From: "Nibble Max" <nibble.max@gmail.com>
To: "Antti Palosaari" <crope@iki.fi>
Cc: "linux-media" <linux-media@vger.kernel.org>,
"Olli Salonen" <olli.salonen@iki.fi>
Subject: [PATCH 2/2] cx23885: add DVBSky S950C and T980C RC support
Date: Thu, 23 Oct 2014 18:02:16 +0800 [thread overview]
Message-ID: <201410231802135463883@gmail.com> (raw)
DVBSky s950ci dvb-s/s2 ci PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>ci controller: CIMAX SP2 or its clone.
3>PCIe bridge: CX23885
The patchs are based on the following patchs.
Olli Salonen submit:
https://patchwork.linuxtv.org/patch/26180/
https://patchwork.linuxtv.org/patch/26183/
https://patchwork.linuxtv.org/patch/26324/
Nibble Max submit:
https://patchwork.linuxtv.org/patch/26207/
Signed-off-by: Nibble Max <nibble.max@gmail.com>
---
drivers/media/pci/cx23885/cx23885-cards.c | 6 ++++++
drivers/media/pci/cx23885/cx23885-input.c | 6 ++++++
2 files changed, 12 insertions(+)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index ac34c27..d9ba48c 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -1669,6 +1669,8 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1716,6 +1718,8 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
@@ -1764,6 +1768,8 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index f81c2f9..0bf6839 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -88,6 +88,8 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
/*
* The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
@@ -141,6 +143,8 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -308,6 +312,8 @@ int cx23885_input_init(struct cx23885_dev *dev)
rc_map = RC_MAP_TBS_NEC;
break;
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
--
1.9.1
next reply other threads:[~2014-10-23 10:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-23 10:02 Nibble Max [this message]
2014-10-30 19:39 ` [PATCH 2/2] cx23885: add DVBSky S950C and T980C RC support Olli Salonen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201410231802135463883@gmail.com \
--to=nibble.max@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=olli.salonen@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.