From: Marc Kleine-Budde <mkl@pengutronix.de>
To: David Jander <david@protonic.nl>
Cc: Wolfgang Grandegger <wg@grandegger.com>,
linux-can@vger.kernel.org,
Alexander Stein <alexander.stein@systec-electronic.com>
Subject: Re: [PATCH 08/15] can: rx-fifo: fix long lines
Date: Sun, 19 Oct 2014 23:18:03 +0200 [thread overview]
Message-ID: <20141019211803.GA428@pengutronix.de> (raw)
In-Reply-To: <1412956020-21489-9-git-send-email-david@protonic.nl>
On Fri, Oct 10, 2014 at 05:46:53PM +0200, David Jander wrote:
> Signed-off-by: David Jander <david@protonic.nl>
> ---
> drivers/net/can/dev.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
> index 22a3955..3e1160a 100644
> --- a/drivers/net/can/dev.c
> +++ b/drivers/net/can/dev.c
> @@ -301,17 +301,21 @@ static unsigned int can_rx_fifo_inc(struct can_rx_fifo *fifo, unsigned int *val)
> static u64 can_rx_fifo_mask_low(struct can_rx_fifo *fifo)
> {
> if (fifo->inc)
> - return ~0LLU >> (64 + fifo->low_first - fifo->high_first) << fifo->low_first;
> + return ~0LLU >> (64 + fifo->low_first - fifo->high_first)
> + << fifo->low_first;
In the kernel, a line usually doesn't start with an operator. Please keep it in
the original line.
> else
> - return ~0LLU >> (64 - fifo->low_first + fifo->high_first) << (fifo->high_first + 1);
> + return ~0LLU >> (64 - fifo->low_first + fifo->high_first)
> + << (fifo->high_first + 1);
> }
>
> static u64 can_rx_fifo_mask_high(struct can_rx_fifo *fifo)
> {
> if (fifo->inc)
> - return ~0LLU >> (64 + fifo->high_first - fifo->high_last - 1) << fifo->high_first;
> + return ~0LLU >> (64 + fifo->high_first - fifo->high_last - 1)
> + << fifo->high_first;
> else
> - return ~0LLU >> (64 - fifo->high_first + fifo->high_last - 1) << fifo->high_last;
> + return ~0LLU >> (64 - fifo->high_first + fifo->high_last - 1)
> + << fifo->high_last;
> }
>
> static int can_rx_fifo_read_napi_frame(struct can_rx_fifo *fifo, int index)
Marc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2014-10-19 21:18 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-10 15:46 [RFC PATCH V3 00/15] CAN: Add rx-fifo support and port flexcan to it David Jander
2014-10-10 15:46 ` [PATCH 01/15] can: flexcan: add documentation about mailbox organizaiton David Jander
2014-10-10 15:46 ` [PATCH 02/15] can: flexcan: rename crl2 -> ctrl2 David Jander
2014-10-10 15:46 ` [PATCH 03/15] can: flexcan: replace open coded mailbox code by proper defines David Jander
2014-10-10 15:46 ` [PATCH 04/15] can: flexcan: Re-write receive path to use MB queue instead of FIFO David Jander
2014-10-10 15:46 ` [PATCH 05/15] can: dev: add preliminary rx-fifo David Jander
2014-10-10 15:46 ` [PATCH 06/15] can: rx-fifo: Increase MB size limit from 32 to 64 David Jander
2014-10-19 21:25 ` Marc Kleine-Budde
2014-10-20 6:14 ` David Jander
2014-10-10 15:46 ` [PATCH 07/15] can: rx-fifo: Change to do controller off-load in interrupt and NAPI poll David Jander
2014-10-19 22:09 ` Marc Kleine-Budde
2014-10-20 7:06 ` David Jander
2014-11-03 11:10 ` Marc Kleine-Budde
2014-11-03 12:44 ` David Jander
2014-10-10 15:46 ` [PATCH 08/15] can: rx-fifo: fix long lines David Jander
2014-10-19 21:18 ` Marc Kleine-Budde [this message]
2014-10-20 7:09 ` David Jander
2014-10-10 15:46 ` [PATCH 09/15] can: rx-fifo: Add can_rx_fifo_reset() function David Jander
2014-11-03 11:16 ` Marc Kleine-Budde
2014-11-03 12:46 ` David Jander
2014-11-03 12:51 ` Marc Kleine-Budde
2014-10-10 15:46 ` [PATCH 10/15] can: rx-fifo: remove obsolete comment David Jander
2014-10-10 15:46 ` [PATCH 11/15] can: rx-fifo: Add support for can state tracking and error polling David Jander
2014-11-03 11:24 ` Marc Kleine-Budde
2014-11-03 12:51 ` David Jander
2014-11-03 12:58 ` Marc Kleine-Budde
2014-11-03 13:09 ` David Jander
2014-11-03 13:24 ` Marc Kleine-Budde
2014-11-05 17:16 ` David Jander
2014-11-06 10:20 ` Marc Kleine-Budde
2014-11-06 11:07 ` David Jander
2014-10-10 15:46 ` [PATCH 12/15] can: flexcan: Add support for RX-FIFO David Jander
2014-11-03 11:26 ` Marc Kleine-Budde
2014-11-03 12:55 ` David Jander
2014-11-03 13:34 ` Marc Kleine-Budde
2014-10-10 15:46 ` [PATCH 13/15] can: rx-fifo: Add support for simple irq offloading David Jander
2014-11-03 11:59 ` Marc Kleine-Budde
2014-10-10 15:46 ` [PATCH 14/15] can: flexcan: Add MB/Fifo specific column to comment table of IP versions David Jander
2014-10-10 15:47 ` [PATCH 15/15] can: flexcan: Re-enable RTR reception support for older flexcan IPs David Jander
2014-11-03 12:02 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141019211803.GA428@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=alexander.stein@systec-electronic.com \
--cc=david@protonic.nl \
--cc=linux-can@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.