From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena
Date: Thu, 9 Oct 2014 16:08:04 +0200 [thread overview]
Message-ID: <201410091608.04662.marex@denx.de> (raw)
In-Reply-To: <54363AED.3030302@denx.de>
On Thursday, October 09, 2014 at 09:36:13 AM, Stefano Babic wrote:
> Hi Marek,
>
> On 06/10/2014 18:02, Marek Vasut wrote:
> > Add support for the Kosagi Novena board. Currently supported are:
> > - I2C busses
> > - FEC Ethernet
> > - MMC0, MMC1, Booting from MMC
> > - SATA
> > - USB ports
> > - USB Ethernet
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Stefano Babic <sbabic@denx.de>
> > Cc: Sean Cross <xobs@kosagi.com>
> > Cc: Nikolay Dimitrov <picmaster@mail.bg>
> > ---
> >
> > arch/arm/Kconfig | 4 +
> > board/kosagi/novena/Kconfig | 23 ++
> > board/kosagi/novena/Makefile | 11 +
> > board/kosagi/novena/novena.c | 342 +++++++++++++++++++++++
> > board/kosagi/novena/novena_spl.c | 581
> > +++++++++++++++++++++++++++++++++++++++ board/kosagi/novena/setup.cfg
> > | 47 ++++
> > configs/novena_defconfig | 4 +
> > include/configs/imx6_spl.h | 2 +-
> > include/configs/novena.h | 303 ++++++++++++++++++++
> > 9 files changed, 1316 insertions(+), 1 deletion(-)
> > create mode 100644 board/kosagi/novena/Kconfig
> > create mode 100644 board/kosagi/novena/Makefile
> > create mode 100644 board/kosagi/novena/novena.c
> > create mode 100644 board/kosagi/novena/novena_spl.c
> > create mode 100644 board/kosagi/novena/setup.cfg
> > create mode 100644 configs/novena_defconfig
> > create mode 100644 include/configs/novena.h
> >
> > V2: - Drop the tegra_keyboard_init() comment altogether
> >
> > - Immediatelly return from the SD controller probe function on
> > failure - Rename PFUZE100_PMIC to just PFUZE100
> > - Fix the IMX OTP support with CMD_FUSE
> > - Enabling LVDS clock is still in place, since this is coming soon.
> >
> > V3: - Zap rootpath builtin env
> > V4: - Zap the checkpatch issues
> >
> > - Update comments
> >
> > V5: - Don't configure VGEN1
> >
> > - Set FPGA into reset in SPL
> > - Drop ECSPI1 and add ECSPI3 mux
> > - Drop UART1 and add UART3, UART4 muxes
> > - Add separate mux option for the RGMII pins which doesn't set SPEED
> > field - Move the configuration of RGMII after they were configured
> > in GPIO mode
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index 106aed9..4da1923 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -411,6 +411,9 @@ config TARGET_GW_VENTANA
> >
> > config TARGET_HUMMINGBOARD
> >
> > bool "Support hummingboard"
> >
> > +config TARGET_KOSAGI_NOVENA
> > + bool "Support Kosagi Novena"
> > +
> >
> > config TARGET_TQMA6
> >
> > bool "TQ Systems TQMa6 board"
> >
> > @@ -637,6 +640,7 @@ source "board/imx31_phycore/Kconfig"
> >
> > source "board/isee/igep0033/Kconfig"
> > source "board/jornada/Kconfig"
> > source "board/karo/tx25/Kconfig"
> >
> > +source "board/kosagi/novena/Kconfig"
> >
> > source "board/logicpd/imx27lite/Kconfig"
> > source "board/logicpd/imx31_litekit/Kconfig"
> > source "board/mpl/vcma9/Kconfig"
> >
> > diff --git a/board/kosagi/novena/Kconfig b/board/kosagi/novena/Kconfig
> > new file mode 100644
> > index 0000000..4e52be9
> > --- /dev/null
> > +++ b/board/kosagi/novena/Kconfig
> > @@ -0,0 +1,23 @@
> > +if TARGET_KOSAGI_NOVENA
> > +
> > +config SYS_CPU
> > + string
> > + default "armv7"
>
> See http://patchwork.ozlabs.org/patch/397186/.
>
> According to Masahiro, "strings" is not required and can be dropped.
Dropped, thanks!
prev parent reply other threads:[~2014-10-09 14:08 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-06 16:02 [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena Marek Vasut
2014-10-07 9:52 ` Sean Cross
2014-10-07 10:05 ` Marek Vasut
2014-10-07 21:55 ` Nikolay Dimitrov
2014-10-08 7:47 ` Sean Cross
2014-10-08 15:35 ` picmaster at mail.bg
2014-10-08 23:59 ` Marek Vasut
2014-10-09 0:13 ` Nikolay Dimitrov
2014-10-09 0:28 ` Marek Vasut
2014-10-09 1:04 ` Nikolay Dimitrov
2014-10-09 23:13 ` Marek Vasut
2014-10-09 7:31 ` Stefano Babic
2014-10-09 14:08 ` Marek Vasut
2014-10-09 5:32 ` Sean Cross
2014-10-09 5:38 ` Sean Cross
2014-10-09 11:48 ` Nikolay Dimitrov
2014-10-08 23:59 ` Marek Vasut
2014-10-09 7:36 ` Stefano Babic
2014-10-09 14:08 ` Marek Vasut [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201410091608.04662.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.