From mboxrd@z Thu Jan  1 00:00:00 1970
From: Magnus Damm <magnus.damm@gmail.com>
Date: Wed, 29 Oct 2014 07:47:17 +0000
Subject: [PATCH 03/03] ARM: shmobile: mackerel: Remove legacy board support
Message-Id: <20141029074717.405.8623.sendpatchset@w520>
List-Id: <linux-sh.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-sh@vger.kernel.org

From: Magnus Damm <damm+renesas@opensource.se>

Remove old sh7372 Mackerel board support. The sh7372
SoC never went to mass production anyway and the few
Mackerel boards that still exist do not support DT due
to lack of DT bindings for the interrupt controller.

Anyone wanting to play with old hardware can focus on
EMEV2, sh73a0 or r8a7740 instead.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 arch/arm/mach-shmobile/Kconfig                        |    9 
 arch/arm/mach-shmobile/Makefile                       |    1 
 arch/arm/mach-shmobile/Makefile.boot                  |    1 
 arch/arm/mach-shmobile/board-mackerel.c               | 1522 -----------------
 arch/arm/mach-shmobile/include/mach/head-mackerel.txt |   93 -
 arch/arm/mach-shmobile/include/mach/mmc-mackerel.h    |   38 
 arch/arm/mach-shmobile/include/mach/mmc.h             |    5 
 arch/arm/mach-shmobile/include/mach/zboot.h           |    5 
 8 files changed, 1 insertion(+), 1673 deletions(-)

--- 0004/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig	2014-10-29 16:16:04.000000000 +0900
@@ -155,15 +155,6 @@ config MACH_APE6EVM_REFERENCE
 
 	   This is intended to aid developers
 
-config MACH_MACKEREL
-	bool "mackerel board"
-	depends on ARCH_SH7372
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SMSC911X
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select USE_OF
-
 config MACH_ARMADILLO800EVA
 	bool "Armadillo-800 EVA board"
 	depends on ARCH_R8A7740
--- 0004/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2014-10-29 16:15:46.000000000 +0900
@@ -60,7 +60,6 @@ obj-$(CONFIG_MACH_MARZEN)	+= board-marze
 else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
-obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
--- 0004/arch/arm/mach-shmobile/Makefile.boot
+++ work/arch/arm/mach-shmobile/Makefile.boot	2014-10-29 16:16:14.000000000 +0900
@@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
-loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 
 __ZRELADDR	:= $(sort $(loadaddr-y))
--- 0001/arch/arm/mach-shmobile/board-mackerel.c
+++ /dev/null	2013-06-03 21:41:10.638032047 +0900
@@ -1,1522 +0,0 @@
-/*
- * mackerel board support
- *
- * Copyright (C) 2010 Renesas Solutions Corp.
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on ap4evb
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_data/gpio_backlight.h>
-#include <linux/pm_clock.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/sh_clk.h>
-#include <linux/tca6416_keypad.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/dma-mapping.h>
-
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <media/soc_camera_platform.h>
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "intc.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "sh-gpio.h"
-#include "sh7372.h"
-
-/*
- * Address	Interface		BusWidth	note
- * ------------------------------------------------------------------
- * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
- * 0x0800_0000	user area		-
- * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
- * 0x1400_0000	Ether (LAN9220)		16bit
- * 0x1600_0000	user area		-		cannot use with NAND
- * 0x1800_0000	user area		-
- * 0x1A00_0000	-
- * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
- */
-
-/*
- * CPU mode
- *
- * SW4                                     | Boot Area| Master   | Remarks
- *  1  | 2   | 3   | 4   | 5   | 6   | 8   |          | Processor|
- * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
- * ON  | ON  | OFF | ON  | ON  | OFF | OFF | External | System   | External ROM
- * ON  | ON  | ON  | ON  | ON  | OFF | OFF | External | System   | ROM Debug
- * ON  | ON  | X   | ON  | OFF | OFF | OFF | Built-in | System   | ROM Debug
- * X   | OFF | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
- * OFF | X   | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
- * X   | X   | X   | OFF | X   | X   | OFF | Built-in | System   | MaskROM
- * OFF | ON  | OFF | X   | X   | OFF | ON  | External | System   | Standalone
- * ON  | OFF | OFF | X   | X   | OFF | ON  | External | Realtime | Standalone
-*/
-
-/*
- * NOR Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NOR Flash ROM
- *  bit1 | bit1  bit2 | bit1 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    Area 0
- *  OFF  | ON     OFF | OFF  |    Area 4
- */
-
-/*
- * SMSC 9220
- *
- *  SW1		SMSC 9220
- * -----------------------
- *  ON		access disable
- *  OFF		access enable
- */
-
-/*
- * NAND Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NAND Flash ROM
- *  bit1 | bit1  bit2 | bit2 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    FCE 0
- *  OFF  | ON     OFF | OFF  |    FCE 1
- */
-
-/*
- * External interrupt pin settings
- *
- * IRQX  | pin setting        | device             | level
- * ------+--------------------+--------------------+-------
- * IRQ0  | ICR1A.IRQ0SA 10  | SDHI2 card detect  | Low
- * IRQ6  | ICR1A.IRQ6SA 11  | Ether(LAN9220)     | High
- * IRQ7  | ICR1A.IRQ7SA 10  | LCD Touch Panel    | Low
- * IRQ8  | ICR2A.IRQ8SA 10  | MMC/SD card detect | Low
- * IRQ9  | ICR2A.IRQ9SA 10  | KEY(TCA6408)       | Low
- * IRQ21 | ICR4A.IRQ21SA 11 | Sensor(ADXL345)    | High
- * IRQ22 | ICR4A.IRQ22SA 11 | Sensor(AK8975)     | High
- */
-
-/*
- * USB
- *
- * USB0 : CN22 : Function
- * USB1 : CN31 : Function/Host *1
- *
- * J30 (for CN31) *1
- * ----------+---------------+-------------
- * 1-2 short | VBUS 5V       | Host
- * open      | external VBUS | Function
- *
- * CAUTION
- *
- * renesas_usbhs driver can use external interrupt mode
- * (which come from USB-PHY) or autonomy mode (it use own interrupt)
- * for detecting connection/disconnection when Function.
- * USB will be power OFF while it has been disconnecting
- * if external interrupt mode, and it is always power ON if autonomy mode,
- *
- * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
- * because Touchscreen is using IRQ7-PORT40.
- * It is impossible to use IRQ7 demux on this board.
- */
-
-/*
- * SDHI0 (CN12)
- *
- * SW56 : OFF
- *
- */
-
-/* MMC /SDHI1 (CN7)
- *
- * I/O voltage : 1.8v
- *
- * Power voltage : 1.8v or 3.3v
- *  J22 : select power voltage *1
- *	1-2 pin : 1.8v
- *	2-3 pin : 3.3v
- *
- * *1
- * Please change J22 depends the card to be used.
- * MMC's OCR field set to support either voltage for the card inserted.
- *
- *	SW1	|	SW33
- *		| bit1 | bit2 | bit3 | bit4
- * -------------+------+------+------+-------
- * MMC0   OFF	|  OFF |   X  |  ON  |  X       (Use MMCIF)
- * SDHI1  OFF	|  ON  |   X  |  OFF |  X       (Use MFD_SH_MOBILE_SDHI)
- *
- */
-
-/*
- * SDHI2 (CN23)
- *
- * microSD card sloct
- *
- */
-
-/*
- * FSI - AK4642
- *
- * it needs amixer settings for playing
- *
- * amixer set "Headphone Enable" on
- */
-
-/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] -{
-	/*
-	 * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V
-	 * Since we cannot support both voltages, we support the default 1.8V
-	 */
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] -{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* SMSC */
-static struct resource smc911x_resources[] = {
-	{
-		.start	= 0x14000000,
-		.end	= 0x16000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= evt2irq(0x02c0) /* IRQ6A */,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(smc911x_resources),
-	.resource       = smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/* MERAM */
-static struct sh_mobile_meram_info mackerel_meram_info = {
-	.addr_mode	= SH_MOBILE_MERAM_MODE1,
-};
-
-static struct resource meram_resources[] = {
-	[0] = {
-		.name	= "regs",
-		.start	= 0xe8000000,
-		.end	= 0xe807ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "meram",
-		.start	= 0xe8080000,
-		.end	= 0xe81fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device meram_device = {
-	.name		= "sh_mobile_meram",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(meram_resources),
-	.resource	= meram_resources,
-	.dev		= {
-		.platform_data = &mackerel_meram_info,
-	},
-};
-
-/* LCDC and backlight */
-static struct fb_videomode mackerel_lcdc_modes[] = {
-	{
-		.name		= "WVGA Panel",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 220,
-		.right_margin	= 110,
-		.hsync_len	= 70,
-		.upper_margin	= 20,
-		.lower_margin	= 5,
-		.vsync_len	= 5,
-		.sync		= 0,
-	},
-};
-
-static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x40,
-	},
-	.icb[1] = {
-		.meram_size     = 0x40,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.meram_dev = &mackerel_meram_info,
-	.clock_source = LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = mackerel_lcdc_modes,
-		.num_modes = ARRAY_SIZE(mackerel_lcdc_modes),
-		.interface_type		= RGB24,
-		.clock_divider		= 3,
-		.flags			= 0,
-		.panel_cfg = {
-			.width		= 152,
-			.height		= 91,
-		},
-		.meram_cfg = &lcd_meram_cfg,
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct gpio_backlight_platform_data gpio_backlight_data = {
-	.fbdev = &lcdc_device.dev,
-	.gpio = 31,
-	.def_value = 1,
-	.name = "backlight",
-};
-
-static struct platform_device gpio_backlight_device = {
-	.name = "gpio-backlight",
-	.dev = {
-		.platform_data = &gpio_backlight_data,
-	},
-};
-
-/* HDMI */
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags		= HDMI_SND_SRC_SPDIF,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
-		.start	= evt2irq(0x17e0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x100,
-	},
-	.icb[1] = {
-		.meram_size     = 0x100,
-	},
-};
-
-static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
-	.meram_dev = &mackerel_meram_info,
-	.clock_source = LCDC_CLK_EXTERNAL,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.meram_cfg = &hdmi_meram_cfg,
-		.tx_dev = &hdmi_device,
-	}
-};
-
-static struct resource hdmi_lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe947fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x1780),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(hdmi_lcdc_resources),
-	.resource	= hdmi_lcdc_resources,
-	.id		= 1,
-	.dev	= {
-		.platform_data	= &hdmi_lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct asoc_simple_card_info fsi2_hdmi_info = {
-	.name		= "HDMI",
-	.card		= "FSI2B-HDMI",
-	.codec		= "sh-mobile-hdmi",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
-	.cpu_dai = {
-		.name	= "fsib-dai",
-	},
-	.codec_dai = {
-		.name	= "sh_mobile_hdmi-hifi",
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name	= "asoc-simple-card",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &fsi2_hdmi_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
-	},
-};
-
-static void __init hdmi_init_pm_clock(void)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	int ret;
-	long rate;
-
-	if (IS_ERR(hdmi_ick)) {
-		ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
-	if (ret < 0) {
-		pr_err("Cannot set PLLC2 parent: %d, %d users\n",
-		       ret, sh7372_pllc2_clk.usecount);
-		goto out;
-	}
-
-	pr_debug("PLLC2 initial frequency %lu\n",
-		 clk_get_rate(&sh7372_pllc2_clk));
-
-	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
-	if (rate <= 0) {
-		pr_err("Cannot get suitable rate: %ld\n", rate);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
-	if (ret < 0) {
-		pr_err("Cannot set rate %ld: %d\n", rate, ret);
-		goto out;
-	}
-
-	pr_debug("PLLC2 set frequency %lu\n", rate);
-
-	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-	if (ret < 0)
-		pr_err("Cannot set HDMI parent: %d\n", ret);
-
-out:
-	if (!IS_ERR(hdmi_ick))
-		clk_put(hdmi_ick);
-}
-
-/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
- *
- * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
- * but on this particular board IRQ7 is already used by
- * the touch screen. This leaves us with software polling.
- */
-#define USBHS0_POLL_INTERVAL (HZ * 5)
-
-struct usbhs_private {
-	void __iomem *usbphyaddr;
-	void __iomem *usbcrcaddr;
-	struct renesas_usbhs_platform_info info;
-	struct delayed_work work;
-	struct platform_device *pdev;
-};
-
-#define usbhs_get_priv(pdev)				\
-	container_of(renesas_usbhs_get_info(pdev),	\
-		     struct usbhs_private, info)
-
-#define usbhs_is_connected(priv)			\
-	(!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
-	return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* init phy */
-	__raw_writew(0x8a0a, priv->usbcrcaddr);
-
-	return 0;
-}
-
-static int usbhs0_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static void usbhs0_work_function(struct work_struct *work)
-{
-	struct usbhs_private *priv = container_of(work, struct usbhs_private,
-						  work.work);
-
-	renesas_usbhs_call_notify_hotplug(priv->pdev);
-	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
-}
-
-static int usbhs0_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	priv->pdev = pdev;
-	INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
-	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
-	return 0;
-}
-
-static int usbhs0_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	cancel_delayed_work_sync(&priv->work);
-
-	return 0;
-}
-
-static struct usbhs_private usbhs0_private = {
-	.usbcrcaddr	= IOMEM(0xe605810c),		/* USBCR2 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs0_hardware_init,
-			.hardware_exit	= usbhs0_hardware_exit,
-			.phy_reset	= usbhs_phy_reset,
-			.get_id		= usbhs0_get_id,
-			.get_vbus	= usbhs_get_vbus,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.d0_tx_id	= SHDMA_SLAVE_USB0_TX,
-			.d1_rx_id	= SHDMA_SLAVE_USB0_RX,
-		},
-	},
-};
-
-static struct resource usbhs0_resources[] = {
-	[0] = {
-		.name	= "USBHS0",
-		.start	= 0xe6890000,
-		.end	= 0xe68900e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ca0) /* USB0_USB0I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs0_device = {
-	.name	= "renesas_usbhs",
-	.id	= 0,
-	.dev = {
-		.platform_data		= &usbhs0_private.info,
-	},
-	.num_resources	= ARRAY_SIZE(usbhs0_resources),
-	.resource	= usbhs0_resources,
-};
-
-/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
- *
- * Use J30 to select between Host and Function. This setting
- * can however not be detected by software. Hotplug of USBHS1
- * is provided via IRQ8.
- *
- * Current USB1 works as "USB Host".
- *  - set J30 "short"
- *
- * If you want to use it as "USB gadget",
- *  - J30 "open"
- *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
- *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
- *  - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
- */
-#define IRQ8 evt2irq(0x0300)
-#define USB_PHY_MODE		(1 << 4)
-#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
-#define USB_PHY_ON		(1 << 1)
-#define USB_PHY_OFF		(1 << 0)
-#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
-
-static irqreturn_t usbhs1_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	dev_dbg(&pdev->dev, "%s\n", __func__);
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	/* clear status */
-	__raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
-		     priv->usbphyaddr);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhs1_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-	int ret;
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
-	ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-
-	/* enable USB phy interrupt */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
-
-	return 0;
-}
-
-static int usbhs1_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
-	free_irq(IRQ8, pdev);
-
-	return 0;
-}
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
-	return USBHS_HOST;
-}
-
-static u32 usbhs1_pipe_cfg[] = {
-	USB_ENDPOINT_XFER_CONTROL,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs1_private = {
-	.usbphyaddr	= IOMEM(0xe60581e2),	/* USBPHY1INTAP */
-	.usbcrcaddr	= IOMEM(0xe6058130),	/* USBCR4 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs1_hardware_init,
-			.hardware_exit	= usbhs1_hardware_exit,
-			.get_id		= usbhs1_get_id,
-			.phy_reset	= usbhs_phy_reset,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.has_otg	= 1,
-			.pipe_type	= usbhs1_pipe_cfg,
-			.pipe_size	= ARRAY_SIZE(usbhs1_pipe_cfg),
-			.d0_tx_id	= SHDMA_SLAVE_USB1_TX,
-			.d1_rx_id	= SHDMA_SLAVE_USB1_RX,
-		},
-	},
-};
-
-static struct resource usbhs1_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs1_device = {
-	.name	= "renesas_usbhs",
-	.id	= 1,
-	.dev = {
-		.platform_data		= &usbhs1_private.info,
-		.dma_mask		= &usbhs1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(usbhs1_resources),
-	.resource	= usbhs1_resources,
-};
-
-/* LED */
-static struct gpio_led mackerel_leds[] = {
-	{
-		.name		= "led0",
-		.gpio		= 0,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "led1",
-		.gpio		= 1,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "led2",
-		.gpio		= 2,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "led3",
-		.gpio		= 159,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data mackerel_leds_pdata = {
-	.leds = mackerel_leds,
-	.num_leds = ARRAY_SIZE(mackerel_leds),
-};
-
-static struct platform_device leds_device = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data  = &mackerel_leds_pdata,
-	},
-};
-
-/* FSI */
-#define IRQ_FSI evt2irq(0x1840)
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSIA_TX,
-		.rx_id = SHDMA_SLAVE_FSIA_RX,
-	},
-	.port_b = {
-		.flags = SH_FSI_CLK_CPG	|
-			 SH_FSI_FMT_SPDIF,
-	}
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		/* we need 0xFE1F0000 to access DMA
-		 * instead of 0xFE3C0000 */
-		.name	= "FSI",
-		.start  = 0xFE1F0000,
-		.end    = 0xFE1F0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_FSI,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_ak4643_info = {
-	.name		= "AK4643",
-	.card		= "FSI2A-AK4643",
-	.codec		= "ak4642-codec.0-0013",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "ak4642-hifi",
-		.sysclk	= 11289600,
-	},
-};
-
-static struct platform_device fsi_ak4643_device = {
-	.name	= "asoc-simple-card",
-	.dev	= {
-		.platform_data	= &fsi2_ak4643_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_ak4643_device.dev.coherent_dma_mask,
-	},
-};
-
-/* FLCTL */
-static struct mtd_partition nand_partition_info[] = {
-	{
-		.name	= "system",
-		.offset	= 0,
-		.size	= 128 * 1024 * 1024,
-	},
-	{
-		.name	= "userdata",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 256 * 1024 * 1024,
-	},
-	{
-		.name	= "cache",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 128 * 1024 * 1024,
-	},
-};
-
-static struct resource nand_flash_resources[] = {
-	[0] = {
-		.start	= 0xe6a30000,
-		.end	= 0xe6a3009b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0d80), /* flstei: status error irq */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
-	.parts		= nand_partition_info,
-	.nr_parts	= ARRAY_SIZE(nand_partition_info),
-	.flcmncr_val	= CLK_16B_12L_4H | TYPESEL_SET
-			| SHBUSSEL | SEL_16BIT | SNAND_E,
-	.use_holden	= 1,
-};
-
-static struct platform_device nand_flash_device = {
-	.name		= "sh_flctl",
-	.resource	= nand_flash_resources,
-	.num_resources	= ARRAY_SIZE(nand_flash_resources),
-	.dev		= {
-		.platform_data = &nand_flash_data,
-	},
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
-	.cd_gpio	= 172,
-};
-
-static struct resource sdhi0_resources[] = {
-	{
-		.name	= "SDHI0",
-		.start	= 0xe6850000,
-		.end	= 0xe68500ff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-/* SDHI1 */
-
-/* GPIO 41 can trigger IRQ8, but it is used by USBHS1, we have to poll */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_NEEDS_POLL,
-	.cd_gpio	= 41,
-};
-
-static struct resource sdhi1_resources[] = {
-	{
-		.name	= "SDHI1",
-		.start	= 0xe6860000,
-		.end	= 0xe68600ff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-	.id		= 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-#endif
-
-/* SDHI2 */
-
-/*
- * The card detect pin of the top SD/MMC slot (CN23) is active low and is
- * connected to GPIO SCIFB_SCK of SH7372 (GPIO 162).
- */
-static struct sh_mobile_sdhi_info sdhi2_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_NEEDS_POLL,
-	.cd_gpio	= 162,
-};
-
-static struct resource sdhi2_resources[] = {
-	{
-		.name	= "SDHI2",
-		.start	= 0xe6870000,
-		.end	= 0xe68700ff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= evt2irq(0x1220), /* SDHI2_SDHI2I1 */
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= evt2irq(0x1240), /* SDHI2_SDHI2I2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi2_device = {
-	.name	= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi2_resources),
-	.resource	= sdhi2_resources,
-	.id		= 2,
-	.dev	= {
-		.platform_data	= &sdhi2_info,
-	},
-};
-
-/* SH_MMCIF */
-#if IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xE6BD0000,
-		.end	= 0xE6BD00FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= evt2irq(0x1ac0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= evt2irq(0x1ae0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-	.use_cd_gpio	= true,
-	/* card detect pin for SD/MMC slot (CN7) */
-	.cd_gpio	= 41,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-#endif
-
-static int mackerel_camera_add(struct soc_camera_device *icd);
-static void mackerel_camera_del(struct soc_camera_device *icd);
-
-static int camera_set_capture(struct soc_camera_platform_info *info,
-			      int enable)
-{
-	return 0; /* camera sensor always enabled */
-}
-
-static struct soc_camera_platform_info camera_info = {
-	.format_name = "UYVY",
-	.format_depth = 16,
-	.format = {
-		.code = V4L2_MBUS_FMT_UYVY8_2X8,
-		.colorspace = V4L2_COLORSPACE_SMPTE170M,
-		.field = V4L2_FIELD_NONE,
-		.width = 640,
-		.height = 480,
-	},
-	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
-	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
-	V4L2_MBUS_DATA_ACTIVE_HIGH,
-	.mbus_type = V4L2_MBUS_PARALLEL,
-	.set_capture = camera_set_capture,
-};
-
-static struct soc_camera_link camera_link = {
-	.bus_id		= 0,
-	.add_device	= mackerel_camera_add,
-	.del_device	= mackerel_camera_del,
-	.module_name	= "soc_camera_platform",
-	.priv		= &camera_info,
-};
-
-static struct platform_device *camera_device;
-
-static void mackerel_camera_release(struct device *dev)
-{
-	soc_camera_platform_release(&camera_device);
-}
-
-static int mackerel_camera_add(struct soc_camera_device *icd)
-{
-	return soc_camera_platform_add(icd, &camera_device, &camera_link,
-				       mackerel_camera_release, 0);
-}
-
-static void mackerel_camera_del(struct soc_camera_device *icd)
-{
-	soc_camera_platform_del(icd, camera_device, &camera_link);
-}
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
-	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-	.max_width = 8188,
-	.max_height = 8188,
-};
-
-static struct resource ceu_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = intcs_evt2irq(0x880),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu_device = {
-	.name		= "sh_mobile_ceu",
-	.id             = 0, /* "ceu0" clock */
-	.num_resources	= ARRAY_SIZE(ceu_resources),
-	.resource	= ceu_resources,
-	.dev		= {
-		.platform_data		= &sh_mobile_ceu_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device mackerel_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &camera_link,
-	},
-};
-
-static struct platform_device *mackerel_devices[] __initdata = {
-	&nor_flash_device,
-	&smc911x_device,
-	&lcdc_device,
-	&gpio_backlight_device,
-	&usbhs0_device,
-	&usbhs1_device,
-	&leds_device,
-	&fsi_device,
-	&fsi_ak4643_device,
-	&fsi_hdmi_device,
-	&nand_flash_device,
-	&sdhi0_device,
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-	&sdhi1_device,
-#else
-	&sh_mmcif_device,
-#endif
-	&sdhi2_device,
-	&ceu_device,
-	&mackerel_camera,
-	&hdmi_device,
-	&hdmi_lcdc_device,
-	&meram_device,
-};
-
-/* Keypad Initialization */
-#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
-{								\
-	.type		= ev_type,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-}
-
-#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
-
-static struct tca6416_button mackerel_gpio_keys[] = {
-	KEYPAD_BUTTON_LOW(KEY_HOME),
-	KEYPAD_BUTTON_LOW(KEY_MENU),
-	KEYPAD_BUTTON_LOW(KEY_BACK),
-	KEYPAD_BUTTON_LOW(KEY_POWER),
-};
-
-static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
-	.buttons	= mackerel_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mackerel_gpio_keys),
-	.rep		= 1,
-	.use_polling	= 0,
-	.pinmask	= 0x000F,
-};
-
-/* I2C */
-#define IRQ7 evt2irq(0x02e0)
-#define IRQ9 evt2irq(0x0320)
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4643", 0x13),
-	},
-	/* Keypad */
-	{
-		I2C_BOARD_INFO("tca6408-keys", 0x20),
-		.platform_data = &mackerel_tca6416_keys_info,
-		.irq = IRQ9,
-	},
-	/* Touchscreen */
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = IRQ7,
-	},
-};
-
-#define IRQ21 evt2irq(0x32a0)
-
-static struct i2c_board_info i2c1_devices[] = {
-	/* Accelerometer */
-	{
-		I2C_BOARD_INFO("adxl34x", 0x53),
-		.irq = IRQ21,
-	},
-};
-
-static unsigned long pin_pulldown_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0),
-};
-
-static const struct pinctrl_map mackerel_pinctrl_map[] = {
-	/* ADXL34X */
-	PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372",
-				  "intc_irq21", "intc"),
-	/* CEU */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
-				  "ceu_data_0_7", "ceu"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
-				  "ceu_clk_0", "ceu"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
-				  "ceu_sync", "ceu"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
-				  "ceu_field", "ceu"),
-	/* FLCTL */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
-				  "flctl_data", "flctl"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
-				  "flctl_ce0", "flctl"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
-				  "flctl_ctrl", "flctl"),
-	/* FSIA (AK4643) */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
-				  "fsia_data_out", "fsia"),
-	/* FSIB (HDMI) */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
-				  "fsib_mclk_in", "fsib"),
-	/* HDMI */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
-				  "hdmi", "hdmi"),
-	/* LCDC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
-				  "lcd_data24", "lcd"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
-				  "lcd_sync", "lcd"),
-	/* SCIFA0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
-				  "scifa0_data", "scifa0"),
-	/* SCIFA2 (GT-720F GPS module) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372",
-				  "scifa2_data", "scifa2"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_wp", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "intc_irq26_1", "intc"),
-	/* SDHI1 */
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
-				  "sdhi1_ctrl", "sdhi1"),
-#else
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
-				  "mmc0_ctrl_0", "mmc0"),
-#endif
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
-				  "sdhi2_ctrl", "sdhi2"),
-	/* SMSC911X */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
-				  "bsc_cs5a", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
-				  "intc_irq6_0", "intc"),
-	/* ST1232 */
-	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372",
-				  "intc_irq7_0", "intc"),
-	/* TCA6416 */
-	PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372",
-				  "intc_irq9_0", "intc"),
-	/* USBHS0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
-				  "usb0_vbus", "usb0"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
-				      "usb0_vbus", pin_pulldown_conf),
-	/* USBHS1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
-				  "usb1_vbus", "usb1"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
-				      "usb1_vbus", pin_pulldown_conf),
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
-				  "usb1_otg_id_0", "usb1"),
-};
-
-#define GPIO_PORT9CR	IOMEM(0xE6051009)
-#define GPIO_PORT10CR	IOMEM(0xE605100A)
-#define SRCR4		IOMEM(0xe61580bc)
-#define USCCR1		IOMEM(0xE6058144)
-static void __init mackerel_init(void)
-{
-	static struct pm_domain_device domain_devices[] __initdata = {
-		{ "A4LC", &lcdc_device, },
-		{ "A4LC", &hdmi_lcdc_device, },
-		{ "A4LC", &meram_device, },
-		{ "A4MP", &fsi_device, },
-		{ "A3SP", &usbhs0_device, },
-		{ "A3SP", &usbhs1_device, },
-		{ "A3SP", &nand_flash_device, },
-		{ "A3SP", &sdhi0_device, },
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-		{ "A3SP", &sdhi1_device, },
-#else
-		{ "A3SP", &sh_mmcif_device, },
-#endif
-		{ "A3SP", &sdhi2_device, },
-		{ "A4R", &ceu_device, },
-	};
-	u32 srcr4;
-	struct clk *clk;
-
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-
-	pinctrl_register_mappings(mackerel_pinctrl_map,
-				  ARRAY_SIZE(mackerel_pinctrl_map));
-	sh7372_pinmux_init();
-
-	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-
-	/* FSI2 port A (ak4643) */
-	gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
-
-	gpio_request(9,  NULL);
-	gpio_request(10, NULL);
-	gpio_direction_none(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
-
-	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
-
-	/* FSI2 port B (HDMI) */
-	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
-	/* set SPU2 clock to 119.6 MHz */
-	clk = clk_get(NULL, "spu_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 119600000));
-		clk_put(clk);
-	}
-
-	/* Keypad */
-	irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
-
-	/* Touchscreen */
-	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
-
-	/* Accelerometer */
-	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
-
-	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
-	srcr4 = __raw_readl(SRCR4);
-	__raw_writel(srcr4 | (1 << 13), SRCR4);
-	udelay(50);
-	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(1, i2c1_devices,
-				ARRAY_SIZE(i2c1_devices));
-
-	sh7372_add_standard_devices();
-
-	platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
-
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-
-	hdmi_init_pm_clock();
-	sh7372_pm_init();
-	pm_clk_add(&fsi_device.dev, "spu2");
-	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
-}
-
-static const char *mackerel_boards_compat_dt[] __initdata = {
-	"renesas,mackerel",
-	NULL,
-};
-
-DT_MACHINE_START(MACKEREL_DT, "mackerel")
-	.map_io		= sh7372_map_io,
-	.init_early	= sh7372_add_early_devices,
-	.init_irq	= sh7372_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= mackerel_init,
-	.init_late	= sh7372_pm_init_late,
-	.init_time	= sh7372_earlytimer_init,
-	.dt_compat  = mackerel_boards_compat_dt,
-MACHINE_END
--- 0001/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
+++ /dev/null	2013-06-03 21:41:10.638032047 +0900
@@ -1,93 +0,0 @@
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2010 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
-
-LIST "RWT Setting"
-EW 0xE6020004, 0xA500
-EW 0xE6030004, 0xA500
-
-LIST "GPIO Setting"
-EB 0xE6051013, 0xA2
-
-LIST "CPG"
-ED 0xE61500C0, 0x00000002
-
-WAIT 1, 0xFE40009C
-
-LIST "FRQCR"
-ED 0xE6150000, 0x2D1305C3
-ED 0xE61500E0, 0x9E40358E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xE61500E4, 0x00002000
-
-WAIT 1, 0xFE40009C
-
-LIST "PLL"
-ED 0xE6150028, 0x00004000
-
-WAIT 1, 0xFE40009C
-
-ED 0xE615002C, 0x93000040
-
-WAIT 1, 0xFE40009C
-
-LIST "SUB/USBClk"
-ED 0xE6150080, 0x00000180
-
-LIST "BSC"
-ED 0xFEC10000, 0x00E0001B
-
-LIST "SBSC1"
-ED 0xFE400354, 0x01AD8000
-ED 0xFE400354, 0x01AD8001
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400008, 0xBCC90151
-ED 0xFE400040, 0x41774113
-ED 0xFE400044, 0x2712E229
-ED 0xFE400048, 0x20C18505
-ED 0xFE40004C, 0x00110209
-ED 0xFE400010, 0x00000087
-
-WAIT 30, 0xFE40009C
-
-ED 0xFE400084, 0x0000003F
-EB 0xFE500000, 0x00
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400084, 0x0000FF0A
-EB 0xFE500000, 0x00
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400084, 0x00002201
-EB 0xFE500000, 0x00
-ED 0xFE400084, 0x00000302
-EB 0xFE500000, 0x00
-EB 0xFE5C0000, 0x00
-ED 0xFE400008, 0xBCC90159
-ED 0xFE40008C, 0x88800004
-ED 0xFE400094, 0x00000004
-ED 0xFE400028, 0xA55A0032
-ED 0xFE40002C, 0xA55A000C
-ED 0xFE400020, 0xA55A2048
-ED 0xFE400008, 0xBCC90959
-
-LIST "Change CPGA setting"
-ED 0xE61500E0, 0x9E40352E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400354, 0x01AD8002
-
-LIST "SCIF0 - Serial port for earlyprintk"
-EB 0xE6053098, 0xe1
-EW 0xE6C40000, 0x0000
-EB 0xE6C40004, 0x19
-EW 0xE6C40008, 0x0030
--- 0001/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h
+++ /dev/null	2013-06-03 21:41:10.638032047 +0900
@@ -1,38 +0,0 @@
-#ifndef MMC_MACKEREL_H
-#define MMC_MACKEREL_H
-
-#define PORT0CR      (void __iomem *)0xe6051000
-#define PORT1CR      (void __iomem *)0xe6051001
-#define PORT2CR      (void __iomem *)0xe6051002
-#define PORT159CR    (void __iomem *)0xe605009f
-
-#define PORTR031_000DR (void __iomem *)0xe6055000
-#define PORTL159_128DR (void __iomem *)0xe6054010
-
-static inline void mmc_init_progress(void)
-{
-       /* Initialise LEDS0-3
-        * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
-        * value:     0x10 - enable output
-        */
-       __raw_writeb(0x10, PORT0CR);
-       __raw_writeb(0x10, PORT1CR);
-       __raw_writeb(0x10, PORT2CR);
-       __raw_writeb(0x10, PORT159CR);
-}
-
-static inline void mmc_update_progress(int n)
-{
-	unsigned a = 0, b = 0;
-
-	if (n < 3)
-		a = 1 << n;
-	else
-		b = 1 << 31;
-
-	__raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
-		     PORTR031_000DR);
-	__raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
-		     PORTL159_128DR);
-}
-#endif /* MMC_MACKEREL_H */
--- 0001/arch/arm/mach-shmobile/include/mach/mmc.h
+++ work/arch/arm/mach-shmobile/include/mach/mmc.h	2014-10-29 16:16:58.000000000 +0900
@@ -7,10 +7,5 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_MACKEREL
-#include "mach/mmc-mackerel.h"
-#else
 #error "unsupported board."
-#endif
-
 #endif /* MMC_H */
--- 0001/arch/arm/mach-shmobile/include/mach/zboot.h
+++ work/arch/arm/mach-shmobile/include/mach/zboot.h	2014-10-29 16:18:09.000000000 +0900
@@ -9,10 +9,7 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_MACKEREL
-#define MEMORY_START	0x40000000
-#include "mach/head-mackerel.txt"
-#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
+#if defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
 #define MEMORY_START	0x43000000
 #include "mach/head-kzm9g.txt"
 #else