From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
To: Paul McQuade <paulmcquad@gmail.com>
Cc: linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
linux-wireless@vger.kernel.org, gregkh@linuxfoundation.org,
Jes.Sorensen@redhat.com, Larry.Finger@lwfinger.net
Subject: Re: [PATCH] Staging:rtl8723au: open/closed brace issue
Date: Sat, 25 Oct 2014 10:15:30 +0530 [thread overview]
Message-ID: <20141025044530.GA2981@sudip-PC> (raw)
In-Reply-To: <1414195513-12670-1-git-send-email-paulmcquad@gmail.com>
On Sat, Oct 25, 2014 at 01:05:13AM +0100, Paul McQuade wrote:
> ERROR: that open brace { should be on the previous line
>
> Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
> ---
> drivers/staging/rtl8723au/core/rtw_ap.c | 130 ++++++++++----------------------
> 1 file changed, 40 insertions(+), 90 deletions(-)
>
> diff --git a/drivers/staging/rtl8723au/core/rtw_ap.c b/drivers/staging/rtl8723au/core/rtw_ap.c
> index 6b4092f..6b69bfe 100644
> --- a/drivers/staging/rtl8723au/core/rtw_ap.c
> +++ b/drivers/staging/rtl8723au/core/rtw_ap.c
> @@ -231,12 +231,10 @@ void expire_timeout_chk23a(struct rtw_adapter *padapter)
> psta->expire_to--;
> }
>
> - if (psta->expire_to <= 0)
> - {
> + if (psta->expire_to <= 0) {
> struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
>
> - if (padapter->registrypriv.wifi_spec == 1)
> - {
> + if (padapter->registrypriv.wifi_spec == 1) {
> psta->expire_to = pstapriv->expire_to;
> continue;
> }
> @@ -308,15 +306,13 @@ void expire_timeout_chk23a(struct rtw_adapter *padapter)
> ret = issue_nulldata23a(padapter, psta->hwaddr, 0, 3, 50);
>
> psta->keep_alive_trycnt++;
> - if (ret == _SUCCESS)
> - {
> + if (ret == _SUCCESS) {
> DBG_8723A("asoc check, sta(" MAC_FMT ") is alive\n", MAC_ARG(psta->hwaddr));
> psta->expire_to = pstapriv->expire_to;
> psta->keep_alive_trycnt = 0;
> continue;
> - }
> - else if (psta->keep_alive_trycnt <= 3)
> - {
> +
> + } else if (psta->keep_alive_trycnt <= 3) {
> DBG_8723A("ack check for asoc expire, keep_alive_trycnt =%d\n", psta->keep_alive_trycnt);
> psta->expire_to = 1;
> continue;
> @@ -363,8 +359,7 @@ void add_RATid23a(struct rtw_adapter *padapter, struct sta_info *psta, u8 rssi_l
> return;
>
> /* b/g mode ra_bitmap */
> - for (i = 0; i < sizeof(psta->bssrateset); i++)
> - {
> + for (i = 0; i < sizeof(psta->bssrateset); i++) {
> if (psta->bssrateset[i])
> tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value23a(psta->bssrateset[i]&0x7f);
> }
> @@ -406,8 +401,7 @@ void add_RATid23a(struct rtw_adapter *padapter, struct sta_info *psta, u8 rssi_l
> raid = networktype_to_raid23a(sta_band);
> init_rate = get_highest_rate_idx23a(tx_ra_bitmap&0x0fffffff)&0x3f;
>
> - if (psta->aid < NUM_STA)
> - {
> + if (psta->aid < NUM_STA) {
> u8 arg = 0;
>
> arg = psta->mac_id&0x1f;
> @@ -436,9 +430,7 @@ void add_RATid23a(struct rtw_adapter *padapter, struct sta_info *psta, u8 rssi_l
> psta->raid = raid;
> psta->init_rate = init_rate;
>
> - }
> - else
> - {
> + } else {
> DBG_8723A("station aid %d exceed the max number\n", psta->aid);
> }
> }
> @@ -474,8 +466,7 @@ static void update_bmc_sta(struct rtw_adapter *padapter)
> psta->bssratelen = supportRateNum;
>
> /* b/g mode ra_bitmap */
> - for (i = 0; i < supportRateNum; i++)
> - {
> + for (i = 0; i < supportRateNum; i++) {
> if (psta->bssrateset[i])
> tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value23a(psta->bssrateset[i]&0x7f);
> }
> @@ -522,9 +513,7 @@ static void update_bmc_sta(struct rtw_adapter *padapter)
> psta->state = _FW_LINKED;
> spin_unlock_bh(&psta->lock);
>
> - }
> - else
> - {
> + } else {
> DBG_8723A("add_RATid23a_bmc_sta error!\n");
> }
> }
> @@ -561,8 +550,7 @@ void update_sta_info23a_apmode23a(struct rtw_adapter *padapter, struct sta_info
> /* ERP */
> VCS_update23a(padapter, psta);
> /* HT related cap */
> - if (phtpriv_sta->ht_option)
> - {
> + if (phtpriv_sta->ht_option) {
> /* check if sta supports rx ampdu */
> phtpriv_sta->ampdu_enable = phtpriv_ap->ampdu_enable;
>
> @@ -580,9 +568,7 @@ void update_sta_info23a_apmode23a(struct rtw_adapter *padapter, struct sta_info
>
> psta->qos_option = true;
>
> - }
> - else
> - {
> + } else {
> phtpriv_sta->ampdu_enable = false;
>
> phtpriv_sta->sgi = false;
> @@ -1261,8 +1247,7 @@ void update_beacon23a(struct rtw_adapter *padapter, u8 ie_id, u8 *oui, u8 tx)
>
> spin_lock_bh(&pmlmepriv->bcn_update_lock);
>
> - switch (ie_id)
> - {
> + switch (ie_id) {
> case 0xFF:
> /* 8: TimeStamp, 2: Beacon Interval 2:Capability */
> update_bcn_fixed_ie(padapter);
> @@ -1416,110 +1401,85 @@ void bss_cap_update_on_sta_join23a(struct rtw_adapter *padapter, struct sta_info
> struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
> struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
>
> - if (!(psta->flags & WLAN_STA_SHORT_PREAMBLE))
> - {
> - if (!psta->no_short_preamble_set)
> - {
> + if (!(psta->flags & WLAN_STA_SHORT_PREAMBLE)) {
> + if (!psta->no_short_preamble_set) {
> psta->no_short_preamble_set = 1;
>
> pmlmepriv->num_sta_no_short_preamble++;
>
> if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) &&
> - (pmlmepriv->num_sta_no_short_preamble == 1))
> - {
> + (pmlmepriv->num_sta_no_short_preamble == 1)) {
> beacon_updated = true;
> update_beacon23a(padapter, 0xFF, NULL, true);
> }
>
> }
> - }
> - else
> - {
> - if (psta->no_short_preamble_set)
> - {
> + } else {
> + if (psta->no_short_preamble_set) {
> psta->no_short_preamble_set = 0;
>
> pmlmepriv->num_sta_no_short_preamble--;
>
> if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) &&
> - (pmlmepriv->num_sta_no_short_preamble == 0))
> - {
> + (pmlmepriv->num_sta_no_short_preamble == 0)) {
> beacon_updated = true;
> update_beacon23a(padapter, 0xFF, NULL, true);
> }
> -
> }
> }
>
> - if (psta->flags & WLAN_STA_NONERP)
> - {
> - if (!psta->nonerp_set)
> - {
> + if (psta->flags & WLAN_STA_NONERP) {
> + if (!psta->nonerp_set) {
> psta->nonerp_set = 1;
>
> pmlmepriv->num_sta_non_erp++;
>
> - if (pmlmepriv->num_sta_non_erp == 1)
> - {
> + if (pmlmepriv->num_sta_non_erp == 1) {
> beacon_updated = true;
> update_beacon23a(padapter, WLAN_EID_ERP_INFO, NULL, true);
> }
> }
>
> - }
> - else
> - {
> - if (psta->nonerp_set)
> - {
> + } else {
> + if (psta->nonerp_set) {
> psta->nonerp_set = 0;
>
> pmlmepriv->num_sta_non_erp--;
>
> - if (pmlmepriv->num_sta_non_erp == 0)
> - {
> + if (pmlmepriv->num_sta_non_erp == 0) {
> beacon_updated = true;
> update_beacon23a(padapter, WLAN_EID_ERP_INFO, NULL, true);
> }
> }
> -
> }
>
> - if (!(psta->capability & WLAN_CAPABILITY_SHORT_SLOT_TIME))
> - {
> - if (!psta->no_short_slot_time_set)
> - {
> + if (!(psta->capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)) {
> + if (!psta->no_short_slot_time_set) {
> psta->no_short_slot_time_set = 1;
>
> pmlmepriv->num_sta_no_short_slot_time++;
>
> if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) &&
> - (pmlmepriv->num_sta_no_short_slot_time == 1))
> - {
> + (pmlmepriv->num_sta_no_short_slot_time == 1)) {
> beacon_updated = true;
> update_beacon23a(padapter, 0xFF, NULL, true);
> }
> -
> }
> - }
> - else
> - {
> - if (psta->no_short_slot_time_set)
> - {
> + } else {
> + if (psta->no_short_slot_time_set) {
> psta->no_short_slot_time_set = 0;
>
> pmlmepriv->num_sta_no_short_slot_time--;
>
> if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) &&
> - (pmlmepriv->num_sta_no_short_slot_time == 0))
> - {
> + (pmlmepriv->num_sta_no_short_slot_time == 0)) {
> beacon_updated = true;
> update_beacon23a(padapter, 0xFF, NULL, true);
> }
> }
> }
>
> - if (psta->flags & WLAN_STA_HT)
> - {
> + if (psta->flags & WLAN_STA_HT) {
> u16 ht_capab = le16_to_cpu(psta->htpriv.ht_cap.cap_info);
>
> DBG_8723A("HT: STA " MAC_FMT " HT Capabilities "
> @@ -1552,9 +1512,7 @@ void bss_cap_update_on_sta_join23a(struct rtw_adapter *padapter, struct sta_info
> pmlmepriv->num_sta_ht_20mhz);
> }
>
> - }
> - else
> - {
> + } else {
> if (!psta->no_ht_set) {
> psta->no_ht_set = 1;
> pmlmepriv->num_sta_no_ht++;
> @@ -1567,8 +1525,7 @@ void bss_cap_update_on_sta_join23a(struct rtw_adapter *padapter, struct sta_info
> }
> }
>
> - if (rtw_ht_operation_update(padapter) > 0)
> - {
> + if (rtw_ht_operation_update(padapter) > 0) {
> update_beacon23a(padapter, WLAN_EID_HT_CAPABILITY, NULL, false);
> update_beacon23a(padapter, WLAN_EID_HT_OPERATION, NULL, true);
> }
> @@ -1592,8 +1549,7 @@ u8 bss_cap_update_on_sta_leave23a(struct rtw_adapter *padapter, struct sta_info
> psta->no_short_preamble_set = 0;
> pmlmepriv->num_sta_no_short_preamble--;
> if (pmlmeext->cur_wireless_mode > WIRELESS_11B
> - && pmlmepriv->num_sta_no_short_preamble == 0)
> - {
> + && pmlmepriv->num_sta_no_short_preamble == 0) {
Logical continuations should be on the previous line (from checkpatch with --strict option)
> beacon_updated = true;
> update_beacon23a(padapter, 0xFF, NULL, true);
> }
> @@ -1602,8 +1558,7 @@ u8 bss_cap_update_on_sta_leave23a(struct rtw_adapter *padapter, struct sta_info
> if (psta->nonerp_set) {
> psta->nonerp_set = 0;
> pmlmepriv->num_sta_non_erp--;
> - if (pmlmepriv->num_sta_non_erp == 0)
> - {
> + if (pmlmepriv->num_sta_non_erp == 0) {
> beacon_updated = true;
> update_beacon23a(padapter, WLAN_EID_ERP_INFO,
> NULL, true);
> @@ -1657,8 +1612,7 @@ u8 ap_free_sta23a(struct rtw_adapter *padapter, struct sta_info *psta, bool acti
> if (!psta)
> return beacon_updated;
>
> - if (active == true)
> - {
> + if (active == true) {
> /* tear down Rx AMPDU */
> send_delba23a(padapter, 0, psta->hwaddr);/* recipient */
>
> @@ -1788,13 +1742,10 @@ void sta_info_update23a(struct rtw_adapter *padapter, struct sta_info *psta)
> psta->qos_option = 0;
>
> /* update 802.11n ht cap. */
> - if (WLAN_STA_HT&flags)
> - {
> + if (WLAN_STA_HT&flags) {
> psta->htpriv.ht_option = true;
> psta->qos_option = 1;
> - }
> - else
> - {
> + } else {
> psta->htpriv.ht_option = false;
> }
>
> @@ -1807,8 +1758,7 @@ void sta_info_update23a(struct rtw_adapter *padapter, struct sta_info *psta)
> /* called >= TSR LEVEL for USB or SDIO Interface*/
> void ap_sta_info_defer_update23a(struct rtw_adapter *padapter, struct sta_info *psta)
> {
> - if (psta->state & _FW_LINKED)
> - {
> + if (psta->state & _FW_LINKED) {
> /* add ratid */
> add_RATid23a(padapter, psta, 0);/* DM_RATR_STA_INIT */
> }
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
prev parent reply other threads:[~2014-10-25 18:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-25 0:05 [PATCH] Staging:rtl8723au: open/closed brace issue Paul McQuade
2014-10-25 4:45 ` Sudip Mukherjee [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141025044530.GA2981@sudip-PC \
--to=sudipm.mukherjee@gmail.com \
--cc=Jes.Sorensen@redhat.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=paulmcquad@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.