[U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure

[Tom Rini <trini@ti.com>]

On Thu, Oct 23, 2014 at 06:58:47PM -0600, Simon Glass wrote:

> This function can fail if the device tree runs out of space. Rather than
> silently booting with an incomplete device tree, allow the failure to be
> detected.
> 
> Unfortunately this involves changing a lot of places in the code. I have
> not changed behvaiour to return an error where one is not currently
> returned, to avoid unexpected breakage.
> 
> Eventually it would be nice to allow boards to register functions to be
> called to update the device tree. This would avoid all the many functions
> to do this. However it's not clear yet if this should be done using driver
> model or with a linker list. This work is left for later.
[snip]
> diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
> index aba4f53..19fef50 100644
> --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
> +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
> @@ -6,6 +6,7 @@
>  
>  #include <common.h>
>  #include <command.h>
> +#include <errno.h>
>  #include <asm/processor.h>
>  #include <asm/mmu.h>
>  #include <asm/cache.h>
> @@ -234,7 +235,7 @@ int board_eth_init(bd_t *bis)
>  #if defined(CONFIG_OF_BOARD_SETUP)
>  extern void ft_pci_board_setup(void *blob);
>  
> -void ft_board_setup(void *blob, bd_t *bd)
> +int ft_board_setup(void *blob, bd_t *bd)
>  {
>  	const char *soc_usb_compat = "fsl-usb2-dr";
>  	int err, usb1_off, usb2_off;
> @@ -263,39 +264,41 @@ void ft_board_setup(void *blob, bd_t *bd)
>  		int off = fdt_node_offset_by_compatible(blob, -1,
>  			soc_elbc_compat);
>  		if (off < 0) {
> -			printf("WARNING: could not find compatible node"
> -				" %s: %s.\n", soc_elbc_compat,
> -				fdt_strerror(off));
> -				return;
> +			printf("WARNING: could not find compatible node %s\n",
> +			       soc_elbc_compat);
> +			return off;
>  		}
>  		err = fdt_del_node(blob, off);
>  		if (err < 0) {
> -			printf("WARNING: could not remove %s: %s.\n",
> -				soc_elbc_compat, fdt_strerror(err));
> +			printf("WARNING: could not remove %s\n",
> +			       soc_elbc_compat);
> +			return err;
>  		}
> -		return;
> +		return 0;
>  	}
>  #endif
>  	/* Delete USB2 node as it is muxed with eLBC */
>  	usb1_off = fdt_node_offset_by_compatible(blob, -1,
>  		soc_usb_compat);
>  	if (usb1_off < 0) {
> -		printf("WARNING: could not find compatible node"
> -			" %s: %s.\n", soc_usb_compat,
> -			fdt_strerror(usb1_off));
> -		return;
> +		printf("WARNING: could not find compatible node %s\n",
> +		       soc_usb_compat);
> +		return usb1_off;
>  	}
>  	usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
>  			soc_usb_compat);
>  	if (usb2_off < 0) {
> -		printf("WARNING: could not find compatible node"
> -			" %s: %s.\n", soc_usb_compat,
> -			fdt_strerror(usb2_off));
> -		return;
> +		printf("WARNING: could not find compatible node %s\n",
> +		       soc_usb_compat);
> +		return usb2_off;
>  	}
>  	err = fdt_del_node(blob, usb2_off);
> -	if (err < 0)
> -		printf("WARNING: could not remove %s: %s.\n",
> -			soc_usb_compat, fdt_strerror(err));
> +	if (err < 0) {
> +		printf("WARNING: could not remove %s\n", soc_usb_compat);
> +		return err;
> +	}
> +
> +	return 0;
>  }
> +
>  #endif
> diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> index a6756c6..66bc041 100644
> --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> @@ -6,6 +6,7 @@
>  
>  #include <common.h>
>  #include <command.h>
> +#include <errno.h>
>  #include <hwconfig.h>
>  #include <pci.h>
>  #include <i2c.h>
> @@ -424,7 +425,7 @@ static void fdt_board_fixup_qe_pins(void *blob)
>  #endif
>  
>  #ifdef CONFIG_OF_BOARD_SETUP
> -void ft_board_setup(void *blob, bd_t *bd)
> +int ft_board_setup(void *blob, bd_t *bd)
>  {
>  	phys_addr_t base;
>  	phys_size_t size;
> @@ -459,17 +460,17 @@ void ft_board_setup(void *blob, bd_t *bd)
>  		int off = fdt_node_offset_by_compatible(blob, -1,
>  				soc_elbc_compat);
>  		if (off < 0) {
> -			printf("WARNING: could not find compatible node %s: %s.\n",
> -			       soc_elbc_compat,
> -			       fdt_strerror(off));
> -				return;
> +			printf("WARNING: could not find compatible node %s\n",
> +			       soc_elbc_compat);
> +			return off;
>  		}
>  		err = fdt_del_node(blob, off);
>  		if (err < 0) {
> -			printf("WARNING: could not remove %s: %s.\n",
> -			       soc_elbc_compat, fdt_strerror(err));
> +			printf("WARNING: could not remove %s\n",
> +			       soc_elbc_compat);
> +			return err;
>  		}
> -		return;
> +		return 0;
>  	}
>  #endif
>  
> @@ -477,24 +478,23 @@ void ft_board_setup(void *blob, bd_t *bd)
>  	usb1_off = fdt_node_offset_by_compatible(blob, -1,
>  		soc_usb_compat);
>  	if (usb1_off < 0) {
> -		printf("WARNING: could not find compatible node %s: %s.\n",
> -		       soc_usb_compat,
> -		       fdt_strerror(usb1_off));
> -		return;
> +		printf("WARNING: could not find compatible node %s\n",
> +		       soc_usb_compat);
> +		return usb1_off;
>  	}
>  	usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
>  			soc_usb_compat);
>  	if (usb2_off < 0) {
> -		printf("WARNING: could not find compatible node %s: %s.\n",
> -		       soc_usb_compat,
> -		       fdt_strerror(usb2_off));
> -		return;
> +		printf("WARNING: could not find compatible node %s\n",
> +		       soc_usb_compat);
> +		return usb2_off;
>  	}
>  	err = fdt_del_node(blob, usb2_off);
>  	if (err < 0) {
> -		printf("WARNING: could not remove %s: %s.\n",
> -		       soc_usb_compat, fdt_strerror(err));
> +		printf("WARNING: could not remove %s\n", soc_usb_compat);
> +		return err;
>  	}
>  
> +	return 0;
>  }
>  #endif

In both of these boards you add <errno.h> but don't make use of it, did
you intend to make something return -FDT_ERR_NOTFOUND and then not need
to after all?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141024/c914842f/attachment-0001.pgp>