From: Jeff King <peff@peff.net>
To: git@vger.kernel.org
Cc: Michael Haggerty <mhagger@alum.mit.edu>,
Junio C Hamano <gitster@pobox.com>
Subject: [PATCH v2 02/25] isxdigit: cast input to unsigned char
Date: Wed, 15 Oct 2014 18:34:05 -0400 [thread overview]
Message-ID: <20141015223405.GB25630@peff.net> (raw)
In-Reply-To: <20141015223244.GA25368@peff.net>
Otherwise, callers must do so or risk triggering warnings
-Wchar-subscript (and rightfully so; a signed char might
cause us to use a bogus negative index into the
hexval_table).
While we are dropping the now-unnecessary casts from the
caller in urlmatch.c, we can get rid of similar casts in
actually parsing the hex by using the hexval() helper, which
implicitly casts to unsigned (but note that we cannot
implement isxdigit in terms of hexval(), as it also casts
its return value to unsigned).
Signed-off-by: Jeff King <peff@peff.net>
---
The patch that added more calls to isxdigit later in the series actually
got reworked. So this is purely a cleanup and can be dropped if need be,
though I still think it is an improvement.
git-compat-util.h | 2 +-
urlmatch.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/git-compat-util.h b/git-compat-util.h
index fb41118..44890d5 100644
--- a/git-compat-util.h
+++ b/git-compat-util.h
@@ -677,7 +677,7 @@ extern const unsigned char sane_ctype[256];
#define iscntrl(x) (sane_istest(x,GIT_CNTRL))
#define ispunct(x) sane_istest(x, GIT_PUNCT | GIT_REGEX_SPECIAL | \
GIT_GLOB_SPECIAL | GIT_PATHSPEC_MAGIC)
-#define isxdigit(x) (hexval_table[x] != -1)
+#define isxdigit(x) (hexval_table[(unsigned char)(x)] != -1)
#define tolower(x) sane_case((unsigned char)(x), 0x20)
#define toupper(x) sane_case((unsigned char)(x), 0)
#define is_pathspec_magic(x) sane_istest(x,GIT_PATHSPEC_MAGIC)
diff --git a/urlmatch.c b/urlmatch.c
index 3d4c54b..618d216 100644
--- a/urlmatch.c
+++ b/urlmatch.c
@@ -43,11 +43,11 @@ static int append_normalized_escapes(struct strbuf *buf,
from_len--;
if (ch == '%') {
if (from_len < 2 ||
- !isxdigit((unsigned char)from[0]) ||
- !isxdigit((unsigned char)from[1]))
+ !isxdigit(from[0]) ||
+ !isxdigit(from[1]))
return 0;
- ch = hexval_table[(unsigned char)*from++] << 4;
- ch |= hexval_table[(unsigned char)*from++];
+ ch = hexval(*from++) << 4;
+ ch |= hexval(*from++);
from_len -= 2;
was_esc = 1;
}
--
2.1.2.596.g7379948
next prev parent reply other threads:[~2014-10-15 22:34 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-15 22:32 [PATCH v2 0/25] prune-safety Jeff King
2014-10-15 22:33 ` [PATCH v2 01/25] foreach_alt_odb: propagate return value from callback Jeff King
2014-10-15 22:34 ` Jeff King [this message]
2014-10-16 17:16 ` [PATCH v2 02/25] isxdigit: cast input to unsigned char Junio C Hamano
2014-10-15 22:34 ` [PATCH v2 03/25] object_array: factor out slopbuf-freeing logic Jeff King
2014-10-16 17:39 ` Junio C Hamano
2014-10-17 0:33 ` git-bundle rev handling and de-duping Jeff King
2014-10-17 21:03 ` Philip Oakley
2014-10-17 22:41 ` Junio C Hamano
2014-10-15 22:34 ` [PATCH v2 04/25] object_array: add a "clear" function Jeff King
2014-10-15 22:35 ` [PATCH v2 05/25] clean up name allocation in prepare_revision_walk Jeff King
2014-10-15 22:37 ` [PATCH v2 06/25] reachable: use traverse_commit_list instead of custom walk Jeff King
2014-10-16 17:53 ` Junio C Hamano
2014-10-15 22:38 ` [PATCH v2 07/25] reachable: reuse revision.c "add all reflogs" code Jeff King
2014-10-15 22:38 ` [PATCH v2 08/25] prune: factor out loose-object directory traversal Jeff King
2014-10-15 22:40 ` [PATCH v2 09/25] reachable: mark index blobs as SEEN Jeff King
2014-10-15 22:40 ` [PATCH v2 10/25] prune-packed: use for_each_loose_file_in_objdir Jeff King
2014-10-15 22:40 ` [PATCH v2 11/25] count-objects: do not use xsize_t when counting object size Jeff King
2014-10-15 22:41 ` [PATCH v2 12/25] count-objects: use for_each_loose_file_in_objdir Jeff King
2014-10-15 22:41 ` [PATCH v2 13/25] sha1_file: add for_each iterators for loose and packed objects Jeff King
2014-10-15 22:41 ` [PATCH v2 14/25] prune: keep objects reachable from recent objects Jeff King
2014-10-15 22:41 ` [PATCH v2 15/25] pack-objects: refactor unpack-unreachable expiration check Jeff King
2014-10-15 22:42 ` [PATCH v2 16/25] pack-objects: match prune logic for discarding objects Jeff King
2014-10-15 22:42 ` [PATCH v2 17/25] write_sha1_file: freshen existing objects Jeff King
2014-10-15 22:42 ` [PATCH v2 18/25] make add_object_array_with_context interface more sane Jeff King
2014-10-15 22:43 ` [PATCH v2 19/25] traverse_commit_list: support pending blobs/trees with paths Jeff King
2014-10-15 22:43 ` [PATCH v2 20/25] rev-list: document --reflog option Jeff King
2014-10-15 22:44 ` [PATCH v2 21/25] rev-list: add --index-objects option Jeff King
2014-10-16 18:41 ` Junio C Hamano
2014-10-17 0:12 ` Jeff King
2014-10-17 0:43 ` Jeff King
2014-10-17 0:44 ` [PATCH v3 22/26] rev-list: add --indexed-objects option Jeff King
2014-10-17 0:44 ` [PATCH v3 23/26] reachable: use revision machinery's --indexed-objects code Jeff King
2014-10-17 0:44 ` [PATCH v3 24/26] pack-objects: use argv_array Jeff King
2014-10-17 0:44 ` [PATCH v3 25/26] repack: pack objects mentioned by the index Jeff King
2014-10-17 0:44 ` [PATCH v3 26/26] pack-objects: double-check options before discarding objects Jeff King
2014-10-15 22:44 ` [PATCH v2 22/25] reachable: use revision machinery's --index-objects code Jeff King
2014-10-15 22:45 ` [PATCH v2 23/25] pack-objects: use argv_array Jeff King
2014-10-15 22:46 ` [PATCH v2 24/25] repack: pack objects mentioned by the index Jeff King
2014-10-15 22:48 ` [PATCH v2 25/25] pack-objects: double-check options before discarding objects Jeff King
2014-10-16 21:07 ` [PATCH v2 0/25] prune-safety Junio C Hamano
2014-10-16 21:10 ` Junio C Hamano
2014-10-16 21:21 ` Jeff King
2014-10-16 21:39 ` Jeff King
2014-10-16 22:18 ` Junio C Hamano
2014-10-17 0:03 ` Jeff King
[not found] ` <CAPc5daX0AFv9jDrFyd_OnupW5AfZW9Je_rgzaViX_xxs3SG5zg@mail.gmail.com>
2014-10-17 4:49 ` Jeff King
2014-10-18 12:31 ` Jeff King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141015223405.GB25630@peff.net \
--to=peff@peff.net \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=mhagger@alum.mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.