Re: [PATCH 2/3] input: touchscreen: of: Register multitouch axes

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

On Wed, Nov 05, 2014 at 04:07:49PM +0100, Maxime Ripard wrote:
> So far, the DT parsing code was only setting up the regular input axes,
> completely ignoring their multitouch counter parts.
> 
> Fill them with the same parameters than the regular axes.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  drivers/input/touchscreen/of_touchscreen.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
> index 74d6b0eb50ac..cf2a753edd96 100644
> --- a/drivers/input/touchscreen/of_touchscreen.c
> +++ b/drivers/input/touchscreen/of_touchscreen.c
> @@ -42,17 +42,23 @@ void touchscreen_parse_of_params(struct input_dev *dev)
>  
>  	maximum = of_get_optional_u32(np, "touchscreen-size-x");
>  	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-x");
> -	if (maximum || fuzz)
> +	if (maximum || fuzz) {
>  		input_set_abs_params(dev, ABS_X, 0, maximum, fuzz, 0);
> +		input_set_abs_params(dev, ABS_MT_POSITION_X, 0, maximum, fuzz, 0);

Not all devices are multitouch so you shoudl not be setting multitouch
bits unconditionally.

In I think we should rely on driver to set capability bits properly and
then here test them and apply the readings. Probably also issue a
warning if we see max/fuzz setting but neither ABS_<N>/ABS_MT_<N>
capabilities.

Thanks.

> +	}
>  
>  	maximum = of_get_optional_u32(np, "touchscreen-size-y");
>  	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-y");
> -	if (maximum || fuzz)
> +	if (maximum || fuzz) {
>  		input_set_abs_params(dev, ABS_Y, 0, maximum, fuzz, 0);
> +		input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, maximum, fuzz, 0);
> +	}
>  
>  	maximum = of_get_optional_u32(np, "touchscreen-max-pressure");
>  	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-pressure");
> -	if (maximum || fuzz)
> +	if (maximum || fuzz) {
>  		input_set_abs_params(dev, ABS_PRESSURE, 0, maximum, fuzz, 0);
> +		input_set_abs_params(dev, ABS_MT_PRESSURE, 0, maximum, fuzz, 0);
> +	}
>  }
>  EXPORT_SYMBOL(touchscreen_parse_of_params);
> -- 
> 2.1.1
> 

-- 
Dmitry