcom,cpu: phandle for the CPU that the SPM block is attached to.\n" ">> +\tThis field is required on only for SPMs that control the CPU.\n" ">\n" - ">Let\342\200\231s make this just cpu-handle instead of qcom,cpu. The concept of a handle to a cpu is pretty generic.\n" + ">Let?s make this just cpu-handle instead of qcom,cpu. The concept of a handle to a cpu is pretty generic.\n" ">\n" "Okay. Will look into it.\n" "You mean just the property name, right?\n" @@ -96,7 +88,7 @@ ">> +- qcom,saw2-delays: The SPM delay values that SPM sequences would refer to.\n" ">> +\tThe register for this property is MSM_SPM_REG_SAW2_SPM_DLY.\n" ">\n" - ">Didn\342\200\231t Stephen asked about splitting this up? Or at least treating it as an array of 3 values?\n" + ">Didn?t Stephen asked about splitting this up? Or at least treating it as an array of 3 values?\n" ">\n" "Yes he did. My response was similar to the clk-div values, its not\n" "something you can change without hardware spec documentation.\n" @@ -116,19 +108,19 @@ ">> +\n" ">> +- qcom,saw2-spm-cmd-wfi: The WFI command sequence\n" ">\n" - ">probably add something like: \342\200\234array of bytes \342\200\246\342\200\235 (want to convey the data type somehow, is there a max length?)\n" + ">probably add something like: ?array of bytes ?? (want to convey the data type somehow, is there a max length?)\n" ">\n" "Okay.\n" "\n" ">> +- qcom,saw2-spm-cmd-spc: The Standalone PC command sequence\n" ">\n" - ">probably add something like: \342\200\234array of bytes \342\200\246\342\200\235 (want to convey the data type somehow, is there a max length?)\n" + ">probably add something like: ?array of bytes ?? (want to convey the data type somehow, is there a max length?)\n" ">\n" "Okay.\n" "\n" ">> +\n" ">> +Example:\n" - ">> +\tspm@f9089000 {\n" + ">> +\tspm at f9089000 {\n" ">> +\t\tcompatible = \"qcom,spm-v2.1\";\n" ">> +\t\t#address-cells = <1>;\n" ">> +\t\t#size-cells = <1>;\n" @@ -151,4 +143,4 @@ ">Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation\n" > -270efb96705b9ad2999ae6bdfe651bc544027e69beeed33e308cbfd4496cdc7c +cffd13fe20a538f4048a46734320bb8502421b96a6193c4f3b5ce49cde3ae3c7
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.