From: Benjamin Block <bebl@mageta.org>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
linux-kernel@vger.kernel.org
Subject: drm: i915: regression in i915 after suspend (render ring initialization failed; v3.16.3)
Date: Wed, 1 Oct 2014 12:34:05 +0200 [thread overview]
Message-ID: <20141001103405.GC472@kalium> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1144 bytes --]
Hej,
since some kernel-versions I can't get my intel-card to work after I
suspended my laptop. I currently run stable v3.16.3. After (re-)boot, the
graphic-acceleration works fine; upon suspending the laptop to ram and
waking it up later, this pops up in the kernel-log:
[54251.683106] [drm:init_ring_common] *ERROR* render ring initialization
failed ctl 0001f001 (valid? 1) head 8163e50c tail 00000000 start
00042000 [expected 00042000]
[54251.683109] [drm:__i915_drm_thaw] *ERROR* failed to re-initialize
GPU, declaring wedged!
After that I can still use X normally, but everything that involves
acceleration won't work anymore (including videos and such). I saw there
was a fix for this some time ago, but it only got pulled into older stable
kernels. Is their any fix for this for newer kernels?
(kernel log and config attached)
--
best regards,
- Benjamin Block
--
oh okay. my mistake.
Yafcot:atj(*),
mark
* Yet another fool coming over this: according to joey
-- mark@mail.novare.net
[-- Attachment #1.2: linux-3.16.3.config --]
[-- Type: text/plain, Size: 113021 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.16.3-gentoo Kernel Configuration
#
#
# Gentoo Linux
#
CONFIG_GENTOO_LINUX=y
CONFIG_GENTOO_LINUX_UDEV=y
#
# Support for init systems, system and service managers
#
CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
# CONFIG_GENTOO_LINUX_INIT_SYSTEMD is not set
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="ymir"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_IOSCHED_BFQ=y
CONFIG_CGROUP_BFQIO=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_BFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MK10 is not set
# CONFIG_MBARCELONA is not set
# CONFIG_MBOBCAT is not set
# CONFIG_MBULLDOZER is not set
# CONFIG_MPILEDRIVER is not set
# CONFIG_MJAGUAR is not set
# CONFIG_MPSC is not set
# CONFIG_MATOM is not set
CONFIG_MCORE2=y
# CONFIG_MCOREI7 is not set
# CONFIG_MCOREI7AVX is not set
# CONFIG_MCOREAVXI is not set
# CONFIG_MCOREAVX2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_MNATIVE is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_EARLY=y
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_ZBUD=y
CONFIG_ZSWAP=y
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda2"
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_IOSF_MBI=m
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=y
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=y
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_SIP is not set
# CONFIG_NF_NAT_TFTP is not set
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NFT_EXTHDR=y
CONFIG_NFT_META=y
CONFIG_NFT_CT=y
CONFIG_NFT_RBTREE=y
CONFIG_NFT_HASH=y
CONFIG_NFT_COUNTER=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_NAT=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_TABLES_IPV4=y
# CONFIG_NFT_CHAIN_ROUTE_IPV4 is not set
CONFIG_NFT_CHAIN_NAT_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
# CONFIG_NF_TABLES_ARP is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT_IPV4=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PPTP=y
# CONFIG_NF_NAT_H323 is not set
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_NF_TABLES_IPV6=y
# CONFIG_NFT_CHAIN_ROUTE_IPV6 is not set
CONFIG_NFT_REJECT_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RPFILTER=m
# CONFIG_IP6_NF_MATCH_RT is not set
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP6_NF_RAW is not set
# CONFIG_NF_NAT_IPV6 is not set
CONFIG_NF_TABLES_BRIDGE=y
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
CONFIG_NET_SCH_QFQ=m
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=y
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_CLS_BPF=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
# CONFIG_NET_EMATCH_META is not set
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
# CONFIG_NET_ACT_MIRRED is not set
CONFIG_NET_ACT_IPT=y
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=y
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
# CONFIG_BT_6LOWPAN is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="iwlwifi-5000-5.ucode radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin radeon/BARTS_smc.bin radeon/BONAIRE_ce.bin radeon/BONAIRE_mc.bin radeon/BONAIRE_me.bin radeon/BONAIRE_mec.bin radeon/BONAIRE_pfp.bin radeon/BONAIRE_rlc.bin radeon/BONAIRE_sdma.bin radeon/BONAIRE_smc.bin radeon/BONAIRE_uvd.bin radeon/BONAIRE_vce.bin radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/CAYMAN_smc.bin radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CEDAR_smc.bin radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin radeon/CYPRESS_smc.bin radeon/CYPRESS_uvd.bin radeon/HAINAN_ce.bin radeon/HAINAN_mc.bin radeon/HAINAN_me.bin radeon/HAINAN_pfp.bin radeon/HAINAN_rlc.bin radeon/HAINAN_smc.bin radeon/HAWAII_ce.bin radeon/HAWAII_mc.bin radeon/HAWAII_me.bin radeon/HAWAII_mec.bin radeon/HAWAII_pfp.bin radeon/HAWAII_rlc.bin radeon/HAWAII_sdma.bin radeon/HAWAII_smc.bin radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin radeon/JUNIPER_smc.bin radeon/KABINI_ce.bin radeon/KABINI_me.bin radeon/KABINI_mec.bin radeon/KABINI_pfp.bin radeon/KABINI_rlc.bin radeon/KABINI_sdma.bin radeon/KAVERI_ce.bin radeon/KAVERI_me.bin radeon/KAVERI_mec.bin radeon/KAVERI_pfp.bin radeon/KAVERI_rlc.bin radeon/KAVERI_sdma.bin radeon/OLAND_ce.bin radeon/OLAND_mc.bin radeon/OLAND_me.bin radeon/OLAND_pfp.bin radeon/OLAND_rlc.bin radeon/OLAND_smc.bin radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/PITCAIRN_ce.bin radeon/PITCAIRN_mc.bin radeon/PITCAIRN_me.bin radeon/PITCAIRN_pfp.bin radeon/PITCAIRN_rlc.bin radeon/PITCAIRN_smc.bin radeon/R100_cp.bin radeon/R200_cp.bin radeon/R300_cp.bin radeon/R420_cp.bin radeon/R520_cp.bin radeon/R600_me.bin radeon/R600_pfp.bin radeon/R600_rlc.bin radeon/R700_rlc.bin radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/RS600_cp.bin radeon/RS690_cp.bin radeon/RS780_me.bin radeon/RS780_pfp.bin radeon/RV610_me.bin radeon/RV610_pfp.bin radeon/RV620_me.bin radeon/RV620_pfp.bin radeon/RV630_me.bin radeon/RV630_pfp.bin radeon/RV635_me.bin radeon/RV635_pfp.bin radeon/RV670_me.bin radeon/RV670_pfp.bin radeon/RV710_me.bin radeon/RV710_pfp.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin radeon/RV730_me.bin radeon/RV730_pfp.bin radeon/RV730_smc.bin radeon/RV740_smc.bin radeon/RV770_me.bin radeon/RV770_pfp.bin radeon/RV770_smc.bin radeon/SUMO2_me.bin radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/TAHITI_ce.bin radeon/TAHITI_mc.bin radeon/TAHITI_me.bin radeon/TAHITI_pfp.bin radeon/TAHITI_rlc.bin radeon/TAHITI_smc.bin radeon/TAHITI_uvd.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/VERDE_ce.bin radeon/VERDE_mc.bin radeon/VERDE_me.bin radeon/VERDE_pfp.bin radeon/VERDE_rlc.bin radeon/VERDE_smc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_CMA is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
# CONFIG_PARIDE_PF is not set
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=y
CONFIG_ZRAM_LZ4_COMPRESS=y
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=4
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC Host Driver
#
# CONFIG_INTEL_MIC_HOST is not set
#
# Intel MIC Card Driver
#
# CONFIG_INTEL_MIC_CARD is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=y
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
CONFIG_VETH=m
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=y
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_SH_ETH is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=y
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=m
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=y
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=y
CONFIG_IWLMVM=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL_CARDS is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
# CONFIG_CW1200 is not set
# CONFIG_RSI_91X is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
#
# KCopy
#
CONFIG_KCOPY=y
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_PARPORT is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
# CONFIG_PINMUX is not set
# CONFIG_PINCONF is not set
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_TEST_POWER=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
# CONFIG_ACPI_INT3403_THERMAL is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
# CONFIG_RC_DEVICES is not set
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_VIDEO_USBTV is not set
#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
# CONFIG_CYPRESS_FIRMWARE is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
CONFIG_VGA_SWITCHEROO=y
#
# Direct Rendering Manager
#
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_PTN3460 is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_UMS is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=1024
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FB_CON_DECOR=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=60
# CONFIG_SND_USB is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
CONFIG_SND_FIREWIRE_SPEAKERS=m
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SCS1X is not set
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_RMI=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=m
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_ZTE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=y
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_GHES=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_SBRIDGE is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=m
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_XGENE is not set
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_DMA_ACPI=y
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not set
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_IPS=y
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_INTEL_OAKTRAIL=y
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
# CONFIG_PVPANIC is not set
# CONFIG_CHROME_PLATFORMS is not set
#
# SOC (System On Chip) specific Drivers
#
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_IIO=m
# CONFIG_IIO_BUFFER is not set
# CONFIG_IIO_TRIGGER is not set
#
# Accelerometers
#
# CONFIG_BMA180 is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_MMA8452 is not set
#
# Analog to digital converters
#
# CONFIG_AD799X is not set
# CONFIG_MAX1363 is not set
# CONFIG_MCP3422 is not set
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
#
# Amplifiers
#
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
# CONFIG_HID_SENSOR_IIO_TRIGGER is not set
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5446 is not set
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
#
# Digital gyroscope sensors
#
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set
#
# Humidity sensors
#
# CONFIG_SI7005 is not set
#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set
#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_APDS9300 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM36651 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_HID_SENSOR_PROX is not set
# CONFIG_LTR501 is not set
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL4531 is not set
# CONFIG_VCNL4000 is not set
#
# Magnetometer sensors
#
# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
#
# Pressure sensors
#
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_MPL115 is not set
# CONFIG_MPL3115 is not set
# CONFIG_IIO_ST_PRESS is not set
#
# Lightning sensors
#
#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=y
# CONFIG_MCB is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_UEFI_CPER=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_HFSPLUS_FS_POSIX_ACL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
# CONFIG_CIFS_DEBUG is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SMB2 is not set
CONFIG_CIFS_FSCACHE=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=5
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_MODULE is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_BIG_KEYS is not set
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
# CONFIG_X509_CERTIFICATE_PARSER is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
[-- Attachment #1.3: kernel.log --]
[-- Type: text/plain, Size: 276714 bytes --]
kern :info : [ 0.000000] Initializing cgroup subsys cpuset
kern :info : [ 0.000000] Initializing cgroup subsys cpu
kern :info : [ 0.000000] Initializing cgroup subsys cpuacct
kern :notice: [ 0.000000] Linux version 3.16.3-gentoo (root@ymir) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #1 SMP Thu Sep 25 16:54:52 CEST 2014
kern :info : [ 0.000000] Command line: BOOT_IMAGE=/boot/gentoo-linux-3.16.3-gentoo root=/dev/sda3 ro console=tty1 video=1680x1050 splash=silent,fadein,theme:livedvd-12.0 net.ifnames=0 radeon.dpm=1
kern :info : [ 0.000000] Disabled fast string operations
kern :info : [ 0.000000] e820: BIOS-provided physical RAM map:
kern :info : [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
kern :info : [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000000d6000-0x00000000000d7fff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd4a0fff] usable
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd4a1000-0x00000000bd4a6fff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd4a7000-0x00000000bd5b7fff] usable
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd5b8000-0x00000000bd60efff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd60f000-0x00000000bd6c5fff] usable
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6c6000-0x00000000bd6d0fff] ACPI NVS
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6d1000-0x00000000bd6d3fff] ACPI data
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6d4000-0x00000000bd6d7fff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6d8000-0x00000000bd6dbfff] ACPI NVS
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6dc000-0x00000000bd6defff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6df000-0x00000000bd705fff] ACPI NVS
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd706000-0x00000000bd707fff] ACPI data
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd708000-0x00000000bd90efff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd90f000-0x00000000bd99efff] ACPI NVS
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd99f000-0x00000000bd9fefff] ACPI data
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd9ff000-0x00000000bd9fffff] usable
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
kern :info : [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023bffffff] usable
kern :info : [ 0.000000] NX (Execute Disable) protection: active
kern :info : [ 0.000000] SMBIOS 2.4 present.
kern :debug : [ 0.000000] DMI: LENOVO 2082BSG/2082BSG, BIOS 7VET80WW (3.10 ) 10/02/2009
kern :debug : [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
kern :debug : [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
kern :info : [ 0.000000] AGP: No AGP bridge found
kern :info : [ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
kern :debug : [ 0.000000] MTRR default type: uncachable
kern :debug : [ 0.000000] MTRR fixed ranges enabled:
kern :debug : [ 0.000000] 00000-9FFFF write-back
kern :debug : [ 0.000000] A0000-BFFFF uncachable
kern :debug : [ 0.000000] C0000-D7FFF write-protect
kern :debug : [ 0.000000] D8000-DBFFF uncachable
kern :debug : [ 0.000000] DC000-FFFFF write-protect
kern :debug : [ 0.000000] MTRR variable ranges enabled:
kern :debug : [ 0.000000] 0 base 23C000000 mask FFC000000 uncachable
kern :debug : [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
kern :debug : [ 0.000000] 2 base 000000000 mask F80000000 write-back
kern :debug : [ 0.000000] 3 base 080000000 mask FC0000000 write-back
kern :debug : [ 0.000000] 4 base 100000000 mask F00000000 write-back
kern :debug : [ 0.000000] 5 base 200000000 mask FC0000000 write-back
kern :debug : [ 0.000000] 6 base 0BDE00000 mask FFFE00000 uncachable
kern :info : [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kern :debug : [ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
kern :info : [ 0.000000] e820: last_pfn = 0xbda00 max_arch_pfn = 0x400000000
kern :info : [ 0.000000] found SMP MP-table at [mem 0x000f6490-0x000f649f] mapped at [ffff8800000f6490]
kern :info : [ 0.000000] Scanning 1 areas for low memory corruption
kern :debug : [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
kern :info : [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
kern :debug : [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
kern :debug : [ 0.000000] BRK [0x0275a000, 0x0275afff] PGTABLE
kern :debug : [ 0.000000] BRK [0x0275b000, 0x0275bfff] PGTABLE
kern :debug : [ 0.000000] BRK [0x0275c000, 0x0275cfff] PGTABLE
kern :info : [ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
kern :debug : [ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M
kern :debug : [ 0.000000] BRK [0x0275d000, 0x0275dfff] PGTABLE
kern :info : [ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
kern :debug : [ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M
kern :info : [ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
kern :debug : [ 0.000000] [mem 0x200000000-0x237ffffff] page 2M
kern :info : [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbd4a0fff]
kern :debug : [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
kern :debug : [ 0.000000] [mem 0x00200000-0xbd3fffff] page 2M
kern :debug : [ 0.000000] [mem 0xbd400000-0xbd4a0fff] page 4k
kern :info : [ 0.000000] init_memory_mapping: [mem 0xbd4a7000-0xbd5b7fff]
kern :debug : [ 0.000000] [mem 0xbd4a7000-0xbd5b7fff] page 4k
kern :info : [ 0.000000] init_memory_mapping: [mem 0xbd60f000-0xbd6c5fff]
kern :debug : [ 0.000000] [mem 0xbd60f000-0xbd6c5fff] page 4k
kern :debug : [ 0.000000] BRK [0x0275e000, 0x0275efff] PGTABLE
kern :info : [ 0.000000] init_memory_mapping: [mem 0xbd9ff000-0xbd9fffff]
kern :debug : [ 0.000000] [mem 0xbd9ff000-0xbd9fffff] page 4k
kern :debug : [ 0.000000] BRK [0x0275f000, 0x0275ffff] PGTABLE
kern :info : [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
kern :debug : [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
kern :info : [ 0.000000] RAMDISK: [mem 0x37ea8000-0x37f4bfff]
kern :info : [ 0.000000] ACPI: Early table checksum verification disabled
kern :notice: [ 0.000000] ACPI: RSDP 0x00000000000F6450 000024 (v02 LENOVO)
kern :notice: [ 0.000000] ACPI: XSDT 0x00000000BD949C22 000094 (v01 LENOVO TP-7V 00003100 LTP 00000000)
kern :notice: [ 0.000000] ACPI: FACP 0x00000000BD949D00 0000F4 (v03 LENOVO TP-7V 00003100 LNVO 00000001)
kern :notice: [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20140424/tbfadt-618)
kern :notice: [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140424/tbfadt-699)
kern :notice: [ 0.000000] ACPI: DSDT 0x00000000BD94A10E 00FAC1 (v01 LENOVO TP-7V 00003100 MSFT 03000000)
kern :notice: [ 0.000000] ACPI: FACS 0x00000000BD98E000 000040
kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD949EB4 00025A (v01 LENOVO TP-7V 00003100 MSFT 03000000)
kern :notice: [ 0.000000] ACPI: ECDT 0x00000000BD959BCF 000052 (v01 LENOVO TP-7V 00003100 LNVO 00000001)
kern :notice: [ 0.000000] ACPI: APIC 0x00000000BD959C21 000078 (v01 LENOVO TP-7V 00003100 LNVO 00000001)
kern :notice: [ 0.000000] ACPI: MCFG 0x00000000BD959C99 00003C (v01 LENOVO TP-7V 00003100 LNVO 00000001)
kern :notice: [ 0.000000] ACPI: HPET 0x00000000BD959CD5 000038 (v01 LENOVO TP-7V 00003100 LNVO 00000001)
kern :notice: [ 0.000000] ACPI: SLIC 0x00000000BD959E62 000176 (v01 LENOVO TP-7V 00003100 LTP 00000000)
kern :notice: [ 0.000000] ACPI: BOOT 0x00000000BD959FD8 000028 (v01 LENOVO TP-7V 00003100 LTP 00000001)
kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD98D1FA 000568 (v01 LENOVO TP-7V 00003100 INTL 20050513)
kern :notice: [ 0.000000] ACPI: TCPA 0x00000000BD707000 000032 (v00 00000000 00000000)
kern :notice: [ 0.000000] ACPI: DMAR 0x00000000BD706000 000110 (v01 ? 00000001 00000000)
kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD6D3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD6D2000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD6D1000 000242 (v01 PmRef ApTst 00003000 INTL 20050624)
kern :notice: [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T500
kern :debug : [ 0.000000] ACPI: Local APIC address 0xfee00000
kern :debug : [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
kern :notice: [ 0.000000] Zone ranges:
kern :notice: [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
kern :notice: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
kern :notice: [ 0.000000] Normal [mem 0x100000000-0x23bffffff]
kern :notice: [ 0.000000] Movable zone start for each node
kern :notice: [ 0.000000] Early memory node ranges
kern :notice: [ 0.000000] node 0: [mem 0x00001000-0x00099fff]
kern :notice: [ 0.000000] node 0: [mem 0x00100000-0xbd4a0fff]
kern :notice: [ 0.000000] node 0: [mem 0xbd4a7000-0xbd5b7fff]
kern :notice: [ 0.000000] node 0: [mem 0xbd60f000-0xbd6c5fff]
kern :notice: [ 0.000000] node 0: [mem 0xbd9ff000-0xbd9fffff]
kern :notice: [ 0.000000] node 0: [mem 0x100000000-0x23bffffff]
kern :debug : [ 0.000000] On node 0 totalpages: 2070019
kern :debug : [ 0.000000] DMA zone: 64 pages used for memmap
kern :debug : [ 0.000000] DMA zone: 21 pages reserved
kern :debug : [ 0.000000] DMA zone: 3993 pages, LIFO batch:0
kern :debug : [ 0.000000] DMA32 zone: 12058 pages used for memmap
kern :debug : [ 0.000000] DMA32 zone: 771690 pages, LIFO batch:31
kern :debug : [ 0.000000] Normal zone: 20224 pages used for memmap
kern :debug : [ 0.000000] Normal zone: 1294336 pages, LIFO batch:31
kern :info : [ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
kern :info : [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
kern :debug : [ 0.000000] ACPI: Local APIC address 0xfee00000
kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
kern :info : [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
kern :info : [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
kern :info : [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
kern :info : [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
kern :info : [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
kern :info : [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
kern :debug : [ 0.000000] ACPI: IRQ0 used by override.
kern :debug : [ 0.000000] ACPI: IRQ2 used by override.
kern :debug : [ 0.000000] ACPI: IRQ9 used by override.
kern :info : [ 0.000000] Using ACPI (MADT) for SMP configuration information
kern :info : [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
kern :info : [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
kern :debug : [ 0.000000] nr_irqs_gsi: 40
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d5fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000d6000-0x000d7fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000dbfff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd4a1000-0xbd4a6fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd5b8000-0xbd60efff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6c6000-0xbd6d0fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6d1000-0xbd6d3fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6d4000-0xbd6d7fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6d8000-0xbd6dbfff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6dc000-0xbd6defff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6df000-0xbd705fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd706000-0xbd707fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd708000-0xbd90efff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd90f000-0xbd99efff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd99f000-0xbd9fefff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbda00000-0xbdbfffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbdc00000-0xbfffffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed0ffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
kern :info : [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
kern :info : [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
kern :info : [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023bc00000 s80448 r8192 d21952 u524288
kern :debug : [ 0.000000] pcpu-alloc: s80448 r8192 d21952 u524288 alloc=1*2097152
kern :debug : [ 0.000000] pcpu-alloc: [0] 0 1 2 3
kern :notice: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037652
kern :notice: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/gentoo-linux-3.16.3-gentoo root=/dev/sda3 ro console=tty1 video=1680x1050 splash=silent,fadein,theme:livedvd-12.0 net.ifnames=0 radeon.dpm=1
kern :info : [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
kern :info : [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
kern :info : [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
kern :info : [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
kern :info : [ 0.000000] AGP: Checking aperture...
kern :info : [ 0.000000] AGP: No AGP bridge found
kern :notice: [ 0.000000] Memory: 8045372K/8280076K available (11281K kernel code, 1187K rwdata, 6976K rodata, 1068K init, 1128K bss, 234704K reserved)
kern :info : [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
kern :info : [ 0.000000] Hierarchical RCU implementation.
kern :info : [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
kern :info : [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
kern :info : [ 0.000000] Console: colour VGA+ 80x25
kern :info : [ 0.000000] console [tty1] enabled
kern :debug : [ 0.000000] hpet clockevent registered
kern :info : [ 0.000000] tsc: Fast TSC calibration using PIT
kern :info : [ 0.000000] tsc: Detected 2792.856 MHz processor
kern :info : [ 0.002011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.71 BogoMIPS (lpj=2792856)
kern :info : [ 0.002159] pid_max: default: 32768 minimum: 301
kern :info : [ 0.002236] ACPI: Core revision 20140424
kern :notice: [ 0.012203] ACPI: All ACPI Tables successfully acquired
kern :info : [ 0.013035] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
kern :info : [ 0.013112] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
kern :info : [ 0.014108] Initializing cgroup subsys devices
kern :info : [ 0.014186] Initializing cgroup subsys freezer
kern :info : [ 0.014259] Initializing cgroup subsys net_cls
kern :info : [ 0.014336] Initializing cgroup subsys blkio
kern :info : [ 0.014947] Initializing cgroup subsys bfqio
kern :info : [ 0.015025] Disabled fast string operations
kern :info : [ 0.015100] CPU: Physical Processor ID: 0
kern :info : [ 0.015171] CPU: Processor Core ID: 0
kern :info : [ 0.015243] mce: CPU supports 6 MCE banks
kern :info : [ 0.015320] CPU0: Thermal monitoring enabled (TM2)
kern :info : [ 0.015398] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
kern :info : [ 0.015625] Freeing SMP alternatives memory: 36K (ffffffff82635000 - ffffffff8263e000)
kern :info : [ 0.016233] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
kern :info : [ 0.026315] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz (fam: 06, model: 17, stepping: 0a)
kern :info : [ 0.027000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
kern :info : [ 0.027000] ... version: 2
kern :info : [ 0.027000] ... bit width: 40
kern :info : [ 0.027000] ... generic registers: 2
kern :info : [ 0.027000] ... value mask: 000000ffffffffff
kern :info : [ 0.027000] ... max period: 000000007fffffff
kern :info : [ 0.027000] ... fixed-purpose events: 3
kern :info : [ 0.027000] ... event mask: 0000000700000003
kern :info : [ 0.027159] x86: Booting SMP configuration:
kern :info : [ 0.027232] .... node #0, CPUs: #1
kern :info : [ 0.003000] Disabled fast string operations
kern :info : [ 0.039029] x86: Booted up 1 node, 2 CPUs
kern :info : [ 0.039242] smpboot: Total of 2 processors activated (11171.42 BogoMIPS)
kern :info : [ 0.040121] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
kern :info : [ 0.041071] devtmpfs: initialized
kern :info : [ 0.042051] PM: Registering ACPI NVS region [mem 0xbd6c6000-0xbd6d0fff] (45056 bytes)
kern :info : [ 0.042156] PM: Registering ACPI NVS region [mem 0xbd6d8000-0xbd6dbfff] (16384 bytes)
kern :info : [ 0.042259] PM: Registering ACPI NVS region [mem 0xbd6df000-0xbd705fff] (159744 bytes)
kern :info : [ 0.042362] PM: Registering ACPI NVS region [mem 0xbd90f000-0xbd99efff] (589824 bytes)
kern :info : [ 0.042511] pinctrl core: initialized pinctrl subsystem
kern :info : [ 0.042511] NET: Registered protocol family 16
kern :info : [ 0.043024] cpuidle: using governor ladder
kern :info : [ 0.043024] cpuidle: using governor menu
kern :info : [ 0.043024] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
kern :info : [ 0.043024] ACPI: bus type PCI registered
kern :info : [ 0.043024] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
kern :info : [ 0.043127] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
kern :info : [ 0.043233] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
kern :info : [ 0.043379] PCI: Using configuration type 1 for base access
kern :info : [ 0.049183] ACPI: Added _OSI(Module Device)
kern :info : [ 0.049183] ACPI: Added _OSI(Processor Device)
kern :info : [ 0.049215] ACPI: Added _OSI(3.0 _SCP Extensions)
kern :info : [ 0.049287] ACPI: Added _OSI(Processor Aggregator Device)
kern :info : [ 0.049287] ACPI: Added _OSI(Linux)
kern :info : [ 0.050534] ACPI : EC: EC description table is found, configuring boot EC
kern :notice: [ 0.054999] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
kern :notice: [ 0.065303] ACPI: Dynamic OEM Table Load:
kern :notice: [ 0.065461] ACPI: SSDT 0xFFFF880232BE2800 00030A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
kern :notice: [ 0.065471] ACPI: Dynamic OEM Table Load:
kern :notice: [ 0.065627] ACPI: SSDT 0xFFFF880232BBD000 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
kern :notice: [ 0.072173] ACPI: Dynamic OEM Table Load:
kern :notice: [ 0.072329] ACPI: SSDT 0xFFFF880232876400 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
kern :notice: [ 0.075057] ACPI: Dynamic OEM Table Load:
kern :notice: [ 0.075211] ACPI: SSDT 0xFFFF880231D8F3C0 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
kern :info : [ 0.080068] ACPI: Interpreter enabled
kern :notice: [ 0.080144] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
kern :notice: [ 0.080330] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
kern :info : [ 0.080525] ACPI: (supports S0 S3 S4 S5)
kern :info : [ 0.080597] ACPI: Using IOAPIC for interrupt routing
kern :info : [ 0.080695] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
kern :info : [ 0.087126] ACPI: Power Resource [PUBS] (on)
kern :info : [ 0.087167] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
kern :info : [ 0.088978] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
kern :info : [ 0.091300] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
kern :info : [ 0.092013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.092205] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.092747] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.093310] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.093850] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.094376] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.094916] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.095457] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
kern :info : [ 0.096038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
kern :info : [ 0.096116] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
kern :info : [ 0.096601] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
kern :info : [ 0.096726] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
kern :info : [ 0.097000] PCI host bridge to bus 0000:00
kern :info : [ 0.097003] pci_bus 0000:00: root bus resource [bus 00-ff]
kern :info : [ 0.097077] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
kern :info : [ 0.097152] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
kern :info : [ 0.097228] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
kern :info : [ 0.097304] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
kern :info : [ 0.097380] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
kern :debug : [ 0.097462] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
kern :debug : [ 0.098004] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
kern :debug : [ 0.098004] pci 0000:00:02.0: reg 0x10: [mem 0xf4400000-0xf47fffff 64bit]
kern :debug : [ 0.098004] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
kern :debug : [ 0.098004] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
kern :debug : [ 0.098013] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
kern :debug : [ 0.098013] pci 0000:00:02.1: reg 0x10: [mem 0xf4200000-0xf42fffff 64bit]
kern :debug : [ 0.098013] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
kern :debug : [ 0.098013] pci 0000:00:03.0: reg 0x10: [mem 0xfc325800-0xfc32580f 64bit]
kern :debug : [ 0.098013] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
kern :debug : [ 0.098013] pci 0000:00:19.0: [8086:10bf] type 00 class 0x020000
kern :debug : [ 0.098013] pci 0000:00:19.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
kern :debug : [ 0.098013] pci 0000:00:19.0: reg 0x14: [mem 0xfc324000-0xfc324fff]
kern :debug : [ 0.098013] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
kern :debug : [ 0.098060] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
kern :info : [ 0.098100] pci 0000:00:19.0: System wakeup disabled by ACPI
kern :debug : [ 0.098216] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
kern :debug : [ 0.098270] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f]
kern :info : [ 0.098358] pci 0000:00:1a.0: System wakeup disabled by ACPI
kern :debug : [ 0.099000] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
kern :debug : [ 0.099000] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f]
kern :debug : [ 0.099013] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
kern :debug : [ 0.099013] pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f]
kern :info : [ 0.099013] pci 0000:00:1a.2: System wakeup disabled by ACPI
kern :debug : [ 0.099013] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
kern :debug : [ 0.099013] pci 0000:00:1a.7: reg 0x10: [mem 0xfc325c00-0xfc325fff]
kern :debug : [ 0.099033] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
kern :info : [ 0.099071] pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :debug : [ 0.099193] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
kern :debug : [ 0.099215] pci 0000:00:1b.0: reg 0x10: [mem 0xfc320000-0xfc323fff 64bit]
kern :debug : [ 0.099316] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
kern :info : [ 0.099357] pci 0000:00:1b.0: System wakeup disabled by ACPI
kern :debug : [ 0.100000] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
kern :debug : [ 0.100000] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
kern :info : [ 0.100000] pci 0000:00:1c.0: System wakeup disabled by ACPI
kern :debug : [ 0.100013] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
kern :debug : [ 0.100013] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
kern :info : [ 0.100013] pci 0000:00:1c.1: System wakeup disabled by ACPI
kern :debug : [ 0.100013] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
kern :debug : [ 0.100106] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
kern :info : [ 0.100146] pci 0000:00:1c.2: System wakeup disabled by ACPI
kern :debug : [ 0.100262] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
kern :debug : [ 0.100368] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
kern :info : [ 0.100407] pci 0000:00:1c.3: System wakeup disabled by ACPI
kern :debug : [ 0.101003] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
kern :debug : [ 0.101003] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
kern :info : [ 0.101003] pci 0000:00:1c.4: System wakeup disabled by ACPI
kern :debug : [ 0.101013] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
kern :debug : [ 0.101013] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
kern :info : [ 0.101013] pci 0000:00:1d.0: System wakeup disabled by ACPI
kern :debug : [ 0.101042] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
kern :debug : [ 0.101095] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
kern :debug : [ 0.101203] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
kern :debug : [ 0.101256] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
kern :debug : [ 0.102001] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
kern :debug : [ 0.102001] pci 0000:00:1d.7: reg 0x10: [mem 0xfc326000-0xfc3263ff]
kern :debug : [ 0.102001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
kern :info : [ 0.102001] pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :debug : [ 0.102013] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
kern :info : [ 0.102013] pci 0000:00:1e.0: System wakeup disabled by ACPI
kern :debug : [ 0.102013] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
kern :debug : [ 0.102078] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
kern :debug : [ 0.102104] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f]
kern :debug : [ 0.102115] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
kern :debug : [ 0.102125] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817]
kern :debug : [ 0.102135] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
kern :debug : [ 0.102145] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f]
kern :debug : [ 0.102156] pci 0000:00:1f.2: reg 0x24: [mem 0xfc325000-0xfc3257ff]
kern :debug : [ 0.102223] pci 0000:00:1f.2: PME# supported from D3hot
kern :debug : [ 0.102297] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
kern :debug : [ 0.102317] pci 0000:00:1f.3: reg 0x10: [mem 0xfc326400-0xfc3264ff 64bit]
kern :debug : [ 0.102345] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f]
kern :info : [ 0.103013] pci 0000:00:1c.0: PCI bridge to [bus 02]
kern :debug : [ 0.103013] pci 0000:03:00.0: [8086:4236] type 00 class 0x028000
kern :debug : [ 0.103013] pci 0000:03:00.0: reg 0x10: [mem 0xf4300000-0xf4301fff 64bit]
kern :debug : [ 0.103013] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
kern :info : [ 0.105020] pci 0000:00:1c.1: PCI bridge to [bus 03]
kern :debug : [ 0.105101] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
kern :debug : [ 0.105205] pci 0000:04:00.0: [8086:444e] type 00 class 0x058000
kern :debug : [ 0.105236] pci 0000:04:00.0: reg 0x10: [mem 0xfc000000-0xfc0003ff]
kern :debug : [ 0.105270] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x20ff]
kern :debug : [ 0.106034] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
kern :info : [ 0.108018] pci 0000:00:1c.2: PCI bridge to [bus 04]
kern :debug : [ 0.108095] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
kern :debug : [ 0.108100] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfc0fffff]
kern :info : [ 0.108187] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
kern :debug : [ 0.108264] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
kern :debug : [ 0.108268] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
kern :debug : [ 0.108275] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
kern :info : [ 0.108348] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
kern :debug : [ 0.108425] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
kern :debug : [ 0.108429] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
kern :debug : [ 0.108436] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
kern :debug : [ 0.108497] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
kern :notice: [ 0.108519] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
kern :notice: [ 0.108624] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
kern :debug : [ 0.108743] pci 0000:15:00.0: reg 0x10: [mem 0xf4800000-0xf4800fff]
kern :debug : [ 0.108785] pci 0000:15:00.0: supports D1 D2
kern :debug : [ 0.108786] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :debug : [ 0.108850] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
kern :debug : [ 0.108875] pci 0000:15:00.1: reg 0x10: [mem 0xf4801000-0xf48017ff]
kern :debug : [ 0.108987] pci 0000:15:00.1: supports D1 D2
kern :debug : [ 0.108988] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
kern :debug : [ 0.109050] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
kern :debug : [ 0.109075] pci 0000:15:00.2: reg 0x10: [mem 0xf4801800-0xf48018ff]
kern :debug : [ 0.109187] pci 0000:15:00.2: supports D1 D2
kern :debug : [ 0.109188] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
kern :debug : [ 0.109250] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
kern :debug : [ 0.109274] pci 0000:15:00.4: reg 0x10: [mem 0xf4802000-0xf48020ff]
kern :debug : [ 0.109386] pci 0000:15:00.4: supports D1 D2
kern :debug : [ 0.109388] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
kern :debug : [ 0.109447] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
kern :debug : [ 0.109471] pci 0000:15:00.5: reg 0x10: [mem 0xf4802400-0xf48024ff]
kern :debug : [ 0.109583] pci 0000:15:00.5: supports D1 D2
kern :debug : [ 0.109584] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ 0.109692] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
kern :debug : [ 0.109771] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
kern :debug : [ 0.109776] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
kern :debug : [ 0.109783] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
kern :debug : [ 0.109784] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
kern :debug : [ 0.109786] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
kern :debug : [ 0.109788] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
kern :debug : [ 0.109789] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
kern :debug : [ 0.109791] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
kern :debug : [ 0.109849] pci_bus 0000:16: busn_res: [bus 16-18] end is updated to 17
kern :debug : [ 0.109895] pci_bus 0000:00: on NUMA node 0
kern :info : [ 0.109896] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
kern :notice: [ 0.111317] ACPI: Enabled 3 GPEs in block 00 to 3F
kern :info : [ 0.111529] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
kern :info : [ 0.112050] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
kern :info : [ 0.112125] vgaarb: loaded
kern :info : [ 0.112195] vgaarb: bridge control possible 0000:00:02.0
kern :notice: [ 0.112347] SCSI subsystem initialized
kern :debug : [ 0.112457] libata version 3.00 loaded.
kern :info : [ 0.112470] ACPI: bus type USB registered
kern :info : [ 0.112569] usbcore: registered new interface driver usbfs
kern :info : [ 0.112654] usbcore: registered new interface driver hub
kern :info : [ 0.112739] usbcore: registered new device driver usb
kern :info : [ 0.112739] Linux video capture interface: v2.00
kern :info : [ 0.113023] pps_core: LinuxPPS API ver. 1 registered
kern :info : [ 0.113096] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
kern :info : [ 0.113207] PTP clock support registered
kern :info : [ 0.113294] EDAC MC: Ver: 3.0.0
kern :info : [ 0.113548] Advanced Linux Sound Architecture Driver Initialized.
kern :info : [ 0.113625] PCI: Using ACPI for IRQ routing
kern :debug : [ 0.115932] PCI: pci_cache_line_size set to 64 bytes
kern :debug : [ 0.116024] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
kern :debug : [ 0.116026] e820: reserve RAM buffer [mem 0xbd4a1000-0xbfffffff]
kern :debug : [ 0.116028] e820: reserve RAM buffer [mem 0xbd5b8000-0xbfffffff]
kern :debug : [ 0.116029] e820: reserve RAM buffer [mem 0xbd6c6000-0xbfffffff]
kern :debug : [ 0.116031] e820: reserve RAM buffer [mem 0xbda00000-0xbfffffff]
kern :info : [ 0.116196] cfg80211: Calling CRDA to update world regulatory domain
kern :info : [ 0.116196] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
kern :info : [ 0.116196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
kern :info : [ 0.116438] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
kern :info : [ 0.118067] Switched to clocksource hpet
kern :notice: [ 0.125271] FS-Cache: Loaded
kern :info : [ 0.127527] pnp: PnP ACPI init
kern :info : [ 0.127612] ACPI: bus type PNP registered
kern :info : [ 0.148027] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
kern :info : [ 0.148105] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
kern :info : [ 0.148181] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
kern :info : [ 0.148258] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
kern :info : [ 0.148334] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
kern :info : [ 0.148409] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
kern :info : [ 0.148485] system 00:00: [mem 0x000d4000-0x000d7fff] could not be reserved
kern :info : [ 0.148561] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
kern :info : [ 0.148637] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
kern :info : [ 0.148714] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
kern :info : [ 0.148790] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
kern :info : [ 0.148866] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
kern :info : [ 0.148942] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
kern :info : [ 0.149024] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
kern :info : [ 0.149101] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
kern :debug : [ 0.149179] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
kern :info : [ 0.169225] system 00:01: [io 0x1000-0x107f] could not be reserved
kern :info : [ 0.169304] system 00:01: [io 0x1180-0x11ff] has been reserved
kern :info : [ 0.169379] system 00:01: [io 0x0800-0x080f] has been reserved
kern :info : [ 0.169456] system 00:01: [io 0x15e0-0x15ef] has been reserved
kern :info : [ 0.169531] system 00:01: [io 0x1600-0x167f] has been reserved
kern :info : [ 0.169606] system 00:01: [io 0x1680-0x169f] has been reserved
kern :info : [ 0.169681] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
kern :info : [ 0.169757] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
kern :info : [ 0.170379] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
kern :info : [ 0.170458] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
kern :info : [ 0.170533] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
kern :info : [ 0.170609] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
kern :info : [ 0.170685] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
kern :debug : [ 0.170762] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
kern :debug : [ 0.170826] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
kern :debug : [ 0.170857] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
kern :debug : [ 0.170887] pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
kern :debug : [ 0.170964] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled)
kern :debug : [ 0.171101] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
kern :info : [ 0.191464] pnp: PnP ACPI: found 7 devices
kern :info : [ 0.191537] ACPI: bus type PNP unregistered
kern :debug : [ 0.196203] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
kern :debug : [ 0.196206] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
kern :debug : [ 0.196209] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
kern :debug : [ 0.196218] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
kern :debug : [ 0.196221] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
kern :debug : [ 0.196230] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
kern :debug : [ 0.196267] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
kern :debug : [ 0.196269] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
kern :debug : [ 0.196271] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
kern :debug : [ 0.196273] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
kern :debug : [ 0.196275] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
kern :debug : [ 0.196276] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
kern :info : [ 0.196282] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
kern :info : [ 0.196361] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
kern :info : [ 0.196467] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
kern :info : [ 0.196573] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
kern :info : [ 0.196677] pci 0000:00:1c.0: BAR 7: assigned [io 0x9000-0x9fff]
kern :info : [ 0.196753] pci 0000:00:1c.1: BAR 7: assigned [io 0xa000-0xafff]
kern :info : [ 0.196829] pci 0000:00:1c.0: PCI bridge to [bus 02]
kern :info : [ 0.196904] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
kern :info : [ 0.196983] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
kern :info : [ 0.197073] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
kern :info : [ 0.197181] pci 0000:00:1c.1: PCI bridge to [bus 03]
kern :info : [ 0.197256] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
kern :info : [ 0.197334] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
kern :info : [ 0.197413] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
kern :info : [ 0.197522] pci 0000:04:00.0: BAR 6: assigned [mem 0xfc010000-0xfc01ffff pref]
kern :info : [ 0.197625] pci 0000:00:1c.2: PCI bridge to [bus 04]
kern :info : [ 0.197700] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
kern :info : [ 0.197779] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfc0fffff]
kern :info : [ 0.197858] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
kern :info : [ 0.197965] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
kern :info : [ 0.198054] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
kern :info : [ 0.198132] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
kern :info : [ 0.198211] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
kern :info : [ 0.198320] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
kern :info : [ 0.198395] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
kern :info : [ 0.198473] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
kern :info : [ 0.198551] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
kern :debug : [ 0.198661] pci 0000:15:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
kern :debug : [ 0.198663] pci 0000:15:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
kern :debug : [ 0.198665] pci 0000:15:00.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
kern :debug : [ 0.198667] pci 0000:15:00.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
kern :info : [ 0.198670] pci 0000:15:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref]
kern :info : [ 0.198774] pci 0000:15:00.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff]
kern :info : [ 0.198851] pci 0000:15:00.0: BAR 7: assigned [io 0x5000-0x50ff]
kern :info : [ 0.198926] pci 0000:15:00.0: BAR 8: assigned [io 0x5400-0x54ff]
kern :info : [ 0.199006] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [ 0.199081] pci 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [ 0.199159] pci 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [ 0.199238] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [ 0.199344] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :info : [ 0.199423] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
kern :info : [ 0.199499] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
kern :info : [ 0.199577] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
kern :info : [ 0.199656] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
kern :debug : [ 0.199764] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
kern :debug : [ 0.199766] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
kern :debug : [ 0.199767] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
kern :debug : [ 0.199769] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
kern :debug : [ 0.199770] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff]
kern :debug : [ 0.199772] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
kern :debug : [ 0.199774] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
kern :debug : [ 0.199775] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
kern :debug : [ 0.199777] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
kern :debug : [ 0.199779] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
kern :debug : [ 0.199780] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
kern :debug : [ 0.199782] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
kern :debug : [ 0.199784] pci_bus 0000:04: resource 1 [mem 0xfc000000-0xfc0fffff]
kern :debug : [ 0.199785] pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
kern :debug : [ 0.199787] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
kern :debug : [ 0.199788] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
kern :debug : [ 0.199790] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
kern :debug : [ 0.199792] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff]
kern :debug : [ 0.199793] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
kern :debug : [ 0.199795] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
kern :debug : [ 0.199797] pci_bus 0000:15: resource 0 [io 0x5000-0x8fff]
kern :debug : [ 0.199798] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
kern :debug : [ 0.199800] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
kern :debug : [ 0.199801] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
kern :debug : [ 0.199802] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
kern :debug : [ 0.199804] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
kern :debug : [ 0.199805] pci_bus 0000:15: resource 7 [mem 0x000d8000-0x000dbfff]
kern :debug : [ 0.199807] pci_bus 0000:15: resource 8 [mem 0xc0000000-0xfebfffff]
kern :debug : [ 0.199809] pci_bus 0000:16: resource 0 [io 0x5000-0x50ff]
kern :debug : [ 0.199810] pci_bus 0000:16: resource 1 [io 0x5400-0x54ff]
kern :debug : [ 0.199811] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
kern :debug : [ 0.199813] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
kern :info : [ 0.199836] NET: Registered protocol family 2
kern :info : [ 0.200065] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
kern :info : [ 0.200383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
kern :info : [ 0.200873] TCP: Hash tables configured (established 65536 bind 65536)
kern :info : [ 0.201012] TCP: reno registered
kern :info : [ 0.201087] UDP hash table entries: 4096 (order: 5, 131072 bytes)
kern :info : [ 0.201212] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
kern :info : [ 0.201374] NET: Registered protocol family 1
kern :info : [ 0.201519] RPC: Registered named UNIX socket transport module.
kern :info : [ 0.201594] RPC: Registered udp transport module.
kern :info : [ 0.201666] RPC: Registered tcp transport module.
kern :info : [ 0.201739] RPC: Registered tcp NFSv4.1 backchannel transport module.
kern :debug : [ 0.201824] pci 0000:00:02.0: Boot video device
kern :debug : [ 0.202640] PCI: CLS 64 bytes, default 64
kern :info : [ 0.202677] Trying to unpack rootfs image as initramfs...
kern :info : [ 0.209432] Freeing initrd memory: 656K (ffff880037ea8000 - ffff880037f4c000)
kern :info : [ 0.209513] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
kern :info : [ 0.209589] software IO TLB [mem 0xb94a1000-0xbd4a1000] (64MB) mapped at [ffff8800b94a1000-ffff8800bd4a0fff]
kern :info : [ 0.209767] Simple Boot Flag at 0x35 set to 0x1
kern :info : [ 0.209948] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
kern :info : [ 0.210033] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
kern :info : [ 0.210165] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
kern :info : [ 0.210429] Scanning for low memory corruption every 60 seconds
kern :info : [ 0.211018] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
kern :info : [ 0.211171] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
kern :info : [ 0.211425] sha512_ssse3: Using SSSE3 optimized SHA-512 implementation
kern :info : [ 0.211891] futex hash table entries: 1024 (order: 4, 65536 bytes)
kern :notice: [ 0.211996] Initialise system trusted keyring
kern :info : [ 0.212099] audit: initializing netlink subsys (disabled)
kern :notice: [ 0.212181] audit: type=2000 audit(1411673456.211:1): initialized
kern :info : [ 0.214185] zbud: loaded
kern :notice: [ 0.214383] VFS: Disk quotas dquot_6.5.2
kern :notice: [ 0.214502] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
kern :notice: [ 0.215072] FS-Cache: Netfs 'nfs' registered for caching
kern :notice: [ 0.215305] NFS: Registering the id_resolver key type
kern :notice: [ 0.215389] Key type id_resolver registered
kern :notice: [ 0.215466] Key type id_legacy registered
kern :info : [ 0.215547] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
kern :notice: [ 0.215674] FS-Cache: Netfs 'cifs' registered for caching
kern :notice: [ 0.215820] Key type cifs.idmap registered
kern :info : [ 0.215902] ntfs: driver 2.1.30 [Flags: R/W].
kern :info : [ 0.216113] fuse init (API version 7.23)
kern :info : [ 0.216310] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
kern :info : [ 0.216766] msgmni has been set to 15714
kern :info : [ 0.218767] alg: No test for lz4 (lz4-generic)
kern :info : [ 0.218882] alg: No test for lz4hc (lz4hc-generic)
kern :info : [ 0.218997] alg: No test for stdrng (krng)
kern :info : [ 0.222508] NET: Registered protocol family 38
kern :notice: [ 0.222585] Key type asymmetric registered
kern :info : [ 0.222697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
kern :info : [ 0.222804] io scheduler noop registered
kern :info : [ 0.222904] io scheduler cfq registered (default)
kern :info : [ 0.222981] io scheduler bfq registered
kern :info : [ 0.223060] BFQ I/O-scheduler version: v7r5
kern :debug : [ 0.223278] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
kern :debug : [ 0.223520] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
kern :debug : [ 0.223688] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
kern :debug : [ 0.223857] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
kern :debug : [ 0.224036] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
kern :info : [ 0.224189] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
kern :debug : [ 0.224268] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
kern :info : [ 0.224288] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
kern :info : [ 0.224364] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
kern :debug : [ 0.224442] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
kern :info : [ 0.224461] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
kern :info : [ 0.224538] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
kern :debug : [ 0.224616] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
kern :info : [ 0.224635] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
kern :debug : [ 0.224714] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
kern :info : [ 0.224732] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
kern :debug : [ 0.224811] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
kern :info : [ 0.224820] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
kern :info : [ 0.224960] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
kern :debug : [ 0.225100] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
kern :info : [ 0.225114] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
kern :debug : [ 0.225242] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
kern :info : [ 0.225255] pciehp 0000:00:1c.2:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
kern :debug : [ 0.225385] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
kern :info : [ 0.225398] pciehp 0000:00:1c.3:pcie04: Slot #3 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
kern :debug : [ 0.225526] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
kern :info : [ 0.225540] pciehp 0000:00:1c.4:pcie04: Slot #4 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
kern :debug : [ 0.225669] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
kern :info : [ 0.225675] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
kern :info : [ 0.225808] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
kern :debug : [ 0.225960] serial 00:05: [io 0x03f8-0x03ff]
kern :debug : [ 0.226056] serial 00:05: [irq 4]
kern :info : [ 0.226462] serial 00:05: activated
kern :info : [ 0.247137] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
kern :info : [ 0.247661] Non-volatile memory driver v1.3
kern :info : [ 0.247807] Linux agpgart interface v0.103
kern :info : [ 0.247937] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
kern :info : [ 0.248033] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
kern :info : [ 0.249725] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
kern :info : [ 0.249918] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
kern :debug : [ 0.251867] intel_idle: does not run on family 6 model 23
kern :warn : [ 0.252106] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
kern :info : [ 0.252367] ACPI: AC Adapter [AC] (on-line)
kern :info : [ 0.252524] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
kern :info : [ 0.252762] ACPI: Lid Switch [LID]
kern :info : [ 0.252927] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
kern :info : [ 0.253103] ACPI: Sleep Button [SLPB]
kern :info : [ 0.253222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
kern :info : [ 0.253331] ACPI: Power Button [PWRF]
kern :debug : [ 0.254579] Monitor-Mwait will be used to enter C-1 state
kern :debug : [ 0.254583] Monitor-Mwait will be used to enter C-2 state
kern :debug : [ 0.254586] Monitor-Mwait will be used to enter C-3 state
kern :info : [ 0.254589] tsc: Marking TSC unstable due to TSC halts in idle
kern :debug : [ 0.254671] ACPI: acpi_idle registered with cpuidle
kern :info : [ 0.256733] thermal LNXTHERM:00: registered as thermal_zone0
kern :info : [ 0.256814] ACPI: Thermal Zone [THM0] (35 C)
kern :info : [ 0.258224] thermal LNXTHERM:01: registered as thermal_zone1
kern :info : [ 0.258305] ACPI: Thermal Zone [THM1] (36 C)
kern :info : [ 0.258418] GHES: HEST is not enabled!
kern :info : [ 0.258538] [drm] Initialized drm 1.1.0 20060810
kern :info : [ 0.258699] [drm] radeon kernel modesetting enabled.
kern :info : [ 0.258851] VGA switcheroo: detected switching method \_SB_.PCI0.VID_.ATPX handle
kern :info : [ 0.259532] [drm] Memory usable by graphics device = 2048M
kern :info : [ 0.259636] [drm] Replacing VGA console driver
kern :info : [ 0.260486] Console: switching to colour dummy device 80x25
kern :debug : [ 0.267076] i915 0000:00:02.0: irq 45 for MSI/MSI-X
kern :info : [ 0.267090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern :info : [ 0.267095] [drm] Driver supports precise vblank timestamp query.
kern :info : [ 0.267197] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
kern :warn : [ 0.271920] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
kern :info : [ 0.271931] ACPI: Battery Slot [BAT0] (battery present)
kern :info : [ 0.342655] fbcon: inteldrmfb (fb0) is primary device
kern :info : [ 0.927056] Console: switching to colour frame buffer device 210x65
kern :info : [ 0.930864] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
kern :info : [ 0.930892] i915 0000:00:02.0: registered panic notifier
kern :info : [ 0.964176] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
kern :info : [ 0.972245] acpi device:01: registered as cooling_device2
kern :info : [ 0.972336] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
kern :info : [ 0.972407] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
kern :info : [ 0.972514] parport_pc 00:06: reported by Plug and Play ACPI
kern :info : [ 0.972564] parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)]
kern :info : [ 0.973966] brd: module loaded
kern :info : [ 0.974307] loop: module loaded
kern :info : [ 0.974457] zram: Created 1 device(s) ...
kern :notice: [ 0.974556] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20140424/utaddress-258)
kern :info : [ 0.974633] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kern :notice: [ 0.974676] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258)
kern :info : [ 0.974750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kern :notice: [ 0.974791] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258)
kern :info : [ 0.974864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kern :warn : [ 0.974906] lpc_ich: Resource conflict(s) found affecting gpio_ich
kern :debug : [ 0.975049] ahci 0000:00:1f.2: version 3.0
kern :debug : [ 0.975150] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
kern :info : [ 0.975186] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
kern :info : [ 0.975235] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
kern :info : [ 0.975270] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
kern :info : [ 0.975777] scsi0 : ahci
kern :info : [ 0.975869] scsi1 : ahci
kern :info : [ 0.975952] scsi2 : ahci
kern :info : [ 0.976047] scsi3 : ahci
kern :info : [ 0.976104] ata1: SATA max UDMA/133 abar m2048@0xfc325000 port 0xfc325100 irq 46
kern :info : [ 0.976139] ata2: SATA max UDMA/133 abar m2048@0xfc325000 port 0xfc325180 irq 46
kern :info : [ 0.976171] ata3: DUMMY
kern :info : [ 0.976182] ata4: DUMMY
kern :info : [ 0.976441] tun: Universal TUN/TAP device driver, 1.6
kern :info : [ 0.976463] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
kern :info : [ 0.976547] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
kern :info : [ 0.976571] e100: Copyright(c) 1999-2006 Intel Corporation
kern :info : [ 0.976615] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
kern :info : [ 0.978255] e1000: Copyright (c) 1999-2006 Intel Corporation.
kern :info : [ 0.979933] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
kern :info : [ 0.981567] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
kern :info : [ 0.983339] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
kern :debug : [ 0.985017] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
kern :info : [ 1.042333] fbcondecor: console 0 using theme 'livedvd-12.0'
kern :info : [ 1.067557] fbcondecor: switched decor state to 'on' on console 0
kern :info : [ 1.178442] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:68:18:ff:f6
kern :info : [ 1.178455] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
kern :info : [ 1.178485] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
kern :info : [ 1.178533] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
kern :info : [ 1.178539] igb: Copyright (c) 2007-2014 Intel Corporation.
kern :info : [ 1.178570] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
kern :info : [ 1.178576] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
kern :info : [ 1.178599] Intel(R) Wireless WiFi driver for Linux, in-tree:
kern :info : [ 1.178605] Copyright(c) 2003- 2014 Intel Corporation
kern :warn : [ 1.178709] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
kern :debug : [ 1.178772] iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
kern :info : [ 1.178990] usbcore: registered new interface driver cdc_ether
kern :info : [ 1.179014] usbcore: registered new interface driver cdc_eem
kern :info : [ 1.179037] usbcore: registered new interface driver cdc_ncm
kern :info : [ 1.179052] usbcore: registered new interface driver cdc_mbim
kern :info : [ 1.179283] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
kern :info : [ 1.179306] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
kern :info : [ 1.179313] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
kern :info : [ 1.179319] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
kern :info : [ 1.179325] iwlwifi 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
kern :info : [ 1.179379] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :debug : [ 1.201967] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
kern :notice: [ 1.254079] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
kern :info : [ 1.254242] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
kern :info : [ 1.292058] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :debug : [ 1.295109] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [ 1.295112] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [ 1.295118] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [ 1.295291] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [ 1.295373] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [ 1.295375] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0BB6Q, max UDMA/133
kern :info : [ 1.295381] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
kern :debug : [ 1.296661] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [ 1.296664] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [ 1.296671] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [ 1.296815] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [ 1.296872] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [ 1.296875] ata1.00: configured for UDMA/133
kern :notice: [ 1.296972] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
kern :notice: [ 1.297200] sd 0:0:0:0: Attached scsi generic sg0 type 0
kern :notice: [ 1.297275] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
kern :notice: [ 1.297343] sd 0:0:0:0: [sda] Write Protect is off
kern :debug : [ 1.297350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
kern :notice: [ 1.297371] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [ 1.297988] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
kern :notice: [ 1.298363] sd 0:0:0:0: [sda] Attached SCSI disk
kern :info : [ 1.602054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :debug : [ 1.604557] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [ 1.605828] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [ 1.605830] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [ 1.606953] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D2, max UDMA/100
kern :debug : [ 1.610150] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [ 1.611481] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [ 1.611483] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [ 1.612478] ata2.00: configured for UDMA/100
kern :notice: [ 1.615054] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D2 PQ: 0 ANSI: 5
kern :notice: [ 1.640308] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
kern :info : [ 1.640317] cdrom: Uniform CD-ROM driver Revision: 3.20
kern :debug : [ 1.640449] sr 1:0:0:0: Attached scsi CD-ROM sr0
kern :notice: [ 1.640511] sr 1:0:0:0: Attached scsi generic sg1 type 5
kern :notice: [ 1.755241] firewire_core 0000:15:00.1: created device fw0: GUID 00016c2000b3533e, S400
kern :info : [ 1.762811] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c38, PCI irq 16
kern :info : [ 1.762825] yenta_cardbus 0000:15:00.0: Socket status: 30000006
kern :info : [ 1.762834] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x5000-0x8fff]
kern :info : [ 1.762841] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff]
kern :info : [ 1.762848] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff:
kern :notice: [ 1.762855] excluding 0xf4800000-0xf4b7ffff
kern :info : [ 1.762866] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
kern :info : [ 1.762872] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
kern :notice: [ 1.762880] excluding 0xf0000000-0xf3ffffff
kern :info : [ 1.763307] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
kern :info : [ 1.763321] ehci-pci: EHCI PCI platform driver
kern :info : [ 1.763441] ehci-pci 0000:00:1a.7: EHCI Host Controller
kern :info : [ 1.763508] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
kern :info : [ 1.763528] ehci-pci 0000:00:1a.7: debug port 1
kern :debug : [ 1.767443] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
kern :info : [ 1.767461] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfc325c00
kern :info : [ 1.773100] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
kern :info : [ 1.773175] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
kern :info : [ 1.773187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.773198] usb usb1: Product: EHCI Host Controller
kern :info : [ 1.773209] usb usb1: Manufacturer: Linux 3.16.3-gentoo ehci_hcd
kern :info : [ 1.773220] usb usb1: SerialNumber: 0000:00:1a.7
kern :info : [ 1.773403] hub 1-0:1.0: USB hub found
kern :info : [ 1.773415] hub 1-0:1.0: 6 ports detected
kern :info : [ 1.773694] ehci-pci 0000:00:1d.7: EHCI Host Controller
kern :info : [ 1.773776] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
kern :info : [ 1.773798] ehci-pci 0000:00:1d.7: debug port 1
kern :debug : [ 1.777698] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
kern :info : [ 1.777710] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfc326000
kern :info : [ 1.784107] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
kern :info : [ 1.784153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
kern :info : [ 1.784166] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.784177] usb usb2: Product: EHCI Host Controller
kern :info : [ 1.784188] usb usb2: Manufacturer: Linux 3.16.3-gentoo ehci_hcd
kern :info : [ 1.784199] usb usb2: SerialNumber: 0000:00:1d.7
kern :info : [ 1.784370] hub 2-0:1.0: USB hub found
kern :info : [ 1.784380] hub 2-0:1.0: 6 ports detected
kern :info : [ 1.784599] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
kern :info : [ 1.784615] ohci-pci: OHCI PCI platform driver
kern :info : [ 1.784635] uhci_hcd: USB Universal Host Controller Interface driver
kern :info : [ 1.784711] uhci_hcd 0000:00:1a.0: UHCI Host Controller
kern :info : [ 1.784788] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
kern :info : [ 1.784836] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001840
kern :info : [ 1.784879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
kern :info : [ 1.784886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.784893] usb usb3: Product: UHCI Host Controller
kern :info : [ 1.784899] usb usb3: Manufacturer: Linux 3.16.3-gentoo uhci_hcd
kern :info : [ 1.784905] usb usb3: SerialNumber: 0000:00:1a.0
kern :info : [ 1.785049] hub 3-0:1.0: USB hub found
kern :info : [ 1.785063] hub 3-0:1.0: 2 ports detected
kern :info : [ 1.785222] uhci_hcd 0000:00:1a.1: UHCI Host Controller
kern :info : [ 1.785273] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
kern :info : [ 1.785314] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
kern :info : [ 1.785362] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
kern :info : [ 1.785369] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.785375] usb usb4: Product: UHCI Host Controller
kern :info : [ 1.785381] usb usb4: Manufacturer: Linux 3.16.3-gentoo uhci_hcd
kern :info : [ 1.785387] usb usb4: SerialNumber: 0000:00:1a.1
kern :info : [ 1.785527] hub 4-0:1.0: USB hub found
kern :info : [ 1.785537] hub 4-0:1.0: 2 ports detected
kern :info : [ 1.785702] uhci_hcd 0000:00:1a.2: UHCI Host Controller
kern :info : [ 1.785750] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
kern :info : [ 1.785793] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001880
kern :info : [ 1.785842] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
kern :info : [ 1.785848] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.785854] usb usb5: Product: UHCI Host Controller
kern :info : [ 1.785860] usb usb5: Manufacturer: Linux 3.16.3-gentoo uhci_hcd
kern :info : [ 1.785866] usb usb5: SerialNumber: 0000:00:1a.2
kern :info : [ 1.786018] hub 5-0:1.0: USB hub found
kern :info : [ 1.786029] hub 5-0:1.0: 2 ports detected
kern :info : [ 1.786190] uhci_hcd 0000:00:1d.0: UHCI Host Controller
kern :info : [ 1.786235] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
kern :info : [ 1.786269] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
kern :info : [ 1.786310] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
kern :info : [ 1.786317] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.786323] usb usb6: Product: UHCI Host Controller
kern :info : [ 1.786329] usb usb6: Manufacturer: Linux 3.16.3-gentoo uhci_hcd
kern :info : [ 1.786336] usb usb6: SerialNumber: 0000:00:1d.0
kern :info : [ 1.786468] hub 6-0:1.0: USB hub found
kern :info : [ 1.786481] hub 6-0:1.0: 2 ports detected
kern :info : [ 1.786640] uhci_hcd 0000:00:1d.1: UHCI Host Controller
kern :info : [ 1.786697] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
kern :info : [ 1.786729] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
kern :info : [ 1.786778] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
kern :info : [ 1.786784] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.786790] usb usb7: Product: UHCI Host Controller
kern :info : [ 1.786796] usb usb7: Manufacturer: Linux 3.16.3-gentoo uhci_hcd
kern :info : [ 1.786802] usb usb7: SerialNumber: 0000:00:1d.1
kern :info : [ 1.786934] hub 7-0:1.0: USB hub found
kern :info : [ 1.786944] hub 7-0:1.0: 2 ports detected
kern :info : [ 1.787107] uhci_hcd 0000:00:1d.2: UHCI Host Controller
kern :info : [ 1.787165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
kern :info : [ 1.787206] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
kern :info : [ 1.787250] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
kern :info : [ 1.787257] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ 1.787263] usb usb8: Product: UHCI Host Controller
kern :info : [ 1.787269] usb usb8: Manufacturer: Linux 3.16.3-gentoo uhci_hcd
kern :info : [ 1.787275] usb usb8: SerialNumber: 0000:00:1d.2
kern :info : [ 1.787389] hub 8-0:1.0: USB hub found
kern :info : [ 1.787400] hub 8-0:1.0: 2 ports detected
kern :info : [ 1.787545] usbcore: registered new interface driver cdc_acm
kern :info : [ 1.787551] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
kern :info : [ 1.787571] usbcore: registered new interface driver usblp
kern :info : [ 1.787590] usbcore: registered new interface driver cdc_wdm
kern :info : [ 1.787631] usbcore: registered new interface driver usb-storage
kern :info : [ 1.787679] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
kern :info : [ 1.795337] serio: i8042 KBD port at 0x60,0x64 irq 1
kern :info : [ 1.795352] serio: i8042 AUX port at 0x60,0x64 irq 12
kern :info : [ 1.795511] mousedev: PS/2 mouse device common for all mice
kern :info : [ 1.795783] input: PC Speaker as /devices/platform/pcspkr/input/input5
kern :info : [ 1.795878] rtc_cmos 00:02: RTC can wake from S4
kern :info : [ 1.796057] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
kern :info : [ 1.796090] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
kern :info : [ 1.796105] i2c /dev entries driver
kern :info : [ 1.796507] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
kern :info : [ 1.796747] IR NEC protocol handler initialized
kern :info : [ 1.796755] IR RC5(x) protocol handler initialized
kern :info : [ 1.796762] IR RC6 protocol handler initialized
kern :info : [ 1.796769] IR JVC protocol handler initialized
kern :info : [ 1.796775] IR Sony protocol handler initialized
kern :info : [ 1.796782] IR RC5 (streamzap) protocol handler initialized
kern :info : [ 1.796789] IR SANYO protocol handler initialized
kern :info : [ 1.796796] IR Sharp protocol handler initialized
kern :info : [ 1.796803] IR MCE Keyboard/mouse protocol handler initialized
kern :info : [ 1.796924] sdhci: Secure Digital Host Controller Interface driver
kern :info : [ 1.796930] sdhci: Copyright(c) Pierre Ossman
kern :info : [ 1.796950] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
kern :warn : [ 1.798019] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :info : [ 1.798030] mmc0: no vqmmc regulator found
kern :info : [ 1.798036] mmc0: no vmmc regulator found
kern :warn : [ 1.799046] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :info : [ 1.799147] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
kern :info : [ 1.799178] sdhci-pltfm: SDHCI platform and OF driver helper
kern :info : [ 1.799378] r592: driver successfully loaded
kern :info : [ 1.799424] hidraw: raw HID events driver (C) Jiri Kosina
kern :info : [ 1.799508] usbcore: registered new interface driver usbhid
kern :info : [ 1.799514] usbhid: USB HID core driver
kern :info : [ 1.819588] thinkpad_acpi: ThinkPad ACPI Extras v0.25
kern :info : [ 1.819595] thinkpad_acpi: http://ibm-acpi.sf.net/
kern :info : [ 1.819601] thinkpad_acpi: ThinkPad BIOS 7VET80WW (3.10 ), EC 7VHT12WW-1.01
kern :info : [ 1.819607] thinkpad_acpi: Lenovo ThinkPad T500, model 2082BSG
kern :info : [ 1.840540] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
kern :info : [ 1.840713] thinkpad_acpi: radio switch found; radios are enabled
kern :info : [ 1.840730] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
kern :notice: [ 1.840736] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
kern :info : [ 1.842685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
kern :info : [ 1.843267] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
kern :info : [ 1.845882] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
kern :info : [ 1.848285] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
kern :info : [ 1.848406] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
kern :info : [ 1.849324] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
kern :err : [ 1.849447] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
kern :err : [ 1.849555] intel_rapl: driver does not support CPU family 6 model 23
kern :info : [ 1.850565] GACT probability on
kern :info : [ 1.850582] u32 classifier
kern :info : [ 1.850588] Actions configured
kern :info : [ 1.850602] Netfilter messages via NETLINK v0.30.
kern :info : [ 1.850611] nfnl_acct: registering with nfnetlink.
kern :debug : [ 1.852215] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
kern :info : [ 1.852276] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
kern :info : [ 1.852390] ctnetlink v0.93: registering with nfnetlink.
kern :info : [ 1.852445] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
kern :info : [ 1.852454] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
kern :info : [ 1.852560] ipip: IPv4 over IPv4 tunneling driver
kern :info : [ 1.853755] ip_tables: (C) 2000-2006 Netfilter Core Team
kern :info : [ 1.853846] TCP: cubic registered
kern :info : [ 1.853853] Initializing XFRM netlink socket
kern :info : [ 1.854479] NET: Registered protocol family 10
kern :info : [ 1.854810] ip6_tables: (C) 2000-2006 Netfilter Core Team
kern :info : [ 1.856519] sit: IPv6 over IPv4 tunneling driver
kern :info : [ 1.856632] NET: Registered protocol family 17
kern :info : [ 1.856644] NET: Registered protocol family 15
kern :notice: [ 1.856780] Bridge firewalling registered
kern :notice: [ 1.856807] Key type dns_resolver registered
kern :notice: [ 1.857091] Loading compiled-in X.509 certificates
kern :info : [ 1.857104] registered taskstats version 1
kern :info : [ 1.857613] console [netcon0] enabled
kern :info : [ 1.857619] netconsole: network logging started
kern :info : [ 1.860967] sound hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
kern :info : [ 1.861061] ALSA device list:
kern :info : [ 1.861069] #29: ThinkPad Console Audio Control at EC reg 0x30, fw 7VHT12WW-1.01
kern :info : [ 1.861414] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
kern :info : [ 1.861421] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
kern :info : [ 1.861428] sound hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
kern :info : [ 1.861434] sound hdaudioC0D0: mono: mono_out=0x0
kern :info : [ 1.861440] sound hdaudioC0D0: dig-out=0x1c/0x0
kern :info : [ 1.861446] sound hdaudioC0D0: inputs:
kern :info : [ 1.861453] sound hdaudioC0D0: Mic=0x18
kern :info : [ 1.861459] sound hdaudioC0D0: Internal Mic=0x1d
kern :info : [ 1.861465] sound hdaudioC0D0: Dock Mic=0x17
kern :info : [ 1.862500] sound hdaudioC0D0: Enable sync_write for stable communication
kern :info : [ 1.862575] sound hdaudioC0D1: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
kern :info : [ 1.862582] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
kern :info : [ 1.862589] sound hdaudioC0D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
kern :info : [ 1.862595] sound hdaudioC0D1: mono: mono_out=0x0
kern :info : [ 1.862600] sound hdaudioC0D1: inputs:
kern :info : [ 1.867915] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
kern :info : [ 1.868017] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
kern :info : [ 1.868084] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
kern :info : [ 1.868144] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
kern :info : [ 2.671363] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000, board id: 71, fw id: 434116
kern :info : [ 2.671397] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
kern :info : [ 2.683184] usb 1-5: new high-speed USB device number 4 using ehci-pci
kern :info : [ 2.714203] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
kern :err : [ 2.719923] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
kern :err : [ 2.720235] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
kern :info : [ 2.733772] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
kern :info : [ 2.733787] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
kern :info : [ 2.745230] devtmpfs: mounted
kern :info : [ 2.747103] Freeing unused kernel memory: 1068K (ffffffff8252a000 - ffffffff82635000)
kern :info : [ 2.747114] Write protecting the kernel read-only data: 20480k
kern :info : [ 2.750942] Freeing unused kernel memory: 992K (ffff880001b08000 - ffff880001c00000)
kern :info : [ 2.754472] Freeing unused kernel memory: 1216K (ffff8800022d0000 - ffff880002400000)
kern :info : [ 2.797398] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485
kern :info : [ 2.797411] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ 2.797696] hub 1-5:1.0: USB hub found
kern :info : [ 2.797768] hub 1-5:1.0: 4 ports detected
kern :notice: [ 2.884676] random: nonblocking pool is initialized
kern :info : [ 2.900079] usb 1-6: new high-speed USB device number 5 using ehci-pci
kern :info : [ 3.019649] usb 1-6: New USB device found, idVendor=17ef, idProduct=4807
kern :info : [ 3.019662] usb 1-6: New USB device strings: Mfr=1, Product=0, SerialNumber=0
kern :info : [ 3.019674] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
kern :info : [ 3.202726] fbcondecor: switched decor state to 'off' on console 0
kern :info : [ 3.330067] usb 2-4: new high-speed USB device number 2 using ehci-pci
kern :info : [ 3.339788] fbcondecor: console 0 using theme 'livedvd-12.0'
kern :info : [ 3.384263] fbcondecor: switched decor state to 'on' on console 0
kern :info : [ 3.506783] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [ 3.509854] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ 3.512877] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [ 3.515919] usb 2-4: Manufacturer: Ericsson
kern :info : [ 3.519000] usb 2-4: SerialNumber: 3541430256485280
kern :info : [ 3.545457] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [ 3.554371] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [ 3.563110] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [ 3.567235] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [ 3.573138] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [ 3.580782] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :info : [ 3.791049] usb 4-1: new full-speed USB device number 2 using uhci_hcd
daemon:info : [ 3.831670] systemd-udevd[1741]: starting version 215
kern :info : [ 3.949564] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
kern :info : [ 3.949567] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
kern :info : [ 3.949569] usb 4-1: Product: Fingerprint Sensor
kern :info : [ 4.158034] usb 4-2: new full-speed USB device number 3 using uhci_hcd
kern :info : [ 4.317374] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
kern :info : [ 4.317379] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kern :info : [ 4.317382] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
kern :info : [ 4.317385] usb 4-2: Manufacturer: Lenovo Computer Corp
kern :info : [ 5.125256] Bluetooth: Core ver 2.19
kern :info : [ 5.125273] NET: Registered protocol family 31
kern :info : [ 5.125275] Bluetooth: HCI device and connection manager initialized
kern :info : [ 5.125284] Bluetooth: HCI socket layer initialized
kern :info : [ 5.125286] Bluetooth: L2CAP socket layer initialized
kern :info : [ 5.125292] Bluetooth: SCO socket layer initialized
kern :info : [ 5.156762] usbcore: registered new interface driver btusb
kern :info : [ 5.411317] uvcvideo: Found UVC 1.00 device <unnamed> (17ef:4807)
kern :info : [ 5.412744] input: UVC Camera (17ef:4807) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14
kern :info : [ 5.412901] usbcore: registered new interface driver uvcvideo
kern :info : [ 5.412903] USB Video Class driver (1.1.1)
kern :info : [ 5.606226] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
kern :info : [ 5.628825] fbcondecor: switched decor state to 'off' on console 0
kern :info : [ 5.732514] fbcondecor: console 0 using theme 'livedvd-12.0'
kern :info : [ 5.778248] fbcondecor: switched decor state to 'on' on console 0
kern :info : [ 6.044388] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
kern :info : [ 7.202900] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
kern :info : [ 7.440884] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
kern :info : [ 15.203690] EXT4-fs (sda3): re-mounted. Opts: discard
kern :info : [ 15.331140] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k SSFS
kern :info : [ 15.358564] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
kern :notice: [ 15.361088] XFS (sda6): Mounting V4 Filesystem
kern :info : [ 15.406948] XFS (sda6): Ending clean mount
kern :notice: [ 15.425441] XFS (dm-0): Mounting V4 Filesystem
kern :info : [ 15.485978] XFS (dm-0): Ending clean mount
kern :info : [ 15.977126] fbcondecor: switched decor state to 'off' on console 0
kern :info : [ 16.076460] fbcondecor: console 0 using theme 'livedvd-12.0'
kern :info : [ 16.121620] fbcondecor: switched decor state to 'on' on console 0
kern :debug : [ 17.194471] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
kern :debug : [ 17.295891] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
kern :info : [ 17.296088] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [ 19.484027] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [ 19.484197] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [ 242.924070] thinkpad_ec: thinkpad_ec 0.41 loaded.
kern :info : [ 242.924657] tp_smapi 0.41 loading...
kern :info : [ 242.924833] tp_smapi successfully loaded (smapi_port=0xb2).
kern :info : [ 242.929937] hdaps: LENOVO ThinkPad T500 detected, setting orientation 1
kern :debug : [ 242.930025] hdaps: initial mode latch is 0x05
kern :debug : [ 242.930202] hdaps: setting ec_rate=250, filter_order=2
kern :info : [ 242.930423] hdaps: device successfully initialized.
kern :info : [ 242.930493] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input15
kern :info : [ 242.930761] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input16
kern :info : [ 242.931350] hdaps: driver successfully loaded.
kern :info : [ 243.534995] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
kern :info : [ 246.236986] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [ 1075.453869] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [ 1075.454107] usb 4-2: USB disconnect, device number 3
kern :info : [ 1075.457039] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [ 1075.590019] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [ 1075.593505] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [ 1075.618068] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [ 1075.936541] cfg80211: Calling CRDA to update world regulatory domain
kern :info : [ 1075.945448] cfg80211: World regulatory domain updated:
kern :info : [ 1075.945451] cfg80211: DFS Master region: unset
kern :info : [ 1075.945452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [ 1075.945454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [ 1075.945456] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [ 1075.945457] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [ 1075.945459] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [ 1075.945460] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [ 1117.986580] wlan0: authenticate with c0:25:06:47:03:83
kern :info : [ 1117.990249] wlan0: send auth to c0:25:06:47:03:83 (try 1/3)
kern :info : [ 1117.992570] wlan0: authenticated
kern :info : [ 1117.993047] wlan0: associate with c0:25:06:47:03:83 (try 1/3)
kern :info : [ 1118.018895] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1)
kern :info : [ 1118.027690] wlan0: associated
kern :info : [ 1118.027735] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
kern :info : [ 1118.027851] cfg80211: Calling CRDA for country: DE
kern :info : [ 1118.033325] cfg80211: Regulatory domain changed to country: DE
kern :info : [ 1118.033332] cfg80211: DFS Master region: unset
kern :info : [ 1118.033337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [ 1118.033344] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [ 1118.033350] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [ 1118.033355] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
kern :info : [ 1118.033361] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
kern :info : [ 1118.033366] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
kern :warn : [ 1148.336252] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [ 1148.336293] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [ 1148.336448] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [ 1148.336495] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [ 1148.336499] ata1.00: configured for UDMA/133
kern :info : [ 1148.336506] ata1: EH complete
kern :info : [ 1148.351958] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [ 1148.355926] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [ 1157.113161] traps: notification-da[6784] trap int3 ip:7fde6099d84e sp:7fff418394b0 error:0
kern :warn : [ 1858.707112] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
kern :warn : [ 4652.336525] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [ 4652.336557] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [ 4652.336566] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [ 4652.336578] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [ 4652.336590] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [ 4652.336601] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [ 4652.336627] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [ 4652.336633] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [ 4652.336647] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [ 4652.336652] i915 0000:00:02.0: using default PCI settings
kern :warn : [ 4652.336665] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [ 4652.336670] pci 0000:00:02.1: using default PCI settings
kern :warn : [ 4652.336683] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [ 4652.336687] pci 0000:00:03.0: using default PCI settings
kern :warn : [ 4652.336701] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [ 4652.336706] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [ 4652.336723] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [ 4652.336728] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [ 4652.336745] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [ 4652.336749] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [ 4652.336766] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [ 4652.336771] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [ 4652.336787] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [ 4652.336792] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [ 4652.336809] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [ 4652.336818] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [ 4652.336827] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [ 4652.336847] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [ 4652.336856] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [ 4652.336873] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [ 4652.336882] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [ 4652.336890] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [ 4652.336899] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [ 4652.336903] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [ 4652.336920] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [ 4652.336925] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [ 4652.336941] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [ 4652.336946] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [ 4652.336962] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [ 4652.336967] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [ 4652.336984] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [ 4652.336988] pci 0000:00:1e.0: using default PCI settings
kern :warn : [ 4652.337041] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [ 4652.337047] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [ 4652.337069] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [ 4652.337075] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [ 4652.337096] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [ 4652.337101] r592 0000:15:00.4: using default PCI settings
kern :warn : [ 4652.337122] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [ 4652.337126] pci 0000:15:00.5: using default PCI settings
kern :warn : [ 4652.337152] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [ 4652.337163] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [ 4652.337188] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [ 4652.337199] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [ 4652.337222] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [ 4652.337231] i801_smbus 0000:00:1f.3: using default PCI settings
kern :warn : [ 7218.484498] perf interrupt took too long (5010 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
kern :info : [16314.106676] traps: notification-da[7031] trap int3 ip:7f1e397eb84e sp:7fff39b8f5c0 error:0
kern :warn : [50014.755517] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [50014.755549] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [50014.755558] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [50014.755570] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [50014.755583] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [50014.755594] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [50014.755619] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [50014.755625] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [50014.755639] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [50014.755644] i915 0000:00:02.0: using default PCI settings
kern :warn : [50014.755657] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [50014.755663] pci 0000:00:02.1: using default PCI settings
kern :warn : [50014.755676] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [50014.755681] pci 0000:00:03.0: using default PCI settings
kern :warn : [50014.755695] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [50014.755699] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [50014.755716] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [50014.755722] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [50014.755738] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [50014.755743] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [50014.755759] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [50014.755764] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [50014.755781] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [50014.755786] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [50014.755803] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [50014.755812] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [50014.755821] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [50014.755842] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [50014.755850] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [50014.755867] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [50014.755876] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [50014.755885] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [50014.755894] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [50014.755898] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [50014.755915] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [50014.755919] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [50014.755936] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [50014.755941] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [50014.755957] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [50014.755962] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [50014.755979] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [50014.755983] pci 0000:00:1e.0: using default PCI settings
kern :warn : [50014.756042] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [50014.756048] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [50014.756070] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [50014.756075] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [50014.756100] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [50014.756104] r592 0000:15:00.4: using default PCI settings
kern :warn : [50014.756127] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [50014.756138] pci 0000:15:00.5: using default PCI settings
kern :warn : [50014.756162] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [50014.756172] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [50014.756197] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [50014.756210] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [50014.756234] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [50014.756243] i801_smbus 0000:00:1f.3: using default PCI settings
kern :warn : [54234.679194] acpi PNP0401:00: Cannot transition to non-D0 state from D3
kern :info : [54234.679284] ACPI: \_SB_.GDCK: undocking
kern :info : [54234.697295] usb 1-5: USB disconnect, device number 4
kern :info : [54235.553146] e1000e: eth0 NIC Link is Down
kern :info : [54235.651190] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [54236.094254] thinkpad_acpi: EC reports that Thermal Table has changed
kern :warn : [54236.094811] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [54236.094824] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [54236.094827] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [54236.094832] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [54236.094838] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [54236.094843] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [54236.094853] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [54236.094855] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [54236.094859] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [54236.094861] i915 0000:00:02.0: using default PCI settings
kern :warn : [54236.094865] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [54236.094866] pci 0000:00:02.1: using default PCI settings
kern :warn : [54236.094871] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [54236.094872] pci 0000:00:03.0: using default PCI settings
kern :warn : [54236.094877] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [54236.094878] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [54236.094886] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [54236.094888] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [54236.094895] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [54236.094896] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [54236.094904] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [54236.094905] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [54236.094913] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [54236.094914] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [54236.094922] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [54236.094925] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [54236.094928] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [54236.094937] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [54236.094940] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [54236.094947] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [54236.094950] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [54236.094952] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [54236.094955] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [54236.094956] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [54236.094964] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [54236.094965] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [54236.094973] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [54236.094974] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [54236.094981] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [54236.094983] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [54236.094990] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [54236.094992] pci 0000:00:1e.0: using default PCI settings
kern :warn : [54236.095016] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [54236.095017] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [54236.095028] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [54236.095029] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [54236.095040] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [54236.095041] r592 0000:15:00.4: using default PCI settings
kern :warn : [54236.095051] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [54236.095052] pci 0000:15:00.5: using default PCI settings
kern :warn : [54236.095062] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [54236.095063] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [54236.095073] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [54236.095074] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [54236.095082] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [54236.095083] i801_smbus 0000:00:1f.3: using default PCI settings
kern :info : [54236.298476] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [54236.375802] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [54236.920752] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54237.725744] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54238.528419] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54239.330455] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54240.132620] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54240.935172] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54241.737625] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54242.539456] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54243.341858] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [54244.143277] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :info : [54244.329942] PM: Syncing filesystems ... done.
kern :notice: [54244.374084] Freezing user space processes ... (elapsed 0.001 seconds) done.
kern :notice: [54244.375616] Freezing remaining freezable tasks ... (elapsed 6.545 seconds) done.
kern :notice: [54250.921169] Suspending console(s) (use no_console_suspend to debug)
kern :debug : [54250.921622] hdaps: setting ec_rate=0, filter_order=1
kern :info : [54251.122720] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING)
kern :notice: [54251.123289] sd 0:0:0:0: [sda] Synchronizing SCSI cache
kern :notice: [54251.124560] sd 0:0:0:0: [sda] Stopping disk
kern :info : [54251.133444] parport_pc 00:06: disabled
kern :info : [54251.133498] serial 00:05: disabled
kern :info : [54251.133650] cfg80211: Calling CRDA to update world regulatory domain
kern :info : [54251.133822] serial 00:05: System wakeup disabled by ACPI
kern :info : [54251.481134] PM: suspend of devices complete after 559.597 msecs
kern :info : [54251.492094] PM: late suspend of devices complete after 10.955 msecs
kern :info : [54251.492761] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
kern :info : [54251.492839] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
kern :info : [54251.493031] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
kern :info : [54251.493057] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
kern :info : [54251.493127] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
kern :info : [54251.504028] PM: noirq suspend of devices complete after 11.931 msecs
kern :info : [54251.504649] ACPI: Preparing to enter system sleep state S3
kern :info : [54251.508541] PM: Saving platform NVS memory
kern :info : [54251.509528] Disabling non-boot CPUs ...
kern :info : [54251.510694] kvm: disabling virtualization on CPU1
kern :info : [54251.510838] smpboot: CPU 1 is now offline
kern :info : [54251.511101] ACPI: Low-level resume complete
kern :info : [54251.511101] PM: Restoring platform NVS memory
kern :info : [54251.511101] Enabling non-boot CPUs ...
kern :info : [54251.511101] x86: Booting SMP configuration:
kern :info : [54251.511101] smpboot: Booting Node 0 Processor 1 APIC 0x1
kern :info : [54251.510694] Disabled fast string operations
kern :info : [54251.510694] kvm: enabling virtualization on CPU1
kern :info : [54251.527720] CPU1 is up
kern :info : [54251.530559] ACPI: Waking up from system sleep state S3
kern :info : [54251.555414] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
kern :info : [54251.555492] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
kern :info : [54251.555876] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
kern :info : [54251.566095] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :info : [54251.566152] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :info : [54251.567525] PM: noirq resume of devices complete after 12.279 msecs
kern :info : [54251.567763] PM: early resume of devices complete after 0.201 msecs
kern :warn : [54251.594318] usb usb3: root hub lost power or was reset
kern :warn : [54251.594398] usb usb4: root hub lost power or was reset
kern :warn : [54251.594476] usb usb5: root hub lost power or was reset
kern :debug : [54251.594618] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kern :warn : [54251.594820] usb usb6: root hub lost power or was reset
kern :warn : [54251.594898] usb usb7: root hub lost power or was reset
kern :warn : [54251.594976] usb usb8: root hub lost power or was reset
kern :warn : [54251.595137] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :warn : [54251.596180] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :notice: [54251.596982] sd 0:0:0:0: [sda] Starting disk
kern :debug : [54251.647175] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :err : [54251.683106] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 (valid? 1) head 8163e50c tail 00000000 start 00042000 [expected 00042000]
kern :err : [54251.683109] [drm:__i915_drm_thaw] *ERROR* failed to re-initialize GPU, declaring wedged!
kern :err : [54251.695111] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
kern :err : [54251.695113] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
kern :err : [54251.695115] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
kern :err : [54251.695117] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00
kern :info : [54251.695432] serial 00:05: activated
kern :info : [54251.695672] parport_pc 00:06: activated
kern :info : [54251.711137] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [54251.714099] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [54251.901105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :info : [54251.901136] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :debug : [54251.903522] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [54251.904197] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [54251.904199] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [54251.904202] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [54251.904375] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [54251.904472] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :debug : [54251.904562] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [54251.904565] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :debug : [54251.905818] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [54251.905820] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [54251.905821] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [54251.905993] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [54251.906078] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [54251.906082] ata1.00: configured for UDMA/133
kern :debug : [54251.908669] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [54251.909724] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [54251.909726] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [54251.910766] ata2.00: configured for UDMA/100
kern :info : [54251.919122] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
kern :info : [54251.919124] usb 1-6: reset high-speed USB device number 5 using ehci-pci
kern :debug : [54252.056016] hdaps: initial mode latch is 0x05
kern :debug : [54252.056146] hdaps: setting ec_rate=250, filter_order=2
kern :info : [54252.056372] PM: resume of devices complete after 488.606 msecs
kern :notice: [54252.056660] Restarting tasks ...
kern :info : [54252.061373] usb 2-4: USB disconnect, device number 2
kern :info : [54252.061806] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
kern :info : [54252.072478] cfg80211: World regulatory domain updated:
kern :info : [54252.072481] cfg80211: DFS Master region: unset
kern :info : [54252.072482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [54252.072485] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [54252.072487] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [54252.072488] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [54252.072490] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [54252.072491] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :notice: [54252.084709] done.
kern :info : [54252.106556] video LNXVIDEO:00: Restoring backlight state
kern :notice: [54252.149038] firewire_core 0000:15:00.1: rediscovered device fw0
kern :info : [54252.684343] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [54252.867361] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [54252.895616] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [54252.895657] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [54252.895804] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [54252.895840] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [54252.895843] ata1.00: configured for UDMA/133
kern :info : [54252.895852] ata1: EH complete
kern :notice: [54252.935985] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [54255.155131] usb 6-2: new full-speed USB device number 2 using uhci_hcd
kern :info : [54255.303151] usb 6-2: New USB device found, idVendor=067b, idProduct=2303
kern :info : [54255.303155] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kern :info : [54255.303159] usb 6-2: Product: USB-Serial Controller
kern :info : [54255.303161] usb 6-2: Manufacturer: Prolific Technology Inc.
kern :info : [54255.503909] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [54255.507705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [54255.546288] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [54255.556262] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [54255.715120] usbcore: registered new interface driver usbserial
kern :info : [54255.715134] usbcore: registered new interface driver usbserial_generic
kern :info : [54255.715144] usbserial: USB Serial support registered for generic
kern :info : [54255.716124] usbcore: registered new interface driver pl2303
kern :info : [54255.716135] usbserial: USB Serial support registered for pl2303
kern :info : [54255.716154] pl2303 6-2:1.0: pl2303 converter detected
kern :info : [54255.729244] usb 6-2: pl2303 converter now attached to ttyUSB0
kern :info : [54256.473923] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [54256.474034] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [54256.474076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [54256.595099] usb 2-4: new high-speed USB device number 4 using ehci-pci
kern :info : [54257.516915] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [54257.516921] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [54257.516924] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [54257.516927] usb 2-4: Manufacturer: Ericsson
kern :info : [54257.516930] usb 2-4: SerialNumber: 3541430256485280
kern :info : [54257.525021] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [54257.556264] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [54257.570096] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [54257.577235] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [54257.594396] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [54257.603762] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :info : [54258.934440] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [54259.057503] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
kern :info : [54259.062664] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [54259.122600] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [54259.922793] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :warn : [54259.980329] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [54259.980448] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [54259.980601] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [54259.980648] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [54259.980651] ata1.00: configured for UDMA/133
kern :info : [54259.980659] ata1: EH complete
kern :notice: [54259.980781] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [54259.988324] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [54259.993246] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [54260.703932] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [54260.704053] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [54260.704114] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [54304.737395] e1000e: eth0 NIC Link is Down
kern :info : [54304.745861] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :debug : [54309.265625] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :debug : [54309.366147] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :info : [54309.366295] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [54309.369072] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [54309.372058] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [54309.395515] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [54310.884979] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [54310.885100] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [54310.885160] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [66127.680161] e1000e: eth0 NIC Link is Down
kern :info : [66127.779382] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [66148.632112] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Link Status Change
kern :info : [66150.338896] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [66150.339016] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [66150.339049] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :err : [67382.612204] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.614180] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.615180] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.616175] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.617162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.618165] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.619160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.620156] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.621151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.622152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.623158] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.624173] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.625162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.626162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.627156] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.628166] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.629162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.630160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.631153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.632148] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.633160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.634149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.635164] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.636149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.637162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.638144] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.639149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.640149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.641161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.642160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.643162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.644158] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.645175] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.646162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.647143] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.648152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.649162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.650151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.651150] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.652161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.653151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.654145] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.655161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.656157] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.657172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.658161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.659173] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.660172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.661176] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.662173] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.663171] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.664181] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.665163] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.666160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.667153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.668151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.669144] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.670149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.671138] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.672139] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.673145] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.674161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.675161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.676153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.677161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.678151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.679152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.680144] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.681150] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.682164] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.683160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.684172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.685150] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.686154] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.687149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.688147] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.689167] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.690175] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.691161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.692165] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.693172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.694161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.695163] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.696162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.697151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.698153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.699160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.700152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.701151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.702159] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.703151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.704024] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.704168] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :info : [67382.704263] usb 6-2: USB disconnect, device number 2
kern :err : [67382.705153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
kern :err : [67382.705161] pl2303 ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19
kern :err : [67382.705226] pl2303 ttyUSB0: pl2303_set_control_lines - failed: -19
kern :info : [67382.705445] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
kern :info : [67382.705467] pl2303 6-2:1.0: device disconnected
kern :info : [67930.762147] e1000e: eth0 NIC Link is Down
kern :info : [67930.861441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [67934.907102] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Link Status Change
kern :info : [67937.491894] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [67937.492021] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [67937.492069] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [74702.112161] traps: notification-da[20524] trap int3 ip:7f9aafef884e sp:7fff10edd930 error:0
kern :info : [79767.021799] conftest[29498]: segfault at ff803f6c ip 00000000f771fdfd sp 00000000ff803f40 error 6 in ld-2.19.so[f770a000+20000]
kern :info : [80943.265361] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [80944.444563] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [80944.675544] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [80944.769082] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [80945.500761] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [80945.500898] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [80945.501048] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [80945.501088] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [80945.501092] ata1.00: configured for UDMA/133
kern :info : [80945.501101] ata1: EH complete
kern :notice: [80945.501219] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [80945.509911] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [80945.520763] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [80945.855971] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [80945.856082] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [80945.856118] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [80946.901134] e1000e: eth0 NIC Link is Down
kern :info : [80947.067555] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [80947.237095] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Link Status Change
kern :info : [80953.681049] PM: Syncing filesystems ... done.
kern :notice: [80953.873618] Freezing user space processes ... (elapsed 0.023 seconds) done.
kern :notice: [80953.897551] Freezing remaining freezable tasks ... (elapsed 2.579 seconds) done.
kern :notice: [80956.476982] Suspending console(s) (use no_console_suspend to debug)
kern :debug : [80956.477535] hdaps: setting ec_rate=0, filter_order=1
kern :notice: [80956.681491] sd 0:0:0:0: [sda] Stopping disk
kern :info : [80956.681950] parport_pc 00:06: disabled
kern :info : [80956.682016] serial 00:05: disabled
kern :info : [80956.682439] serial 00:05: System wakeup disabled by ACPI
kern :info : [80957.454140] PM: suspend of devices complete after 976.746 msecs
kern :info : [80957.465106] PM: late suspend of devices complete after 10.962 msecs
kern :info : [80957.465774] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
kern :info : [80957.465863] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
kern :info : [80957.466105] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
kern :info : [80957.466179] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
kern :info : [80957.466230] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
kern :info : [80957.477036] PM: noirq suspend of devices complete after 11.927 msecs
kern :info : [80957.477663] ACPI: Preparing to enter system sleep state S3
kern :info : [80957.481681] PM: Saving platform NVS memory
kern :info : [80957.482655] Disabling non-boot CPUs ...
kern :info : [80957.483822] kvm: disabling virtualization on CPU1
kern :info : [80957.483966] smpboot: CPU 1 is now offline
kern :info : [80957.484213] ACPI: Low-level resume complete
kern :info : [80957.484213] PM: Restoring platform NVS memory
kern :info : [80957.484213] Enabling non-boot CPUs ...
kern :info : [80957.484213] x86: Booting SMP configuration:
kern :info : [80957.484213] smpboot: Booting Node 0 Processor 1 APIC 0x1
kern :info : [80957.483822] Disabled fast string operations
kern :info : [80957.483822] kvm: enabling virtualization on CPU1
kern :info : [80957.504353] CPU1 is up
kern :info : [80957.507211] ACPI: Waking up from system sleep state S3
kern :info : [80957.528245] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [80957.533957] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
kern :info : [80957.534036] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
kern :info : [80957.534437] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
kern :info : [80957.546113] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :info : [80957.546197] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :info : [80957.546677] PM: noirq resume of devices complete after 12.869 msecs
kern :info : [80957.546888] PM: early resume of devices complete after 0.175 msecs
kern :warn : [80957.549132] usb usb5: root hub lost power or was reset
kern :warn : [80957.549316] usb usb4: root hub lost power or was reset
kern :warn : [80957.549394] usb usb3: root hub lost power or was reset
kern :debug : [80957.549571] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kern :warn : [80957.549861] usb usb6: root hub lost power or was reset
kern :warn : [80957.550386] usb usb7: root hub lost power or was reset
kern :warn : [80957.550465] usb usb8: root hub lost power or was reset
kern :warn : [80957.550624] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :warn : [80957.551670] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :notice: [80957.552505] sd 0:0:0:0: [sda] Starting disk
kern :debug : [80957.622212] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :err : [80957.650069] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
kern :err : [80957.650071] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
kern :err : [80957.650080] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
kern :err : [80957.650083] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00
kern :info : [80957.650382] serial 00:05: activated
kern :info : [80957.650614] parport_pc 00:06: activated
kern :info : [80957.650755] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [80957.653727] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [80957.856073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :info : [80957.856103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :debug : [80957.858571] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [80957.859135] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [80957.859138] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [80957.859140] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [80957.859342] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [80957.859449] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :debug : [80957.859708] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [80957.859710] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :debug : [80957.860804] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [80957.860806] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [80957.860808] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [80957.860994] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [80957.861094] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [80957.861097] ata1.00: configured for UDMA/133
kern :debug : [80957.863744] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [80957.864771] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [80957.864773] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [80957.865770] ata2.00: configured for UDMA/100
kern :info : [80957.867063] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
kern :info : [80957.867067] usb 1-6: reset high-speed USB device number 5 using ehci-pci
kern :notice: [80957.872262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :debug : [80958.010071] hdaps: initial mode latch is 0x05
kern :debug : [80958.010214] hdaps: setting ec_rate=250, filter_order=2
kern :info : [80958.010442] PM: resume of devices complete after 463.550 msecs
kern :notice: [80958.010645] Restarting tasks ...
kern :info : [80958.010669] ACPI: \_SB_.GDCK: docking
kern :info : [80958.026265] usb 2-4: USB disconnect, device number 4
kern :info : [80958.030660] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
kern :notice: [80958.039154] done.
kern :info : [80958.068889] video LNXVIDEO:00: Restoring backlight state
kern :notice: [80958.104034] firewire_core 0000:15:00.1: rediscovered device fw0
kern :info : [80958.243062] usb 1-5: new high-speed USB device number 6 using ehci-pci
kern :info : [80958.357313] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485
kern :info : [80958.357317] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [80958.357588] hub 1-5:1.0: USB hub found
kern :info : [80958.357682] hub 1-5:1.0: 4 ports detected
kern :info : [80958.727849] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
kern :info : [80958.767047] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [80958.889314] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :warn : [80960.445382] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [80960.445424] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [80960.445571] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [80960.445614] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [80960.445617] ata1.00: configured for UDMA/133
kern :info : [80960.445625] ata1: EH complete
kern :info : [80960.456641] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [80960.461061] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [80960.947895] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [80960.948045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [80962.593033] usb 2-4: new high-speed USB device number 5 using ehci-pci
kern :info : [80963.503565] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [80963.503569] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [80963.503571] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [80963.503573] usb 2-4: Manufacturer: Ericsson
kern :info : [80963.503574] usb 2-4: SerialNumber: 3541430256485280
kern :info : [80963.516084] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [80963.536457] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [80963.547289] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [80963.553951] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [80963.560128] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [80963.569820] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :info : [81029.484135] e1000e: eth0 NIC Link is Down
kern :debug : [81033.592237] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :debug : [81033.693073] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :info : [81033.693218] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [81033.695722] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [81033.698965] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [81033.726610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [81035.883894] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [81035.884050] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [81043.005729] wlan0: authenticate with c0:25:06:47:03:83
kern :info : [81043.008582] wlan0: send auth to c0:25:06:47:03:83 (try 1/3)
kern :info : [81043.013542] wlan0: authenticated
kern :info : [81043.014272] wlan0: associate with c0:25:06:47:03:83 (try 1/3)
kern :info : [81043.032681] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1)
kern :info : [81043.040201] wlan0: associated
kern :info : [81043.040240] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
kern :info : [81043.040299] cfg80211: Calling CRDA for country: DE
kern :info : [81043.045746] cfg80211: Regulatory domain changed to country: DE
kern :info : [81043.045750] cfg80211: DFS Master region: unset
kern :info : [81043.045751] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [81043.045754] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [81043.045756] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [81043.045757] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
kern :info : [81043.045759] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
kern :info : [81043.045760] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
kern :info : [144263.112148] traps: notification-da[7267] trap int3 ip:7f718e47e84e sp:7fff3b66fa90 error:0
kern :info : [148002.064079] traps: notification-da[7647] trap int3 ip:7f7bf128984e sp:7ffff8a835f0 error:0
kern :info : [150453.113049] traps: notification-da[7878] trap int3 ip:7f73b597384e sp:7ffff5841630 error:0
kern :warn : [187701.407482] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [187701.407516] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [187701.407524] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [187701.407536] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [187701.407548] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [187701.407560] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [187701.407586] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [187701.407592] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [187701.407606] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [187701.407611] i915 0000:00:02.0: using default PCI settings
kern :warn : [187701.407625] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [187701.407630] pci 0000:00:02.1: using default PCI settings
kern :warn : [187701.407643] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [187701.407648] pci 0000:00:03.0: using default PCI settings
kern :warn : [187701.407663] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [187701.407668] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [187701.407684] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [187701.407690] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [187701.407706] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [187701.407711] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [187701.407728] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [187701.407733] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [187701.407750] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [187701.407755] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [187701.407772] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [187701.407781] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [187701.407790] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [187701.407811] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [187701.407820] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [187701.407837] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [187701.407846] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [187701.407854] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [187701.407863] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [187701.407868] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [187701.407885] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [187701.407889] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [187701.407906] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [187701.407911] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [187701.407927] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [187701.407932] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [187701.407948] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [187701.407953] pci 0000:00:1e.0: using default PCI settings
kern :warn : [187701.407981] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [187701.407985] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [187701.408037] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [187701.408043] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [187701.408066] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [187701.408071] r592 0000:15:00.4: using default PCI settings
kern :warn : [187701.408095] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [187701.408100] pci 0000:15:00.5: using default PCI settings
kern :warn : [187701.408120] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [187701.408130] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [187701.408158] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [187701.408171] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [187701.408196] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [187701.408207] i801_smbus 0000:00:1f.3: using default PCI settings
kern :warn : [232007.371430] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [232007.371464] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [232007.371473] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [232007.371485] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [232007.371497] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [232007.371509] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [232007.371536] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [232007.371541] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [232007.371556] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [232007.371561] i915 0000:00:02.0: using default PCI settings
kern :warn : [232007.371574] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [232007.371579] pci 0000:00:02.1: using default PCI settings
kern :warn : [232007.371592] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [232007.371597] pci 0000:00:03.0: using default PCI settings
kern :warn : [232007.371612] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [232007.371616] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [232007.371633] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [232007.371638] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [232007.371655] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [232007.371660] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [232007.371677] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [232007.371681] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [232007.371698] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [232007.371703] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [232007.371720] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [232007.371730] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [232007.371739] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [232007.371760] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [232007.371769] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [232007.371786] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [232007.371795] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [232007.371804] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [232007.371813] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [232007.371818] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [232007.371835] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [232007.371840] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [232007.371856] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [232007.371861] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [232007.371878] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [232007.371883] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [232007.371900] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [232007.371905] pci 0000:00:1e.0: using default PCI settings
kern :warn : [232007.371932] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [232007.371937] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [232007.371958] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [232007.371963] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [232007.371984] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [232007.371989] r592 0000:15:00.4: using default PCI settings
kern :warn : [232007.372037] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [232007.372043] pci 0000:15:00.5: using default PCI settings
kern :warn : [232007.372063] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [232007.372067] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [232007.372087] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [232007.372092] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [232007.372110] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [232007.372114] i801_smbus 0000:00:1f.3: using default PCI settings
kern :warn : [244656.599159] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [244656.599173] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [244656.599176] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [244656.599181] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [244656.599187] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [244656.599192] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [244656.599204] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [244656.599206] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [244656.599210] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [244656.599212] i915 0000:00:02.0: using default PCI settings
kern :warn : [244656.599216] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [244656.599218] pci 0000:00:02.1: using default PCI settings
kern :warn : [244656.599222] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [244656.599223] pci 0000:00:03.0: using default PCI settings
kern :warn : [244656.599228] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [244656.599230] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [244656.599237] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [244656.599239] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [244656.599246] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [244656.599248] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [244656.599255] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [244656.599257] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [244656.599264] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [244656.599266] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [244656.599273] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [244656.599276] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [244656.599279] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [244656.599288] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [244656.599291] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [244656.599299] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [244656.599301] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [244656.599304] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [244656.599307] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [244656.599308] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [244656.599315] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [244656.599317] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [244656.599324] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [244656.599326] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [244656.599333] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [244656.599335] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [244656.599342] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [244656.599344] pci 0000:00:1e.0: using default PCI settings
kern :warn : [244656.599357] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [244656.599358] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [244656.599368] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [244656.599370] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [244656.599380] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [244656.599382] r592 0000:15:00.4: using default PCI settings
kern :warn : [244656.599392] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [244656.599393] pci 0000:15:00.5: using default PCI settings
kern :warn : [244656.599403] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [244656.599404] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [244656.599414] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [244656.599415] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [244656.599423] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [244656.599424] i801_smbus 0000:00:1f.3: using default PCI settings
kern :info : [245736.716159] usb 1-1: new high-speed USB device number 7 using ehci-pci
kern :err : [245737.221111] usb 1-1: device not accepting address 7, error -32
kern :info : [245737.323183] usb 1-1: new high-speed USB device number 8 using ehci-pci
kern :info : [245737.443285] usb 1-1: New USB device found, idVendor=1949, idProduct=0004
kern :info : [245737.443293] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [245737.443300] usb 1-1: Product: Amazon Kindle
kern :info : [245737.443305] usb 1-1: Manufacturer: Amazon
kern :info : [245737.443310] usb 1-1: SerialNumber: 90D42201423308PR
kern :info : [245737.451137] usb-storage 1-1:1.0: USB Mass Storage device detected
kern :info : [245737.451389] scsi4 : usb-storage 1-1:1.0
kern :notice: [245738.453420] scsi 4:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
kern :notice: [245738.454773] sd 4:0:0:0: Attached scsi generic sg2 type 0
kern :notice: [245738.462404] sd 4:0:0:0: [sdb] Attached SCSI removable disk
kern :notice: [245744.615412] sd 4:0:0:0: [sdb] 2797568 512-byte logical blocks: (1.43 GB/1.33 GiB)
kern :notice: [245744.829545] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [245745.052302] sdb: sdb1
kern :info : [245792.112467] traps: notification-da[18576] trap int3 ip:7f90d03ec84e sp:7fff2d5d01d0 error:0
kern :info : [245956.017575] sdb: detected capacity change from 1432354816 to 0
kern :warn : [273579.398479] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [273579.398511] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [273579.398520] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [273579.398532] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [273579.398544] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [273579.398556] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [273579.398581] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [273579.398587] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [273579.398602] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [273579.398607] i915 0000:00:02.0: using default PCI settings
kern :warn : [273579.398621] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [273579.398626] pci 0000:00:02.1: using default PCI settings
kern :warn : [273579.398639] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [273579.398644] pci 0000:00:03.0: using default PCI settings
kern :warn : [273579.398658] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [273579.398663] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [273579.398680] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [273579.398685] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [273579.398702] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [273579.398707] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [273579.398723] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [273579.398728] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [273579.398745] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [273579.398750] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [273579.398767] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [273579.398777] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [273579.398786] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [273579.398806] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [273579.398815] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [273579.398832] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [273579.398841] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [273579.398850] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [273579.398859] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [273579.398864] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [273579.398880] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [273579.398885] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [273579.398902] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [273579.398907] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [273579.398923] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [273579.398928] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [273579.398945] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [273579.398950] pci 0000:00:1e.0: using default PCI settings
kern :warn : [273579.398977] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [273579.398982] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [273579.399040] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [273579.399046] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [273579.399071] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [273579.399076] r592 0000:15:00.4: using default PCI settings
kern :warn : [273579.399098] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [273579.399102] pci 0000:15:00.5: using default PCI settings
kern :warn : [273579.399123] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [273579.399128] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [273579.399150] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [273579.399162] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [273579.399185] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [273579.399198] i801_smbus 0000:00:1f.3: using default PCI settings
kern :warn : [299690.265498] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [299690.265532] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [299690.265542] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [299690.265555] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [299690.265567] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [299690.265580] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [299690.265608] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [299690.265614] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [299690.265628] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [299690.265633] i915 0000:00:02.0: using default PCI settings
kern :warn : [299690.265647] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [299690.265652] pci 0000:00:02.1: using default PCI settings
kern :warn : [299690.265665] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [299690.265670] pci 0000:00:03.0: using default PCI settings
kern :warn : [299690.265685] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [299690.265690] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [299690.265707] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [299690.265712] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [299690.265729] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [299690.265734] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [299690.265750] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [299690.265755] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [299690.265772] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [299690.265777] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [299690.265794] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [299690.265803] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [299690.265812] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [299690.265833] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [299690.265842] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [299690.265861] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [299690.265869] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [299690.265879] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [299690.265889] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [299690.265894] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [299690.265912] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [299690.265917] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [299690.265934] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [299690.265939] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [299690.265955] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [299690.265960] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [299690.265978] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [299690.265982] pci 0000:00:1e.0: using default PCI settings
kern :warn : [299690.266036] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [299690.266041] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [299690.266063] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [299690.266068] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [299690.266090] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [299690.266095] r592 0000:15:00.4: using default PCI settings
kern :warn : [299690.266116] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [299690.266121] pci 0000:15:00.5: using default PCI settings
kern :warn : [299690.266140] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [299690.266145] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [299690.266164] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [299690.266169] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [299690.266185] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [299690.266190] i801_smbus 0000:00:1f.3: using default PCI settings
kern :info : [300539.533256] usb 1-1: USB disconnect, device number 8
kern :warn : [300553.869074] acpi PNP0401:00: Cannot transition to non-D0 state from D3
kern :info : [300553.869163] ACPI: \_SB_.GDCK: undocking
kern :info : [300553.887263] usb 1-5: USB disconnect, device number 6
kern :info : [300555.012242] e1000e: eth0 NIC Link is Down
kern :info : [300555.137068] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [300555.555348] thinkpad_acpi: EC reports that Thermal Table has changed
kern :warn : [300555.555835] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [300555.555847] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [300555.555850] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [300555.555856] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [300555.555861] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [300555.555868] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [300555.555882] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [300555.555884] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [300555.555897] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [300555.555899] i915 0000:00:02.0: using default PCI settings
kern :warn : [300555.555903] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [300555.555905] pci 0000:00:02.1: using default PCI settings
kern :warn : [300555.555909] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [300555.555911] pci 0000:00:03.0: using default PCI settings
kern :warn : [300555.555916] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [300555.555918] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [300555.555934] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [300555.555935] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [300555.555951] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [300555.555952] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [300555.555962] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [300555.555963] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [300555.555972] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [300555.555973] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [300555.555981] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [300555.555984] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [300555.555987] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [300555.555996] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [300555.555999] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [300555.556019] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [300555.556022] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [300555.556025] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [300555.556027] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [300555.556029] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [300555.556037] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [300555.556038] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [300555.556046] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [300555.556047] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [300555.556055] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [300555.556057] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [300555.556065] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [300555.556066] pci 0000:00:1e.0: using default PCI settings
kern :warn : [300555.556080] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [300555.556082] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [300555.556093] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [300555.556094] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [300555.556105] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [300555.556106] r592 0000:15:00.4: using default PCI settings
kern :warn : [300555.556116] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [300555.556118] pci 0000:15:00.5: using default PCI settings
kern :warn : [300555.556128] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [300555.556130] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [300555.556141] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [300555.556142] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [300555.556151] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [300555.556152] i801_smbus 0000:00:1f.3: using default PCI settings
kern :info : [300556.214032] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [300556.295166] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [300556.454980] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [300557.380786] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [300558.182034] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [300558.993666] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [300559.795870] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [300560.597640] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [300561.399758] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [300562.201538] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :info : [300562.891411] PM: Syncing filesystems ... done.
kern :notice: [300562.961609] Freezing user space processes ...
kern :warn : [300563.002951] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :notice: [300563.009234] (elapsed 0.047 seconds) done.
kern :notice: [300563.009238] Freezing remaining freezable tasks ... (elapsed 5.698 seconds) done.
kern :notice: [300568.707845] Suspending console(s) (use no_console_suspend to debug)
kern :debug : [300568.708375] hdaps: setting ec_rate=0, filter_order=1
kern :info : [300568.905199] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING)
kern :notice: [300568.905942] sd 0:0:0:0: [sda] Synchronizing SCSI cache
kern :notice: [300568.907201] sd 0:0:0:0: [sda] Stopping disk
kern :info : [300568.911545] parport_pc 00:06: disabled
kern :info : [300568.911600] serial 00:05: disabled
kern :info : [300568.911818] cfg80211: Calling CRDA to update world regulatory domain
kern :info : [300568.911872] serial 00:05: System wakeup disabled by ACPI
kern :info : [300569.447157] PM: suspend of devices complete after 738.911 msecs
kern :info : [300569.458108] PM: late suspend of devices complete after 10.946 msecs
kern :info : [300569.458774] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
kern :info : [300569.458861] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
kern :info : [300569.459102] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
kern :info : [300569.459180] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
kern :info : [300569.459197] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
kern :info : [300569.470032] PM: noirq suspend of devices complete after 11.921 msecs
kern :info : [300569.470645] ACPI: Preparing to enter system sleep state S3
kern :info : [300569.474490] PM: Saving platform NVS memory
kern :info : [300569.475491] Disabling non-boot CPUs ...
kern :info : [300569.476660] kvm: disabling virtualization on CPU1
kern :info : [300569.476803] smpboot: CPU 1 is now offline
kern :info : [300569.477125] ACPI: Low-level resume complete
kern :info : [300569.477125] PM: Restoring platform NVS memory
kern :info : [300569.477125] Enabling non-boot CPUs ...
kern :info : [300569.477125] x86: Booting SMP configuration:
kern :info : [300569.477125] smpboot: Booting Node 0 Processor 1 APIC 0x1
kern :info : [300569.476660] Disabled fast string operations
kern :info : [300569.476660] kvm: enabling virtualization on CPU1
kern :info : [300569.493829] CPU1 is up
kern :info : [300569.496695] ACPI: Waking up from system sleep state S3
kern :info : [300569.521367] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
kern :info : [300569.521445] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
kern :info : [300569.521837] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
kern :info : [300569.532152] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :info : [300569.532154] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :info : [300569.534358] PM: noirq resume of devices complete after 13.190 msecs
kern :info : [300569.534585] PM: early resume of devices complete after 0.191 msecs
kern :warn : [300569.537161] usb usb3: root hub lost power or was reset
kern :warn : [300569.537241] usb usb4: root hub lost power or was reset
kern :warn : [300569.537324] usb usb5: root hub lost power or was reset
kern :debug : [300569.537466] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kern :warn : [300569.537714] usb usb6: root hub lost power or was reset
kern :warn : [300569.537791] usb usb7: root hub lost power or was reset
kern :warn : [300569.537867] usb usb8: root hub lost power or was reset
kern :warn : [300569.538456] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :warn : [300569.539490] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :notice: [300569.540372] sd 0:0:0:0: [sda] Starting disk
kern :debug : [300569.610261] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :err : [300569.638051] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
kern :err : [300569.638053] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
kern :err : [300569.638063] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
kern :err : [300569.638065] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00
kern :info : [300569.638385] serial 00:05: activated
kern :info : [300569.638625] parport_pc 00:06: activated
kern :info : [300569.638735] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [300569.641699] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [300569.844113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :info : [300569.844142] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :debug : [300569.846678] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [300569.847276] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [300569.847279] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [300569.847281] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [300569.847454] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [300569.847555] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :debug : [300569.847684] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [300569.847686] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :debug : [300569.848917] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [300569.848919] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [300569.848920] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [300569.849118] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [300569.849206] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [300569.849210] ata1.00: configured for UDMA/133
kern :debug : [300569.851801] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [300569.852869] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [300569.852871] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [300569.853855] ata2.00: configured for UDMA/100
kern :info : [300569.854050] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
kern :info : [300569.855130] usb 1-6: reset high-speed USB device number 5 using ehci-pci
kern :debug : [300569.997952] hdaps: initial mode latch is 0x05
kern :debug : [300569.998093] hdaps: setting ec_rate=250, filter_order=2
kern :info : [300569.998323] PM: resume of devices complete after 463.735 msecs
kern :notice: [300569.998569] Restarting tasks ...
kern :info : [300570.011037] usb 2-4: USB disconnect, device number 5
kern :info : [300570.013897] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
kern :notice: [300570.036184] done.
kern :info : [300570.051452] video LNXVIDEO:00: Restoring backlight state
kern :notice: [300570.092039] firewire_core 0000:15:00.1: rediscovered device fw0
kern :info : [300570.443398] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [300570.510728] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [300570.750683] cfg80211: World regulatory domain updated:
kern :info : [300570.750688] cfg80211: DFS Master region: unset
kern :info : [300570.750689] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [300570.750692] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [300570.750694] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [300570.750695] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [300570.750697] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [300570.750698] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [300574.604085] usb 2-4: new high-speed USB device number 6 using ehci-pci
kern :info : [300575.421763] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [300575.421768] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [300575.421772] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [300575.421775] usb 2-4: Manufacturer: Ericsson
kern :info : [300575.421777] usb 2-4: SerialNumber: 3541430256485280
kern :info : [300575.443608] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [300575.448925] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [300575.449034] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [300575.449071] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [300575.458120] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [300575.470111] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [300575.526617] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [300575.542119] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [300575.556109] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :warn : [300576.058246] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [300576.058328] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [300576.058512] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [300576.058578] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [300576.058583] ata1.00: configured for UDMA/133
kern :info : [300576.058593] ata1: EH complete
kern :notice: [300576.787146] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [300576.788200] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [300576.821384] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [300576.825927] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [300576.954029] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [300578.340375] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [300578.455418] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
kern :info : [300578.468703] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [300578.521652] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [300578.607163] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :warn : [300579.031373] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [300579.031449] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [300579.031608] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [300579.031651] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [300579.031654] ata1.00: configured for UDMA/133
kern :info : [300579.031661] ata1: EH complete
kern :notice: [300579.031793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [300579.039270] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [300579.046614] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [300580.356890] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [300580.357001] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [300580.357061] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [301137.119405] e1000e: eth0 NIC Link is Down
kern :debug : [301141.285679] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :debug : [301141.386199] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :info : [301141.386537] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [301141.394788] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [301141.397776] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [301141.421657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [301142.963026] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [301142.963147] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [301142.963201] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [311963.106954] traps: notification-da[5261] trap int3 ip:7f625399984e sp:7fff8c963480 error:0
kern :info : [312114.109364] traps: notification-da[5583] trap int3 ip:7f7138aa784e sp:7fff6bf0ed30 error:0
kern :info : [326979.436188] e1000e: eth0 NIC Link is Down
kern :info : [326979.561379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [326979.795303] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [326979.980084] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [326980.073832] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [326980.638532] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :info : [326980.963335] PM: Syncing filesystems ... done.
kern :notice: [326981.039618] Freezing user space processes ...
kern :warn : [326981.447354] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :notice: [326981.453170] (elapsed 0.413 seconds) done.
kern :notice: [326981.453183] Freezing remaining freezable tasks ... (elapsed 1.401 seconds) done.
kern :notice: [326982.854776] Suspending console(s) (use no_console_suspend to debug)
kern :debug : [326982.855361] hdaps: setting ec_rate=0, filter_order=1
kern :notice: [326983.057461] sd 0:0:0:0: [sda] Synchronizing SCSI cache
kern :info : [326983.058725] parport_pc 00:06: disabled
kern :info : [326983.058781] serial 00:05: disabled
kern :info : [326983.059141] serial 00:05: System wakeup disabled by ACPI
kern :notice: [326983.060398] sd 0:0:0:0: [sda] Stopping disk
kern :info : [326983.535161] PM: suspend of devices complete after 679.949 msecs
kern :info : [326983.546094] PM: late suspend of devices complete after 10.928 msecs
kern :info : [326983.546726] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
kern :info : [326983.546811] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
kern :info : [326983.547223] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
kern :info : [326983.547245] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
kern :info : [326983.547266] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
kern :info : [326983.558038] PM: noirq suspend of devices complete after 11.941 msecs
kern :info : [326983.558652] ACPI: Preparing to enter system sleep state S3
kern :info : [326983.562709] PM: Saving platform NVS memory
kern :info : [326983.563724] Disabling non-boot CPUs ...
kern :info : [326983.564889] kvm: disabling virtualization on CPU1
kern :info : [326983.565032] smpboot: CPU 1 is now offline
kern :info : [326983.565309] ACPI: Low-level resume complete
kern :info : [326983.565309] PM: Restoring platform NVS memory
kern :info : [326983.565309] Enabling non-boot CPUs ...
kern :info : [326983.565309] x86: Booting SMP configuration:
kern :info : [326983.565309] smpboot: Booting Node 0 Processor 1 APIC 0x1
kern :info : [326983.564889] Disabled fast string operations
kern :info : [326983.564889] kvm: enabling virtualization on CPU1
kern :info : [326983.585361] CPU1 is up
kern :info : [326983.588241] ACPI: Waking up from system sleep state S3
kern :info : [326983.609217] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [326983.614846] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
kern :info : [326983.614938] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
kern :info : [326983.615331] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
kern :info : [326983.625219] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :info : [326983.627144] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :info : [326983.627393] PM: noirq resume of devices complete after 12.750 msecs
kern :info : [326983.627684] PM: early resume of devices complete after 0.250 msecs
kern :warn : [326983.629877] usb usb3: root hub lost power or was reset
kern :warn : [326983.629958] usb usb4: root hub lost power or was reset
kern :warn : [326983.630048] usb usb5: root hub lost power or was reset
kern :debug : [326983.630191] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kern :warn : [326983.630500] usb usb6: root hub lost power or was reset
kern :warn : [326983.630578] usb usb7: root hub lost power or was reset
kern :warn : [326983.630655] usb usb8: root hub lost power or was reset
kern :warn : [326983.630880] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :warn : [326983.631942] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :notice: [326983.633299] sd 0:0:0:0: [sda] Starting disk
kern :debug : [326983.703209] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :err : [326983.731108] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
kern :err : [326983.731110] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
kern :err : [326983.731121] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
kern :err : [326983.731123] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00
kern :info : [326983.731433] serial 00:05: activated
kern :info : [326983.731665] parport_pc 00:06: activated
kern :info : [326983.731777] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [326983.734751] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [326983.937112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :info : [326983.937143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :debug : [326983.939577] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [326983.940261] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [326983.940264] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [326983.940266] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [326983.940523] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [326983.940568] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [326983.940571] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :debug : [326983.940648] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :debug : [326983.941963] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [326983.941965] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [326983.941967] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [326983.942131] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [326983.942218] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [326983.942221] ata1.00: configured for UDMA/133
kern :debug : [326983.944555] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [326983.945623] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [326983.945626] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [326983.946620] ata2.00: configured for UDMA/100
kern :info : [326983.947064] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
kern :info : [326983.947067] usb 1-6: reset high-speed USB device number 5 using ehci-pci
kern :debug : [326984.090714] hdaps: initial mode latch is 0x05
kern :debug : [326984.090826] hdaps: setting ec_rate=250, filter_order=2
kern :info : [326984.091053] PM: resume of devices complete after 463.366 msecs
kern :notice: [326984.091663] Restarting tasks ...
kern :info : [326984.091685] ACPI: \_SB_.GDCK: docking
kern :info : [326984.091947] usb 2-4: USB disconnect, device number 6
kern :info : [326984.092677] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
kern :notice: [326984.117125] done.
kern :info : [326984.134360] video LNXVIDEO:00: Restoring backlight state
kern :notice: [326984.184036] firewire_core 0000:15:00.1: rediscovered device fw0
kern :info : [326984.436036] usb 1-5: new high-speed USB device number 9 using ehci-pci
kern :info : [326984.551318] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485
kern :info : [326984.551330] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [326984.551598] hub 1-5:1.0: USB hub found
kern :info : [326984.551687] hub 1-5:1.0: 4 ports detected
kern :info : [326986.740970] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [326986.741263] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [326988.705116] usb 2-4: new high-speed USB device number 7 using ehci-pci
kern :info : [326989.524715] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [326989.524732] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [326989.524744] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [326989.524756] usb 2-4: Manufacturer: Ericsson
kern :info : [326989.524767] usb 2-4: SerialNumber: 3541430256485280
kern :info : [326989.538193] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [326989.612809] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [326989.627808] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [326989.633055] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [326989.639223] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [326989.646951] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :info : [327099.075335] e1000e: eth0 NIC Link is Down
kern :debug : [327103.653557] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :debug : [327103.754159] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :info : [327103.754511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [327103.763320] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [327103.766350] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [327103.790658] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [327106.021980] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [327106.022195] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [327112.811831] wlan0: authenticate with c0:25:06:47:03:83
kern :info : [327112.813482] wlan0: send auth to c0:25:06:47:03:83 (try 1/3)
kern :info : [327112.815803] wlan0: authenticated
kern :info : [327112.816052] wlan0: associate with c0:25:06:47:03:83 (try 1/3)
kern :info : [327112.833672] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1)
kern :info : [327112.843309] wlan0: associated
kern :info : [327112.843345] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
kern :info : [327112.843426] cfg80211: Calling CRDA for country: DE
kern :info : [327112.848122] cfg80211: Regulatory domain changed to country: DE
kern :info : [327112.848131] cfg80211: DFS Master region: unset
kern :info : [327112.848133] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [327112.848145] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [327112.848151] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [327112.848158] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
kern :info : [327112.848164] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
kern :info : [327112.848170] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
kern :warn : [376493.138285] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [376493.138315] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [376493.138328] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [376493.138343] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [376493.138359] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [376493.138375] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [376493.138400] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [376493.138411] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [376493.138427] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [376493.138438] i915 0000:00:02.0: using default PCI settings
kern :warn : [376493.138453] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [376493.138464] pci 0000:00:02.1: using default PCI settings
kern :warn : [376493.138480] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [376493.138490] pci 0000:00:03.0: using default PCI settings
kern :warn : [376493.138507] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [376493.138517] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [376493.138537] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [376493.138547] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [376493.138566] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [376493.138577] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [376493.138596] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [376493.138607] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [376493.138626] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [376493.138637] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [376493.138656] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [376493.138669] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [376493.138682] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [376493.138703] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [376493.138717] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [376493.138735] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [376493.138749] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [376493.138762] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [376493.138775] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [376493.138786] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [376493.138805] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [376493.138816] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [376493.138834] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [376493.138845] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [376493.138864] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [376493.138875] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [376493.138893] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [376493.138904] pci 0000:00:1e.0: using default PCI settings
kern :warn : [376493.138930] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [376493.138941] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [376493.138963] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [376493.138974] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [376493.138996] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [376493.139029] r592 0000:15:00.4: using default PCI settings
kern :warn : [376493.139054] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [376493.139065] pci 0000:15:00.5: using default PCI settings
kern :warn : [376493.139089] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [376493.139103] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [376493.139126] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [376493.139141] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [376493.139162] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [376493.139173] i801_smbus 0000:00:1f.3: using default PCI settings
kern :warn : [376533.072257] acpi PNP0401:00: Cannot transition to non-D0 state from D3
kern :info : [376533.072373] ACPI: \_SB_.GDCK: undocking
kern :info : [376533.089788] usb 1-5: USB disconnect, device number 9
kern :info : [376534.274221] e1000e: eth0 NIC Link is Down
kern :info : [376534.373287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [376534.821826] thinkpad_acpi: EC reports that Thermal Table has changed
kern :warn : [376534.822634] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [376534.822652] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [376534.822660] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [376534.822672] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [376534.822683] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [376534.822693] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [376534.822709] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [376534.822716] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [376534.822735] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [376534.822742] i915 0000:00:02.0: using default PCI settings
kern :warn : [376534.822755] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [376534.822761] pci 0000:00:02.1: using default PCI settings
kern :warn : [376534.822780] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [376534.822786] pci 0000:00:03.0: using default PCI settings
kern :warn : [376534.822801] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [376534.822807] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [376534.822821] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [376534.822827] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [376534.822840] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [376534.822847] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [376534.822860] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [376534.822866] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [376534.822879] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [376534.822886] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [376534.822899] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [376534.822908] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [376534.822916] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [376534.822931] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [376534.822938] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [376534.822951] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [376534.822959] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [376534.822967] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [376534.822975] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [376534.822982] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [376534.822995] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [376534.823028] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [376534.823042] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [376534.823049] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [376534.823061] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [376534.823068] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [376534.823081] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [376534.823088] pci 0000:00:1e.0: using default PCI settings
kern :warn : [376534.823107] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [376534.823114] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [376534.823130] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [376534.823137] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [376534.823152] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [376534.823159] r592 0000:15:00.4: using default PCI settings
kern :warn : [376534.823175] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [376534.823181] pci 0000:15:00.5: using default PCI settings
kern :warn : [376534.823196] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [376534.823203] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [376534.823218] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [376534.823224] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [376534.823237] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [376534.823243] i801_smbus 0000:00:1f.3: using default PCI settings
kern :info : [376535.214277] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [376535.311568] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [376535.668170] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376536.469988] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376537.271549] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376538.073355] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376538.875256] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376539.678238] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376540.480804] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376541.282900] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376542.086152] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376542.887971] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [376543.188977] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [376543.189297] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [376543.189531] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [376543.189604] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [376543.189618] ata1.00: configured for UDMA/133
kern :info : [376543.189636] ata1: EH complete
kern :notice: [376543.189808] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [376543.199341] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [376543.206641] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [376546.380547] PM: Syncing filesystems ... done.
kern :notice: [376546.444474] Freezing user space processes ... (elapsed 0.001 seconds) done.
kern :notice: [376546.446216] Freezing remaining freezable tasks ... (elapsed 5.747 seconds) done.
kern :notice: [376552.194155] Suspending console(s) (use no_console_suspend to debug)
kern :debug : [376552.194633] hdaps: setting ec_rate=0, filter_order=1
kern :info : [376552.408236] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING)
kern :notice: [376552.408905] sd 0:0:0:0: [sda] Stopping disk
kern :info : [376552.415407] parport_pc 00:06: disabled
kern :info : [376552.415460] serial 00:05: disabled
kern :info : [376552.415610] cfg80211: Calling CRDA to update world regulatory domain
kern :info : [376552.415796] serial 00:05: System wakeup disabled by ACPI
kern :info : [376552.871159] PM: suspend of devices complete after 676.642 msecs
kern :info : [376552.882096] PM: late suspend of devices complete after 10.932 msecs
kern :info : [376552.882731] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
kern :info : [376552.882819] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
kern :info : [376552.883058] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
kern :info : [376552.883133] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
kern :info : [376552.883182] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
kern :info : [376552.894035] PM: noirq suspend of devices complete after 11.936 msecs
kern :info : [376552.894648] ACPI: Preparing to enter system sleep state S3
kern :info : [376552.898642] PM: Saving platform NVS memory
kern :info : [376552.899641] Disabling non-boot CPUs ...
kern :info : [376552.900803] kvm: disabling virtualization on CPU1
kern :info : [376552.900945] smpboot: CPU 1 is now offline
kern :info : [376552.901212] ACPI: Low-level resume complete
kern :info : [376552.901212] PM: Restoring platform NVS memory
kern :info : [376552.901212] Enabling non-boot CPUs ...
kern :info : [376552.901212] x86: Booting SMP configuration:
kern :info : [376552.901212] smpboot: Booting Node 0 Processor 1 APIC 0x1
kern :info : [376552.900803] Disabled fast string operations
kern :info : [376552.900803] kvm: enabling virtualization on CPU1
kern :info : [376552.918283] CPU1 is up
kern :info : [376552.921140] ACPI: Waking up from system sleep state S3
kern :info : [376552.946378] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
kern :info : [376552.946442] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
kern :info : [376552.946912] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
kern :info : [376552.957094] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :info : [376552.957226] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :info : [376552.958534] PM: noirq resume of devices complete after 12.368 msecs
kern :info : [376552.958768] PM: early resume of devices complete after 0.197 msecs
kern :warn : [376552.965085] usb usb3: root hub lost power or was reset
kern :warn : [376552.965163] usb usb4: root hub lost power or was reset
kern :warn : [376552.965240] usb usb5: root hub lost power or was reset
kern :debug : [376552.965377] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kern :warn : [376552.965630] usb usb6: root hub lost power or was reset
kern :warn : [376552.965704] usb usb7: root hub lost power or was reset
kern :warn : [376552.965780] usb usb8: root hub lost power or was reset
kern :warn : [376552.965929] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :warn : [376552.966969] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :notice: [376552.968772] sd 0:0:0:0: [sda] Starting disk
kern :debug : [376553.040147] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :err : [376553.066109] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
kern :err : [376553.066112] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
kern :err : [376553.066117] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
kern :err : [376553.066120] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00
kern :info : [376553.066437] serial 00:05: activated
kern :info : [376553.066685] parport_pc 00:06: activated
kern :info : [376553.066820] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [376553.069790] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [376553.272112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :info : [376553.272141] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :debug : [376553.274876] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [376553.275246] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [376553.275248] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [376553.275251] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [376553.275455] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [376553.275557] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :debug : [376553.275969] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [376553.275971] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :debug : [376553.276848] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [376553.276850] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [376553.276851] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [376553.277024] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [376553.277084] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [376553.277087] ata1.00: configured for UDMA/133
kern :debug : [376553.280350] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [376553.281487] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [376553.281489] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [376553.282059] usb 1-6: reset high-speed USB device number 5 using ehci-pci
kern :info : [376553.282062] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
kern :info : [376553.282574] ata2.00: configured for UDMA/100
kern :notice: [376553.288270] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :debug : [376553.426000] hdaps: initial mode latch is 0x05
kern :debug : [376553.426130] hdaps: setting ec_rate=250, filter_order=2
kern :info : [376553.426361] PM: resume of devices complete after 467.591 msecs
kern :notice: [376553.426975] Restarting tasks ...
kern :info : [376553.438412] usb 2-4: USB disconnect, device number 7
kern :info : [376553.441591] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
kern :info : [376553.447142] cfg80211: World regulatory domain updated:
kern :info : [376553.447156] cfg80211: DFS Master region: unset
kern :info : [376553.447158] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [376553.447170] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [376553.447177] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [376553.447183] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [376553.447190] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [376553.447196] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :notice: [376553.451439] done.
kern :info : [376553.475296] video LNXVIDEO:00: Restoring backlight state
kern :notice: [376553.519045] firewire_core 0000:15:00.1: rediscovered device fw0
kern :info : [376554.114155] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [376554.239160] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [376556.219924] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [376556.220043] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [376556.220082] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [376556.499528] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [376558.142098] usb 2-4: new high-speed USB device number 8 using ehci-pci
kern :info : [376558.585240] thinkpad_acpi: EC reports that Thermal Table has changed
kern :warn : [376558.864089] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [376558.864193] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [376558.864394] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [376558.864467] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [376558.864480] ata1.00: configured for UDMA/133
kern :info : [376558.864498] ata1: EH complete
kern :info : [376558.902538] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [376558.902554] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [376558.902567] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [376558.902578] usb 2-4: Manufacturer: Ericsson
kern :info : [376558.902589] usb 2-4: SerialNumber: 3541430256485280
kern :info : [376558.913910] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [376558.924460] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [376558.925728] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [376558.931347] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [376558.934900] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [376558.946984] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [376558.950586] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [376558.955198] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [376558.964484] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :info : [376559.141880] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
kern :info : [376559.163751] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [376559.225890] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [376559.302562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [376561.013630] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [376561.013750] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [376561.013787] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [376643.542377] e1000e: eth0 NIC Link is Down
kern :debug : [376647.966692] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :debug : [376648.067207] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :info : [376648.067562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [376648.074767] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [376648.077762] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [376648.101617] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [376649.677884] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [376649.678015] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [376649.678064] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [411298.526258] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [411298.586131] e1000e: eth0 NIC Link is Down
kern :info : [411298.679724] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [411298.706962] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [411298.715765] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [411299.219884] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [411299.219942] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [411299.220122] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [411299.220177] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [411299.220185] ata1.00: configured for UDMA/133
kern :info : [411299.220198] ata1: EH complete
kern :notice: [411299.220469] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [411299.228658] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [411299.235990] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [411304.413102] PM: Syncing filesystems ... done.
kern :notice: [411304.476062] Freezing user space processes ... (elapsed 0.001 seconds) done.
kern :notice: [411304.477670] Freezing remaining freezable tasks ... (elapsed 2.394 seconds) done.
kern :notice: [411306.871946] Suspending console(s) (use no_console_suspend to debug)
kern :debug : [411306.872426] hdaps: setting ec_rate=0, filter_order=1
kern :notice: [411307.073399] sd 0:0:0:0: [sda] Stopping disk
kern :info : [411307.073753] parport_pc 00:06: disabled
kern :info : [411307.073811] serial 00:05: disabled
kern :info : [411307.074060] serial 00:05: System wakeup disabled by ACPI
kern :info : [411307.665159] PM: suspend of devices complete after 792.846 msecs
kern :info : [411307.676108] PM: late suspend of devices complete after 10.945 msecs
kern :info : [411307.676771] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
kern :info : [411307.676859] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
kern :info : [411307.677327] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
kern :info : [411307.677376] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
kern :info : [411307.677395] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
kern :info : [411307.688032] PM: noirq suspend of devices complete after 11.921 msecs
kern :info : [411307.688651] ACPI: Preparing to enter system sleep state S3
kern :info : [411307.692563] PM: Saving platform NVS memory
kern :info : [411307.693564] Disabling non-boot CPUs ...
kern :info : [411307.694726] kvm: disabling virtualization on CPU1
kern :info : [411307.694870] smpboot: CPU 1 is now offline
kern :info : [411307.695124] ACPI: Low-level resume complete
kern :info : [411307.695124] PM: Restoring platform NVS memory
kern :info : [411307.695124] Enabling non-boot CPUs ...
kern :info : [411307.695124] x86: Booting SMP configuration:
kern :info : [411307.695124] smpboot: Booting Node 0 Processor 1 APIC 0x1
kern :info : [411307.694726] Disabled fast string operations
kern :info : [411307.694726] kvm: enabling virtualization on CPU1
kern :info : [411307.715350] CPU1 is up
kern :info : [411307.718219] ACPI: Waking up from system sleep state S3
kern :info : [411307.739376] thinkpad_acpi: EC reports that Thermal Table has changed
kern :info : [411307.745193] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
kern :info : [411307.745279] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
kern :info : [411307.745643] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
kern :info : [411307.756111] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :info : [411307.756377] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :info : [411307.756735] PM: noirq resume of devices complete after 11.750 msecs
kern :info : [411307.756965] PM: early resume of devices complete after 0.193 msecs
kern :warn : [411307.763441] usb usb3: root hub lost power or was reset
kern :warn : [411307.763696] usb usb4: root hub lost power or was reset
kern :warn : [411307.763726] usb usb5: root hub lost power or was reset
kern :debug : [411307.763824] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kern :warn : [411307.763934] usb usb6: root hub lost power or was reset
kern :warn : [411307.764004] usb usb7: root hub lost power or was reset
kern :warn : [411307.764157] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :warn : [411307.764257] usb usb8: root hub lost power or was reset
kern :notice: [411307.764341] sd 0:0:0:0: [sda] Starting disk
kern :warn : [411307.765403] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :debug : [411307.834156] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :err : [411307.864052] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
kern :err : [411307.864055] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
kern :err : [411307.864104] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
kern :err : [411307.864106] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00
kern :info : [411307.864438] serial 00:05: activated
kern :info : [411307.864676] parport_pc 00:06: activated
kern :info : [411307.864789] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [411307.867754] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [411308.069056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :info : [411308.069087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :debug : [411308.071560] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [411308.072211] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [411308.072214] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [411308.072216] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [411308.072426] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [411308.072530] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :debug : [411308.072576] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [411308.072579] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :debug : [411308.076674] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [411308.077791] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [411308.077794] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [411308.078876] ata2.00: configured for UDMA/100
kern :info : [411308.079048] usb 1-6: reset high-speed USB device number 5 using ehci-pci
kern :debug : [411308.079544] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [411308.079551] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [411308.079552] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [411308.079723] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [411308.079817] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [411308.079821] ata1.00: configured for UDMA/133
kern :info : [411308.080057] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
kern :notice: [411308.090256] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :debug : [411308.227719] hdaps: initial mode latch is 0x05
kern :debug : [411308.227832] hdaps: setting ec_rate=250, filter_order=2
kern :info : [411308.228062] PM: resume of devices complete after 471.095 msecs
kern :notice: [411308.228669] Restarting tasks ...
kern :info : [411308.228694] ACPI: \_SB_.GDCK: docking
kern :info : [411308.232540] usb 2-4: USB disconnect, device number 8
kern :info : [411308.234804] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
kern :notice: [411308.252059] done.
kern :info : [411308.286601] video LNXVIDEO:00: Restoring backlight state
kern :notice: [411308.317034] firewire_core 0000:15:00.1: rediscovered device fw0
kern :info : [411308.448042] usb 1-5: new high-speed USB device number 10 using ehci-pci
kern :info : [411308.562404] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485
kern :info : [411308.562419] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [411308.562680] hub 1-5:1.0: USB hub found
kern :info : [411308.562772] hub 1-5:1.0: 4 ports detected
kern :info : [411308.912587] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
kern :info : [411308.980241] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :warn : [411308.996381] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [411308.996431] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [411308.996581] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [411308.996625] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [411308.996633] ata1.00: configured for UDMA/133
kern :info : [411308.996646] ata1: EH complete
kern :info : [411309.020146] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [411309.039568] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [411309.305489] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [411311.033910] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [411311.034082] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [411312.828188] usb 2-4: new high-speed USB device number 9 using ehci-pci
kern :info : [411313.696644] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [411313.696674] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [411313.696698] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [411313.696721] usb 2-4: Manufacturer: Ericsson
kern :info : [411313.696743] usb 2-4: SerialNumber: 3541430256485280
kern :info : [411313.743117] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [411313.760695] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [411313.773934] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [411313.777557] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [411313.785919] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [411313.797105] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :info : [411318.239655] e1000e: eth0 NIC Link is Down
kern :debug : [411322.063876] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :debug : [411322.164176] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :info : [411322.164334] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [411322.167113] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [411322.170085] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [411322.193747] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [411324.575981] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [411324.576132] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [411326.802865] wlan0: authenticate with c0:25:06:47:03:83
kern :info : [411326.805948] wlan0: send auth to c0:25:06:47:03:83 (try 1/3)
kern :info : [411326.808294] wlan0: authenticated
kern :info : [411326.808428] wlan0: waiting for beacon from c0:25:06:47:03:83
kern :info : [411326.890134] wlan0: associate with c0:25:06:47:03:83 (try 1/3)
kern :info : [411326.911592] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1)
kern :info : [411326.923217] wlan0: associated
kern :info : [411326.923292] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
kern :info : [411326.923442] cfg80211: Calling CRDA for country: DE
kern :info : [411326.929474] cfg80211: Regulatory domain changed to country: DE
kern :info : [411326.929501] cfg80211: DFS Master region: unset
kern :info : [411326.929507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [411326.929547] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [411326.929569] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
kern :info : [411326.929592] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
kern :info : [411326.929614] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
kern :info : [411326.929636] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
kern :info : [432930.962712] wlan0: AP c0:25:06:47:03:83 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
kern :info : [433230.889035] wlan0: AP c0:25:06:47:03:83 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
kern :err : [451833.063121] iwlwifi 0000:03:00.0: fail to flush all tx fifo queues Q 2
kern :err : [451833.063152] iwlwifi 0000:03:00.0: Current SW read_ptr 211 write_ptr 212
kern :err : [451833.063201] iwl data: 00000000: 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
kern :err : [451833.063237] iwlwifi 0000:03:00.0: FH TRBs(0) = 0x00000000
kern :err : [451833.063271] iwlwifi 0000:03:00.0: FH TRBs(1) = 0x801020d3
kern :err : [451833.063306] iwlwifi 0000:03:00.0: FH TRBs(2) = 0x00000000
kern :err : [451833.063340] iwlwifi 0000:03:00.0: FH TRBs(3) = 0x8030007c
kern :err : [451833.063374] iwlwifi 0000:03:00.0: FH TRBs(4) = 0x00000000
kern :err : [451833.063408] iwlwifi 0000:03:00.0: FH TRBs(5) = 0x00000000
kern :err : [451833.063441] iwlwifi 0000:03:00.0: FH TRBs(6) = 0x00000000
kern :err : [451833.063476] iwlwifi 0000:03:00.0: FH TRBs(7) = 0x00704016
kern :err : [451833.063555] iwlwifi 0000:03:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [125,125]
kern :err : [451833.063634] iwlwifi 0000:03:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
kern :err : [451833.063714] iwlwifi 0000:03:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [211,212]
kern :err : [451833.063793] iwlwifi 0000:03:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.063873] iwlwifi 0000:03:00.0: Q 4 is active and mapped to fifo 7 ra_tid 0x0000 [23,23]
kern :err : [451833.063952] iwlwifi 0000:03:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064061] iwlwifi 0000:03:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064143] iwlwifi 0000:03:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064223] iwlwifi 0000:03:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064302] iwlwifi 0000:03:00.0: Q 9 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064381] iwlwifi 0000:03:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064463] iwlwifi 0000:03:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064543] iwlwifi 0000:03:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064621] iwlwifi 0000:03:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064701] iwlwifi 0000:03:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064780] iwlwifi 0000:03:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064859] iwlwifi 0000:03:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.064941] iwlwifi 0000:03:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.065042] iwlwifi 0000:03:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :err : [451833.065126] iwlwifi 0000:03:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
kern :warn : [458914.694523] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [458914.694578] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [458914.694603] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [458914.694632] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [458914.694662] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [458914.694691] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [458914.694735] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [458914.694757] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [458914.694789] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [458914.694811] i915 0000:00:02.0: using default PCI settings
kern :warn : [458914.694842] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [458914.694864] pci 0000:00:02.1: using default PCI settings
kern :warn : [458914.694894] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [458914.694916] pci 0000:00:03.0: using default PCI settings
kern :warn : [458914.694947] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [458914.694969] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [458914.695040] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [458914.695065] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [458914.695103] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [458914.695130] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [458914.695168] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [458914.695190] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [458914.695225] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [458914.695248] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [458914.695284] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [458914.695312] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [458914.695339] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [458914.695379] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [458914.695407] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [458914.695443] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [458914.695470] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [458914.695498] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [458914.695526] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [458914.695548] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [458914.695583] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [458914.695605] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [458914.695639] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [458914.695661] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [458914.695695] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [458914.695717] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [458914.695752] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [458914.695774] pci 0000:00:1e.0: using default PCI settings
kern :warn : [458914.695818] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [458914.695841] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [458914.695881] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [458914.695904] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [458914.695944] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [458914.695966] r592 0000:15:00.4: using default PCI settings
kern :warn : [458914.696028] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [458914.696031] pci 0000:15:00.5: using default PCI settings
kern :warn : [458914.696049] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [458914.696051] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [458914.696068] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [458914.696070] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [458914.696085] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [458914.696087] i801_smbus 0000:00:1f.3: using default PCI settings
kern :warn : [459515.871461] acpi PNP0401:00: Cannot transition to non-D0 state from D3
kern :info : [459515.871576] ACPI: \_SB_.GDCK: undocking
kern :info : [459515.888911] usb 1-5: USB disconnect, device number 10
kern :info : [459517.020181] e1000e: eth0 NIC Link is Down
kern :info : [459517.119181] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [459517.562270] thinkpad_acpi: EC reports that Thermal Table has changed
kern :warn : [459517.562833] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
kern :info : [459517.562851] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17]
kern :info : [459517.562859] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff]
kern :info : [459517.562870] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff]
kern :info : [459517.562880] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
kern :info : [459517.562891] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
kern :warn : [459517.562910] agpgart-intel 0000:00:00.0: no hotplug settings from platform
kern :info : [459517.562916] agpgart-intel 0000:00:00.0: using default PCI settings
kern :warn : [459517.562926] i915 0000:00:02.0: no hotplug settings from platform
kern :info : [459517.562932] i915 0000:00:02.0: using default PCI settings
kern :warn : [459517.562951] pci 0000:00:02.1: no hotplug settings from platform
kern :info : [459517.562958] pci 0000:00:02.1: using default PCI settings
kern :warn : [459517.562967] pci 0000:00:03.0: no hotplug settings from platform
kern :info : [459517.562974] pci 0000:00:03.0: using default PCI settings
kern :warn : [459517.562985] e1000e 0000:00:19.0: no hotplug settings from platform
kern :info : [459517.562991] e1000e 0000:00:19.0: using default PCI settings
kern :warn : [459517.563021] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
kern :info : [459517.563028] uhci_hcd 0000:00:1a.0: using default PCI settings
kern :warn : [459517.563042] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
kern :info : [459517.563048] uhci_hcd 0000:00:1a.1: using default PCI settings
kern :warn : [459517.563061] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
kern :info : [459517.563067] uhci_hcd 0000:00:1a.2: using default PCI settings
kern :warn : [459517.563080] ehci-pci 0000:00:1a.7: no hotplug settings from platform
kern :info : [459517.563087] ehci-pci 0000:00:1a.7: using default PCI settings
kern :warn : [459517.563100] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kern :warn : [459517.563109] pcieport 0000:00:1c.0: no hotplug settings from platform
kern :warn : [459517.563117] pcieport 0000:00:1c.1: no hotplug settings from platform
kern :warn : [459517.563131] iwlwifi 0000:03:00.0: no hotplug settings from platform
kern :warn : [459517.563139] pcieport 0000:00:1c.2: no hotplug settings from platform
kern :warn : [459517.563152] pci 0000:04:00.0: no hotplug settings from platform
kern :warn : [459517.563160] pcieport 0000:00:1c.3: no hotplug settings from platform
kern :warn : [459517.563167] pcieport 0000:00:1c.4: no hotplug settings from platform
kern :warn : [459517.563175] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
kern :info : [459517.563181] uhci_hcd 0000:00:1d.0: using default PCI settings
kern :warn : [459517.563194] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
kern :info : [459517.563201] uhci_hcd 0000:00:1d.1: using default PCI settings
kern :warn : [459517.563214] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
kern :info : [459517.563220] uhci_hcd 0000:00:1d.2: using default PCI settings
kern :warn : [459517.563234] ehci-pci 0000:00:1d.7: no hotplug settings from platform
kern :info : [459517.563240] ehci-pci 0000:00:1d.7: using default PCI settings
kern :warn : [459517.563254] pci 0000:00:1e.0: no hotplug settings from platform
kern :info : [459517.563260] pci 0000:00:1e.0: using default PCI settings
kern :warn : [459517.563279] firewire_ohci 0000:15:00.1: no hotplug settings from platform
kern :info : [459517.563286] firewire_ohci 0000:15:00.1: using default PCI settings
kern :warn : [459517.563302] sdhci-pci 0000:15:00.2: no hotplug settings from platform
kern :info : [459517.563308] sdhci-pci 0000:15:00.2: using default PCI settings
kern :warn : [459517.563324] r592 0000:15:00.4: no hotplug settings from platform
kern :info : [459517.563331] r592 0000:15:00.4: using default PCI settings
kern :warn : [459517.563346] pci 0000:15:00.5: no hotplug settings from platform
kern :info : [459517.563352] pci 0000:15:00.5: using default PCI settings
kern :warn : [459517.563367] lpc_ich 0000:00:1f.0: no hotplug settings from platform
kern :info : [459517.563373] lpc_ich 0000:00:1f.0: using default PCI settings
kern :warn : [459517.563388] ahci 0000:00:1f.2: no hotplug settings from platform
kern :info : [459517.563394] ahci 0000:00:1f.2: using default PCI settings
kern :warn : [459517.563407] i801_smbus 0000:00:1f.3: no hotplug settings from platform
kern :info : [459517.563414] i801_smbus 0000:00:1f.3: using default PCI settings
kern :info : [459517.785355] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [459517.832515] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :warn : [459518.376481] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459519.178862] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459519.981540] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459520.783476] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459521.594290] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459522.396078] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459523.199433] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459524.000693] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459524.802309] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459525.603746] e1000e 0000:00:19.0 eth0: Error reading PHY register
kern :warn : [459525.933859] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [459525.933956] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [459525.934364] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [459525.934436] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [459525.934444] ata1.00: configured for UDMA/133
kern :info : [459525.934456] ata1: EH complete
kern :notice: [459525.934577] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kern :info : [459525.945353] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [459525.950506] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [459542.297838] PM: Syncing filesystems ... done.
kern :notice: [459542.360546] Freezing user space processes ... (elapsed 0.001 seconds) done.
kern :notice: [459542.362191] Freezing remaining freezable tasks ... (elapsed 5.481 seconds) done.
kern :notice: [459547.843827] Suspending console(s) (use no_console_suspend to debug)
kern :debug : [459547.844313] hdaps: setting ec_rate=0, filter_order=1
kern :info : [459548.040848] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING)
kern :notice: [459548.041431] sd 0:0:0:0: [sda] Stopping disk
kern :info : [459548.049697] parport_pc 00:06: disabled
kern :info : [459548.049752] serial 00:05: disabled
kern :info : [459548.049883] cfg80211: Calling CRDA to update world regulatory domain
kern :info : [459548.050042] serial 00:05: System wakeup disabled by ACPI
kern :info : [459548.455161] PM: suspend of devices complete after 610.961 msecs
kern :info : [459548.466108] PM: late suspend of devices complete after 10.942 msecs
kern :info : [459548.466773] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
kern :info : [459548.466861] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
kern :info : [459548.467103] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
kern :info : [459548.467282] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
kern :info : [459548.467300] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
kern :info : [459548.478027] PM: noirq suspend of devices complete after 11.916 msecs
kern :info : [459548.478641] ACPI: Preparing to enter system sleep state S3
kern :info : [459548.482586] PM: Saving platform NVS memory
kern :info : [459548.483599] Disabling non-boot CPUs ...
kern :info : [459548.484764] kvm: disabling virtualization on CPU1
kern :info : [459548.484907] smpboot: CPU 1 is now offline
kern :info : [459548.485160] ACPI: Low-level resume complete
kern :info : [459548.485160] PM: Restoring platform NVS memory
kern :info : [459548.485160] Enabling non-boot CPUs ...
kern :info : [459548.485160] x86: Booting SMP configuration:
kern :info : [459548.485160] smpboot: Booting Node 0 Processor 1 APIC 0x1
kern :info : [459548.484764] Disabled fast string operations
kern :info : [459548.484764] kvm: enabling virtualization on CPU1
kern :info : [459548.502260] CPU1 is up
kern :info : [459548.505146] ACPI: Waking up from system sleep state S3
kern :info : [459548.530699] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
kern :info : [459548.530744] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
kern :info : [459548.531164] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
kern :info : [459548.541206] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
kern :info : [459548.542123] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
kern :info : [459548.542573] PM: noirq resume of devices complete after 12.162 msecs
kern :info : [459548.542810] PM: early resume of devices complete after 0.200 msecs
kern :warn : [459548.548799] usb usb3: root hub lost power or was reset
kern :warn : [459548.548888] usb usb4: root hub lost power or was reset
kern :warn : [459548.549004] usb usb5: root hub lost power or was reset
kern :debug : [459548.549149] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kern :warn : [459548.549280] usb usb6: root hub lost power or was reset
kern :warn : [459548.549337] usb usb7: root hub lost power or was reset
kern :warn : [459548.549379] usb usb8: root hub lost power or was reset
kern :warn : [459548.549446] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :warn : [459548.549575] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
kern :notice: [459548.551138] sd 0:0:0:0: [sda] Starting disk
kern :debug : [459548.620249] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :err : [459548.649109] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
kern :err : [459548.649111] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
kern :err : [459548.649117] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
kern :err : [459548.649120] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00
kern :info : [459548.649442] serial 00:05: activated
kern :info : [459548.649689] parport_pc 00:06: activated
kern :info : [459548.649801] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [459548.652772] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [459548.855114] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
kern :info : [459548.855144] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kern :debug : [459548.857619] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [459548.858283] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [459548.858286] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [459548.858293] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [459548.858546] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [459548.858659] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [459548.858662] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :debug : [459548.858670] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :debug : [459548.860005] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
kern :info : [459548.860013] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
kern :info : [459548.860014] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :warn : [459548.860183] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [459548.860276] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [459548.860280] ata1.00: configured for UDMA/133
kern :debug : [459548.862759] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
kern :debug : [459548.863837] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
kern :info : [459548.863840] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [459548.864072] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
kern :info : [459548.864079] usb 1-6: reset high-speed USB device number 5 using ehci-pci
kern :info : [459548.864934] ata2.00: configured for UDMA/100
kern :notice: [459548.871254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kern :debug : [459549.008519] hdaps: initial mode latch is 0x05
kern :debug : [459549.008641] hdaps: setting ec_rate=250, filter_order=2
kern :info : [459549.008869] PM: resume of devices complete after 466.057 msecs
kern :notice: [459549.009486] Restarting tasks ...
kern :info : [459549.021222] usb 2-4: USB disconnect, device number 9
kern :notice: [459549.021418] done.
kern :info : [459549.024071] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
kern :info : [459549.039282] video LNXVIDEO:00: Restoring backlight state
kern :info : [459549.094956] cfg80211: World regulatory domain updated:
kern :info : [459549.094972] cfg80211: DFS Master region: unset
kern :info : [459549.094974] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
kern :info : [459549.094986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [459549.094993] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [459549.094999] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [459549.095025] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :info : [459549.095033] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
kern :notice: [459549.103037] firewire_core 0000:15:00.1: rediscovered device fw0
kern :info : [459549.660994] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [459549.663382] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [459549.818873] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600
kern :info : [459549.873754] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
kern :info : [459551.162857] thinkpad_acpi: EC reports that Thermal Table has changed
kern :warn : [459552.909669] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [459552.909727] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :warn : [459552.909918] ata1.00: supports DRM functions and may not be fully accessible
kern :debug : [459552.909995] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
kern :info : [459552.910027] ata1.00: configured for UDMA/133
kern :info : [459552.910048] ata1: EH complete
kern :info : [459553.626100] usb 2-4: new high-speed USB device number 10 using ehci-pci
kern :info : [459553.678829] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
kern :info : [459553.685330] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
kern :info : [459554.530603] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
kern :info : [459554.530636] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [459554.530660] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
kern :info : [459554.530684] usb 2-4: Manufacturer: Ericsson
kern :info : [459554.530705] usb 2-4: SerialNumber: 3541430256485280
kern :info : [459554.549293] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
kern :info : [459554.565284] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
kern :info : [459554.576766] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
kern :info : [459554.581883] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
kern :info : [459554.587480] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
kern :info : [459554.597801] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
kern :info : [459555.061031] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [459555.061171] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [459555.061241] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
kern :info : [459627.504490] e1000e: eth0 NIC Link is Down
kern :info : [459627.511140] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :debug : [459631.735793] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :debug : [459631.836203] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
kern :info : [459631.836580] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kern :info : [459631.848930] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
kern :info : [459631.851915] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
kern :info : [459631.875833] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
kern :info : [459633.349029] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
kern :info : [459633.349173] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
kern :info : [459633.349242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[-- Attachment #2: Type: application/pgp-signature, Size: 648 bytes --]
reply other threads:[~2014-10-01 10:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141001103405.GC472@kalium \
--to=bebl@mageta.org \
--cc=benjamin.widawsky@intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=linux-kernel@vger.kernel.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.