[U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena

[Marek Vasut <marex@denx.de>]

On Thursday, October 02, 2014 at 08:16:25 AM, Sean Cross wrote:

Hi Sean,

OK on the FPGA bit.

[...]


> >> We just received final boards on Monday.  I will try this out and report
> >> back.
> > 
> > You should try one of the never patches .
> 
> I have built it and gotten it working on Novena.  A few notes:
> 
> USB works, but appears to take a very long time to enumerate.  I suspect
> one of the hubs is still in reset.  It finds the Asix Ethernet device,
> but doesn't find a USB keyboard I have plugged in.  Instead, running
> "usb start" gives "EHCI timed out on TD - token=0x80008c80", and the
> keyboard shows up as "Hub (12 Mb/s, 40mA) -- Lite-On Tech USB 1.1 2 port
> downstream low-p".

I suspect this has to do with the keyboard being USB 1.1 , I see such a
problem with my USB 1.1 keyboard too. USB 2.0 devices do work, right?

I will have to look into this USB 1.1 flub soon.

[...]

Best regards,
Marek Vasut