From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
Arnd Bergmann <arnd@arndb.de>
Cc: linux-kernel@vger.kernel.org
Subject: [GIT PULL] char/misc driver patches for 3.18-rc1
Date: Tue, 7 Oct 2014 15:33:53 -0700 [thread overview]
Message-ID: <20141007223353.GA5630@kroah.com> (raw)
The following changes since commit 9e82bf014195d6f0054982c463575cdce24292be:
Linux 3.17-rc5 (2014-09-14 17:50:12 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git/ tags/char-misc-3.18-rc1
for you to fetch changes up to 480bd3c4ad30558dd26c16e3f8358e36522d9af0:
mei: mei_txe_fw_sts can be static (2014-09-29 18:21:46 -0700)
----------------------------------------------------------------
Char/Misc driver patches for 3.18-rc1
Here's the big set of driver patches for char/misc drivers. Nothing
major in here, the shortlog below goes into the details. All have been
in the linux-next tree for a while with no issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Alexander Usyskin (11):
mei: me: wait for hw ready non-interruptible
mei: amthif: use service function to flush amthif queue
mei: amthif: don't check amthif client identity on amthif queues
mei: wait for hbm start non-interruptible
mei: bus: fix possible boundaries violation
mei: add hbm and pg state in devstate debugfs print
mei: debugfs: adjust print buffer
mei: trivial: fix errors in prints in comments
mei: drop me_client_presentation_num
mei: fix KDoc documentation formatting
mei: fix kernel-doc warnings
Chanwoo Choi (6):
extcon: sm5502: Fix bug to check cable type
extcon: sm5502: Add I2C dependency to fix build break
extcon: sm5502: Move sm5502.h header file to extcon directory
extcon: sm5502: Clean up codes by using checkpatch script
extcon: rt8973a: Add Richtek RT8973A extcon driver
dt-bindings: extcon: Add support for Richtek RT8973A MUIC device
Dan Carpenter (1):
VMCI: integer overflow in vmci_datagram_dispatch()
Eberhard S. Amann (1):
GenWQE: Fix problem when reading HSI and Retc
Eli Billauer (1):
documentation: devicetree: Added xillybus to vendor-prefixes
Federico Vaga (4):
ipoctal: reset function istead of duplicate code
ipack: save carrier owner to allow device to get it
ipoctal: get carrier driver to avoid rmmod
ipoctal: clear break interrupt as soon as it occurs
Fengguang Wu (1):
mei: mei_txe_fw_sts can be static
Frank Haverkamp (7):
GenWQE: Check pci_get_totalvfs return code
GenWQE: Remove sysfs entry for driver version
GenWQE: Update author information
GenWQE: Do not modify return code of genwqe_set_interrupt_capability
GenWQE: Check return code of pci_sriov_enable
GenWQE: Fix checkpatch complaints
GenWQE: Support blocking when DDCB queue is busy
George Cherian (1):
extcon: gpio: Fix code cleanup
Greg Kroah-Hartman (1):
Merge tag 'extcon-next-for-3.18' of git://git.kernel.org/.../chanwoo/extcon into char-misc-next
Himangi Saraogi (2):
EEPROM: Introduce the use of devm_kzalloc
pcie-gadget-spear: use devm_ functions
Jean Delvare (1):
extcon: sm5502: Drop useless include
Jonghwa Lee (1):
extcon: max77693: Fix a bug occured at changing ADC debounce time.
K. Y. Srinivasan (9):
Drivers: hv: vmbus: Cleanup vmbus_post_msg()
Drivers: hv: vmbus: Cleanup vmbus_teardown_gpadl()
Drivers: hv: vmbus: Cleanup vmbus_establish_gpadl()
Drivers: hv: vmbus: Fix a bug in vmbus_open()
Drivers: hv: vmbus: Cleanup vmbus_close_internal()
Drivers: hv: vmbus: Cleanup hv_post_message()
Drivers: hv: vmbus: Properly protect calls to smp_processor_id()
Drivers: hv: util: Properly pack the data for file copy functionality
Drivers: hv: vmbus: Enable interrupt driven flow control
Krzysztof Kozlowski (1):
extcon: max77693: Use resource managed interrupt line
Lee Jones (2):
misc: st_core: Protect unsigned value against becoming negative
misc: st_kim: Increase size of dev_name buffer to incorporate termination
Matwey V. Kornilov (2):
parport: parport_pc: Introduce intel_bug_present function.
parport: parport_pc: Implement architecture and device check to cut off false-positives
Michal Simek (1):
char: xilinx_hwicap: Remove .owner field for driver
Rasmus Villemoes (1):
drivers/ipack/devices/ipoctal.h: Fix typo in include guard
Steven Honeyman (1):
i8k: Add support for Dell Latitude E6540
Takashi Iwai (1):
misc: lattice-ecp3-config: Add missing MODULE_FIRMWARE()
Tomas Winkler (25):
mei: use consistently me_addr in the hbm structures
mei: use wrapper for simple hbm client message
mei: me_client lookup function to return me_client object
mei: use list for me clients book keeping
mei: add me client remove functions
mei: add mei_me_cl_by_uuid_id function
mei: add hbm commands return status values
mei: use disconnect name consistently
mei: revamp connect and disconnect response handling
mei: simplify handling of hbm client events
mei: extract supported features from the hbm version
mei: enable adding more IOCTL handlers
mei: use connect_data on the stack
mei: debugfs: add single buffer indicator
mei: pg: fix cat and paste error in comments
mei: fix style warning: Missing a blank line after declarations
mei: nfc: fix style warning
mei: kill error message for allocation failure
mei: move mei_hbm_hdr function from hbm.h the hbm.c
mei: push all standard settings into mei_device_init
mei: get rid of most of the pci dependencies in mei
mei: move fw_status back to hw ops handlers
mei: remove the reference to pdev from mei_device
mei: push pci cfg structure me hw
mei: remove include to pci header from mei module files
.../devicetree/bindings/extcon/extcon-rt8973a.txt | 25 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/char/i8k.c | 13 +
drivers/char/xilinx_hwicap/xilinx_hwicap.c | 1 -
drivers/extcon/Kconfig | 13 +
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-gpio.c | 10 +-
drivers/extcon/extcon-max77693.c | 37 +-
drivers/extcon/extcon-rt8973a.c | 740 +++++++++++++++++++++
drivers/extcon/extcon-rt8973a.h | 203 ++++++
drivers/extcon/extcon-sm5502.c | 20 +-
.../sm5502.h => drivers/extcon/extcon-sm5502.h | 5 -
drivers/hv/channel.c | 56 +-
drivers/hv/channel_mgmt.c | 21 +-
drivers/hv/connection.c | 17 +-
drivers/hv/hv.c | 27 +-
drivers/hv/hyperv_vmbus.h | 4 +
drivers/hv/ring_buffer.c | 5 +
drivers/ipack/carriers/tpci200.c | 3 +-
drivers/ipack/devices/ipoctal.c | 69 +-
drivers/ipack/devices/ipoctal.h | 2 +-
drivers/ipack/ipack.c | 4 +-
drivers/misc/eeprom/eeprom.c | 23 +-
drivers/misc/genwqe/card_base.c | 38 +-
drivers/misc/genwqe/card_base.h | 21 +-
drivers/misc/genwqe/card_ddcb.c | 77 ++-
drivers/misc/genwqe/card_ddcb.h | 2 +-
drivers/misc/genwqe/card_debugfs.c | 10 +-
drivers/misc/genwqe/card_dev.c | 21 +-
drivers/misc/genwqe/card_sysfs.c | 11 +-
drivers/misc/genwqe/card_utils.c | 7 +-
drivers/misc/genwqe/genwqe_driver.h | 4 +-
drivers/misc/lattice-ecp3-config.c | 1 +
drivers/misc/mei/amthif.c | 167 +++--
drivers/misc/mei/bus.c | 25 +-
drivers/misc/mei/client.c | 237 ++++---
drivers/misc/mei/client.h | 17 +-
drivers/misc/mei/debugfs.c | 70 +-
drivers/misc/mei/hbm.c | 567 +++++++++-------
drivers/misc/mei/hbm.h | 17 +-
drivers/misc/mei/hw-me.c | 194 ++++--
drivers/misc/mei/hw-me.h | 32 +-
drivers/misc/mei/hw-txe.c | 252 ++++---
drivers/misc/mei/hw-txe.h | 6 +-
drivers/misc/mei/hw.h | 74 ++-
drivers/misc/mei/init.c | 107 +--
drivers/misc/mei/interrupt.c | 96 ++-
drivers/misc/mei/main.c | 143 ++--
drivers/misc/mei/mei_dev.h | 279 +++++---
drivers/misc/mei/nfc.c | 77 +--
drivers/misc/mei/pci-me.c | 14 +-
drivers/misc/mei/pci-txe.c | 13 +-
drivers/misc/mei/wd.c | 59 +-
drivers/misc/spear13xx_pcie_gadget.c | 98 +--
drivers/misc/ti-st/st_core.c | 11 +-
drivers/misc/vmw_vmci/vmci_datagram.c | 3 +-
drivers/parport/parport_pc.c | 54 +-
include/linux/extcon/extcon-gpio.h | 4 +-
include/linux/ipack.h | 24 +-
include/linux/mei_cl_bus.h | 1 +
include/linux/ti_wilink_st.h | 2 +-
include/uapi/linux/genwqe/genwqe_card.h | 2 +-
include/uapi/linux/hyperv.h | 2 +-
63 files changed, 2794 insertions(+), 1345 deletions(-)
create mode 100644 Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
create mode 100644 drivers/extcon/extcon-rt8973a.c
create mode 100644 drivers/extcon/extcon-rt8973a.h
rename include/linux/extcon/sm5502.h => drivers/extcon/extcon-sm5502.h (97%)
reply other threads:[~2014-10-07 22:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141007223353.GA5630@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.