diff for duplicates of <20141006135009.6cd980a1@bbrezillon>

diff --git a/a/1.txt b/N1/1.txt
index d660357..ae0fb75 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -181,8 +181,8 @@ Here is what the datasheet says:
 
 "Due to the comparison mechanism, the output pulse has a width between
 zero and 255 PWM counter cycles. Thus by adding a simple passive filter
-outside the chip, an analog voltage between 0 and (255/256) × VDD can
-be obtained (for the positive polarity case, or between (1/256) × VDD
+outside the chip, an analog voltage between 0 and (255/256) ? VDD can
+be obtained (for the positive polarity case, or between (1/256) ? VDD
 and VDD for the negative polarity case). Other voltage values can be
 obtained by adding active external circuitry."
 
@@ -219,7 +219,7 @@ I'm asked to configure a duty cycle occupying the whole period.
 Quote from the datasheet:
 
 "
-• PWMPOL: LCD Controller PWM Signal Polarity
+? PWMPOL: LCD Controller PWM Signal Polarity
 This bit defines the polarity of the PWM output signal. If set to one,
 the output pulses are high level (the output will be high when- ever
 the value in the counter is less than the value CVAL) If set to zero,
@@ -241,7 +241,3 @@ Boris
 Boris Brezillon, Free Electrons
 Embedded Linux and Kernel engineering
 http://free-electrons.com
-_______________________________________________
-dri-devel mailing list
-dri-devel@lists.freedesktop.org
-http://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/a/content_digest b/N1/content_digest
index 0305607..cc5cd89 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,27 +1,10 @@
  "ref\01412175188-28278-1-git-send-email-boris.brezillon@free-electrons.com\0"
  "ref\01412175188-28278-4-git-send-email-boris.brezillon@free-electrons.com\0"
  "ref\020141006104634.GE25202@ulmo\0"
- "From\0Boris Brezillon <boris.brezillon@free-electrons.com>\0"
- "Subject\0Re: [PATCH v7 03/11] pwm: add support for atmel-hlcdc-pwm device\0"
+ "From\0boris.brezillon@free-electrons.com (Boris Brezillon)\0"
+ "Subject\0[PATCH v7 03/11] pwm: add support for atmel-hlcdc-pwm device\0"
  "Date\0Mon, 6 Oct 2014 13:50:09 +0200\0"
- "To\0Thierry Reding <thierry.reding@gmail.com>\0"
- "Cc\0Mark Rutland <mark.rutland@arm.com>"
-  linux-pwm@vger.kernel.org
-  devicetree@vger.kernel.org
-  Samuel Ortiz <sameo@linux.intel.com>
-  Pawel Moll <pawel.moll@arm.com>
-  Ian Campbell <ijc+devicetree@hellion.org.uk>
-  Lee Jones <lee.jones@linaro.org>
-  Nicolas Ferre <nicolas.ferre@atmel.com>
-  linux-kernel@vger.kernel.org
-  dri-devel@lists.freedesktop.org
-  Rob Herring <robh+dt@kernel.org>
-  Alexandre Belloni <alexandre.belloni@free-electrons.com>
-  Kumar Gala <galak@codeaurora.org>
-  Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
-  Andrew Victor <linux@maxim.org.za>
-  linux-arm-kernel@lists.infradead.org
- " Mark Yao <mark.yao@rock-chips.com>\0"
+ "To\0linux-arm-kernel@lists.infradead.org\0"
  "\00:1\0"
  "b\0"
  "On Mon, 6 Oct 2014 12:46:35 +0200\n"
@@ -207,8 +190,8 @@
  "\n"
  "\"Due to the comparison mechanism, the output pulse has a width between\n"
  "zero and 255 PWM counter cycles. Thus by adding a simple passive filter\n"
- "outside the chip, an analog voltage between 0 and (255/256) \303\227 VDD can\n"
- "be obtained (for the positive polarity case, or between (1/256) \303\227 VDD\n"
+ "outside the chip, an analog voltage between 0 and (255/256) ? VDD can\n"
+ "be obtained (for the positive polarity case, or between (1/256) ? VDD\n"
  "and VDD for the negative polarity case). Other voltage values can be\n"
  "obtained by adding active external circuitry.\"\n"
  "\n"
@@ -245,7 +228,7 @@
  "Quote from the datasheet:\n"
  "\n"
  "\"\n"
- "\342\200\242 PWMPOL: LCD Controller PWM Signal Polarity\n"
+ "? PWMPOL: LCD Controller PWM Signal Polarity\n"
  "This bit defines the polarity of the PWM output signal. If set to one,\n"
  "the output pulses are high level (the output will be high when- ever\n"
  "the value in the counter is less than the value CVAL) If set to zero,\n"
@@ -266,10 +249,6 @@
  "-- \n"
  "Boris Brezillon, Free Electrons\n"
  "Embedded Linux and Kernel engineering\n"
- "http://free-electrons.com\n"
- "_______________________________________________\n"
- "dri-devel mailing list\n"
- "dri-devel@lists.freedesktop.org\n"
- http://lists.freedesktop.org/mailman/listinfo/dri-devel
+ http://free-electrons.com
 
-6089f4979dad140b8e9198ae5817cda1db7dd55962b25b25d88c8ef88f5e6482
+4b75b1e277e12c905fbf831f917d3480549453287fcfbfe9be288903dc7bfae6
