All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Bryan ODonoghue <pure.logic@nexus-software.ie>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>
Subject: [PATCH 3.14 37/37] serial: 8250: Add Quark X1000 to 8250_pci.c
Date: Mon, 13 Oct 2014 04:24:34 +0200	[thread overview]
Message-ID: <20141013022401.843137955@linuxfoundation.org> (raw)
In-Reply-To: <20141013022400.286360067@linuxfoundation.org>

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryan O'Donoghue <pure.logic@nexus-software.ie>

commit 1ede7dcca3c4fa15a518ab0473126f9c3e621e4c upstream.

Quark X1000 contains two designware derived 8250 serial ports.
Each port has a unique PCI configuration space consisting of
BAR0:UART BAR1:DMA respectively.

Unlike the standard 8250 the register width is 32 bits for RHR,IER etc
The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a
bitrate of up to about 2.76 megabits per second.

This patch enables standard 8250 mode

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1766,6 +1766,7 @@ pci_wch_ch353_setup(struct serial_privat
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
+#define PCI_DEVICE_ID_INTEL_QRK_UART	0x0936
 
 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
@@ -1876,6 +1877,13 @@ static struct pci_serial_quirk pci_seria
 		.subdevice	= PCI_ANY_ID,
 		.setup		= byt_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_QRK_UART,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -2710,6 +2718,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
 	pbn_byt,
+	pbn_qrk,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
 	pbn_brcm_trumanage,
@@ -3456,6 +3465,12 @@ static struct pciserial_board pci_boards
 		.uart_offset	= 0x80,
 		.reg_shift      = 2,
 	},
+	[pbn_qrk] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 2764800,
+		.reg_shift	= 2,
+	},
 	[pbn_omegapci] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 8,
@@ -5150,6 +5165,12 @@ static struct pci_device_id serial_pci_t
 		pbn_byt },
 
 	/*
+	 * Intel Quark x1000
+	 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_qrk },
+	/*
 	 * Cronyx Omega PCI
 	 */
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,



  parent reply	other threads:[~2014-10-13  2:27 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-13  2:23 [PATCH 3.14 00/37] 3.14.22-stable review Greg Kroah-Hartman
2014-10-13  2:23 ` [PATCH 3.14 01/37] netlink: reset network header before passing to taps Greg Kroah-Hartman
2014-10-13  2:23 ` [PATCH 3.14 02/37] rtnetlink: fix VF info size Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 03/37] net: Always untag vlan-tagged traffic on input Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 04/37] myri10ge: check for DMA mapping errors Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 05/37] i40e: Dont stop driver probe when querying DCB config fails Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 06/37] tcp: dont use timestamp from repaired skb-s to calculate RTT (v2) Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 07/37] sit: Fix ipip6_tunnel_lookup device matching criteria Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 08/37] tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced() Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 09/37] tcp: fix ssthresh and undo for consecutive short FRTO episodes Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 10/37] packet: handle too big packets for PACKET_V3 Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 11/37] openvswitch: fix panic with multiple vlan headers Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 12/37] vxlan: fix incorrect initializer in union vxlan_addr Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 13/37] l2tp: fix race while getting PMTU on PPP pseudo-wire Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 14/37] ipv6: fix rtnl locking in setsockopt for anycast and multicast Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 15/37] bonding: fix div by zero while enslaving and transmitting Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 16/37] ipv6: restore the behavior of ipv6_sock_ac_drop() Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 17/37] bridge: Check if vlan filtering is enabled only once Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 18/37] bridge: Fix br_should_learn to check vlan_enabled Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 19/37] net: allow macvlans to move to net namespace Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 20/37] tg3: Work around HW/FW limitations with vlan encapsulated frames Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 21/37] tg3: Allow for recieve of full-size 8021AD frames Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 22/37] xfrm: Generate blackhole routes only from route lookup functions Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 23/37] xfrm: Generate queueing " Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 24/37] macvtap: Fix race between device delete and open Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 25/37] Revert "net/macb: add pinctrl consumer support" Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 26/37] gro: fix aggregation for skb using frag_list Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 27/37] hyperv: Fix a bug in netvsc_start_xmit() Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 28/37] ip6_gre: fix flowi6_proto value in xmit path Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 29/37] team: avoid race condition in scheduling delayed work Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 30/37] sctp: handle association restarts when the socket is closed Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 31/37] tcp: fixing TLPs FIN recovery Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 32/37] USB: Add device quirk for ASUS T100 Base Station keyboard Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 33/37] USB: serial: cp210x: added Ketra N1 wireless interface support Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 34/37] USB: cp210x: add support for Seluxit USB dongle Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 35/37] usb: musb: dsps: kill OTG timer on suspend Greg Kroah-Hartman
2014-10-13  2:24 ` [PATCH 3.14 36/37] crypto: caam - fix addressing of struct member Greg Kroah-Hartman
2014-10-14  8:31   ` Cristian Stoica
2014-10-14  8:38     ` Greg Kroah-Hartman
2014-10-14  8:48       ` Cristian Stoica
2014-10-13  2:24 ` Greg Kroah-Hartman [this message]
2014-10-13 15:18 ` [PATCH 3.14 00/37] 3.14.22-stable review Guenter Roeck
2014-10-13 20:31 ` Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141013022401.843137955@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pure.logic@nexus-software.ie \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.