Re: [PATCH] USB: serial: cp210x: Add Silicon Labs 358x VID and PID.

[Greg KH <gregkh@linuxfoundation.org>]

On Fri, Oct 03, 2014 at 12:01:20PM -0400, Nathaniel Ting wrote:
> From: Nathaniel Ting <nathaniel.ting@silabs.com>
> 
> Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
> driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
> connect to host PCs over a USB serial link.
> 
> Signed-off-by: Nathaniel Ting <nathaniel.ting@silabs.com>
> ---
>  drivers/usb/serial/cp210x.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index e4bb622..ab1eb9b 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
>  	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
>  	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
>  	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
> +	{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
>  	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
>  	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
>  	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
> -- 
> 1.9.1

Much better, thanks.

Johan will queue this up to his tree in a bit and will then send it on
to me.

thanks,

greg k-h