From: David Jander <david@protonic.nl>
To: David Jander <david@protonic.nl>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
linux-can@vger.kernel.org,
Wolfgang Grandegger <wg@grandegger.com>,
Alexander Stein <alexander.stein@systec-electronic.com>
Subject: Re: [PATCH 03/14] can: rx-fifo: Change to do controller off-load in interrupt and NAPI poll
Date: Mon, 10 Nov 2014 12:00:46 +0100 [thread overview]
Message-ID: <20141110120046.28f1d9ca@archvile> (raw)
In-Reply-To: <1415262853-22907-4-git-send-email-david@protonic.nl>
On Thu, 6 Nov 2014 09:34:02 +0100
David Jander <david@protonic.nl> wrote:
> The idea is to use rx-fifo from interrupt context and take away the need
> for NAPI polling from the driver. Currently no support for error-handling
> is included.
>
> Signed-off-by: David Jander <david@protonic.nl>
> ---
> drivers/net/can/dev.c | 213
> +++++++++++++++++++++++++++++++++++++----------- include/linux/can/dev.h |
> 29 +++++-- 2 files changed, 188 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
> index 930b9f4..9b17592 100644
> --- a/drivers/net/can/dev.c
> +++ b/drivers/net/can/dev.c
> @@ -26,6 +26,7 @@
> #include <linux/can/skb.h>
> #include <linux/can/netlink.h>
> #include <linux/can/led.h>
> +#include <linux/circ_buf.h>
> #include <net/rtnetlink.h>
>
> #define MOD_DESC "CAN device driver interface"
> @@ -281,6 +282,14 @@ static bool can_rx_fifo_ge(struct can_rx_fifo *fifo,
> unsigned int a, unsigned in return a <= b;
> }
>
> +static bool can_rx_fifo_le(struct can_rx_fifo *fifo, unsigned int a,
> unsigned int b) +{
> + if (fifo->inc)
> + return a <= b;
> + else
> + return a >= b;
> +}
> +
> static unsigned int can_rx_fifo_inc(struct can_rx_fifo *fifo, unsigned int
> *val) {
> if (fifo->inc)
> @@ -305,27 +314,101 @@ static u64 can_rx_fifo_mask_high(struct can_rx_fifo
> *fifo) return ~0LLU >> (64 - fifo->high_first + fifo->high_last - 1) <<
> fifo->high_last; }
>
> +static int can_rx_fifo_read_napi_frame(struct can_rx_fifo *fifo, int index)
> +{
> + struct net_device *dev = fifo->dev;
> + struct net_device_stats *stats = &dev->stats;
> + struct sk_buff *skb;
> + struct can_frame *cf;
> +
> + skb = alloc_can_skb(dev, &cf);
> + if (unlikely(!skb)) {
> + stats->rx_dropped++;
> + return 0;
> + }
> +
> + memcpy(cf, &fifo->ring[index], sizeof(*cf));
> +
> + stats->rx_packets++;
> + stats->rx_bytes += cf->can_dlc;
> +
> + netif_receive_skb(skb);
> +
> + return 1;
> +}
> +
> +static int can_rx_fifo_napi_poll(struct napi_struct *napi, int quota)
> +{
> + struct can_rx_fifo *fifo = container_of(napi, struct can_rx_fifo,
> napi);
> + int work_done = 0;
> + int ret;
> + unsigned int head;
> + unsigned int tail;
> +
> +restart_poll:
> + /* handle mailboxes */
> + head = smp_load_acquire(&fifo->ring_head);
> + tail = fifo->ring_tail;
> + while ((CIRC_CNT(head, tail, fifo->ring_size) >= 1) &&
> + (work_done < quota)) {
> + ret = can_rx_fifo_read_napi_frame(fifo, tail);
> + work_done += ret;
> + tail = (tail + 1) & (fifo->ring_size -1);
> + smp_store_release(&fifo->ring_tail, tail);
> + }
> +
> + if (work_done < quota) {
> + napi_complete(napi);
> +
> + /* Check if there was another interrupt */
> + head = smp_load_acquire(&fifo->ring_head);
> + if ((CIRC_CNT(head, tail, fifo->ring_size) >= 1) &&
> + napi_reschedule(&fifo->napi))
> + goto restart_poll;
> + }
> +
> + can_led_event(fifo->dev, CAN_LED_EVENT_RX);
> +
> + return work_done;
> +}
> +
> int can_rx_fifo_add(struct net_device *dev, struct can_rx_fifo *fifo)
> {
> + unsigned int weight;
> fifo->dev = dev;
>
> if ((fifo->low_first < fifo->high_first) &&
> - (fifo->high_first < fifo->high_last))
> + (fifo->high_first < fifo->high_last)) {
> fifo->inc = true;
> - else if ((fifo->low_first > fifo->high_first) &&
> - (fifo->high_first > fifo->high_last))
> + weight = fifo->high_last - fifo->low_first;
> + } else if ((fifo->low_first > fifo->high_first) &&
> + (fifo->high_first > fifo->high_last)) {
> fifo->inc = false;
> - else
> + weight = fifo->low_first - fifo->high_last;
> + } else {
> return -EINVAL;
> + }
>
> - if (!fifo->read_pending || !fifo->mailbox_enable_mask ||
> - !fifo->mailbox_disable || !fifo->mailbox_receive)
> + if (!fifo->mailbox_enable_mask || !fifo->mailbox_move_to_buffer ||
> + !fifo->mailbox_enable)
> return -EINVAL;
>
> + /* Make ring-buffer a sensible size that is a power of 2 */
> + fifo->ring_size = (2 << fls(weight));
> + fifo->ring = kzalloc(sizeof(struct can_frame) * fifo->ring_size,
> + GFP_KERNEL);
> + if (!fifo->ring)
> + return -ENOMEM;
> +
> + fifo->ring_head = fifo->ring_tail = 0;
> +
> + /* Take care of NAPI handling */
> + netif_napi_add(dev, &fifo->napi, can_rx_fifo_napi_poll, weight);
> +
> /* init variables */
> fifo->mask_low = can_rx_fifo_mask_low(fifo);
> fifo->mask_high = can_rx_fifo_mask_high(fifo);
> - fifo->next = fifo->low_first;
> + fifo->scan_high_first = false;
> fifo->active = fifo->mask_low | fifo->mask_high;
> fifo->mailbox_enable_mask(fifo, fifo->active);
>
> @@ -338,60 +421,94 @@ int can_rx_fifo_add(struct net_device *dev, struct
> can_rx_fifo *fifo) }
> EXPORT_SYMBOL_GPL(can_rx_fifo_add);
>
> -int can_rx_fifo_poll(struct can_rx_fifo *fifo, int quota)
> +static unsigned int can_rx_fifo_offload_if_full(struct can_rx_fifo *fifo,
> unsigned int n) +{
> + unsigned int head = fifo->ring_head;
> + unsigned int tail = ACCESS_ONCE(fifo->ring_tail);
> + unsigned int ret = 0;
> +
> + if (CIRC_SPACE(head, tail, fifo->ring_size) >= 1) {
> + ret = fifo->mailbox_move_to_buffer(fifo, &fifo->ring[head],
> n);
> + if (ret)
> + smp_store_release(&fifo->ring_head,
> + (head + 1) & (fifo->ring_size - 1));
> + } else {
> + ret = fifo->mailbox_move_to_buffer(fifo, &fifo->overflow,
> n);
> + if (ret)
> + fifo->dev->stats.rx_dropped++;
> + }
> + return ret;
> +}
> +
> +int can_rx_fifo_irq_offload(struct can_rx_fifo *fifo)
> {
> - int received = 0;
> - u64 pending;
> - unsigned int mb;
> -
> - do {
> - pending = fifo->read_pending(fifo);
> - pending &= fifo->active;
> -
> - if (!(pending & BIT_ULL(fifo->next))) {
> - /*
> - * Wrap around only if:
> - * - we are in the upper group and
> - * - there is a CAN frame in the first mailbox
> - * of the lower group.
> - */
> - if (can_rx_fifo_ge(fifo, fifo->next,
> fifo->high_first) &&
> - (pending & BIT_ULL(fifo->low_first))) {
> - fifo->next = fifo->low_first;
> -
> - fifo->active |= fifo->mask_high;
> - fifo->mailbox_enable_mask(fifo,
> fifo->mask_high);
> - } else {
> - break;
> - }
> + unsigned int i;
> + unsigned int ret;
> + unsigned int received = 0;
> +
> + if (fifo->scan_high_first) {
> + for (i = fifo->high_first;
> + can_rx_fifo_le(fifo, i, fifo->high_last);
> + can_rx_fifo_inc(fifo, &i)) {
> + received += can_rx_fifo_offload_if_full(fifo, i);
> + fifo->active |= BIT_ULL(i);
> + fifo->mailbox_enable(fifo, i);
> }
> + }
>
> - mb = can_rx_fifo_inc(fifo, &fifo->next);
> + /* Copy and disable FULL MBs */
> + for (i = fifo->low_first; can_rx_fifo_le(fifo, i, fifo->high_last);
> + can_rx_fifo_inc(fifo, &i)) {
> + if (!(fifo->active & BIT_ULL(i)))
> + continue;
> + ret = can_rx_fifo_offload_if_full(fifo, i);
> + if (!ret)
> + break;
> + received += ret;
> + fifo->active &= ~BIT_ULL(i);
> + }
>
> - /* disable mailbox */
> - fifo->active &= ~BIT_ULL(mb);
> - fifo->mailbox_disable(fifo, mb);
> + if (can_rx_fifo_ge(fifo, i, fifo->high_first) && fifo->high_first)
Arrgh! There is a typo in this line, introduced while constantly renaming the
fifo->scan_high_first variable :-(
This line should read:
+ if (can_rx_fifo_ge(fifo, i, fifo->high_first) && fifo->scan_high_first)
This bug just causes a lot of unnecessary dmesg pollution, sorry for that!
> + netdev_warn(fifo->dev, "%s: RX order cannot be guaranteed."
> + " (count=%d)\n", __func__, i);
>
> - fifo->mailbox_receive(fifo, mb);
> + fifo->scan_high_first = false;
>
> - if (fifo->next == fifo->high_first) {
> - fifo->active |= fifo->mask_low;
> - fifo->mailbox_enable_mask(fifo, fifo->mask_low);
> - }
> + /* No EMPTY MB in first half? */
> + if (can_rx_fifo_ge(fifo, i, fifo->high_first)) {
> + /* Re-enable all disabled MBs */
> + fifo->active = fifo->mask_low | fifo->mask_high;
> + fifo->mailbox_enable_mask(fifo, fifo->active);
> +
> + /* Next time we need to check the second half first */
> + fifo->scan_high_first = true;
> + }
>
> - received++;
> - quota--;
> - } while (quota);
> + if (received)
> + napi_schedule(&fifo->napi);
>
> return received;
> }
> -EXPORT_SYMBOL_GPL(can_rx_fifo_poll);
> +EXPORT_SYMBOL_GPL(can_rx_fifo_irq_offload);
> +
> +void can_rx_fifo_napi_enable(struct can_rx_fifo *fifo)
> +{
> + napi_enable(&fifo->napi);
> +}
> +EXPORT_SYMBOL_GPL(can_rx_fifo_napi_enable);
> +
> +void can_rx_fifo_napi_disable(struct can_rx_fifo *fifo)
> +{
> + napi_disable(&fifo->napi);
> +}
> +EXPORT_SYMBOL_GPL(can_rx_fifo_napi_disable);
>
> -u64 can_rx_fifo_get_active_mb_mask(const struct can_rx_fifo *fifo)
> +void can_rx_fifo_del(struct can_rx_fifo *fifo)
> {
> - return fifo->active;
> + kfree(fifo->ring);
> + netif_napi_del(&fifo->napi);
> }
> -EXPORT_SYMBOL_GPL(can_rx_fifo_get_active_mb_mask);
> +EXPORT_SYMBOL_GPL(can_rx_fifo_del);
>
> /*
> * Local echo of CAN messages
> diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
> index ed46f7d..66b0228 100644
> --- a/include/linux/can/dev.h
> +++ b/include/linux/can/dev.h
> @@ -71,18 +71,33 @@ struct can_rx_fifo {
> unsigned int high_first;
> unsigned int high_last; /* not needed during runtime
> */
> - u64 (*read_pending)(struct can_rx_fifo *rx_fifo);
> void (*mailbox_enable_mask)(struct can_rx_fifo *rx_fifo, u64 mask);
> - void (*mailbox_disable)(struct can_rx_fifo *rx_fifo, unsigned int
> mb);
> - void (*mailbox_receive)(struct can_rx_fifo *rx_fifo, unsigned int
> mb);
> + void (*mailbox_enable)(struct can_rx_fifo *rx_fifo, unsigned int
> mb);
> + unsigned int (*mailbox_move_to_buffer)(struct can_rx_fifo *rx_fifo,
> + struct can_frame *frame, unsigned int mb);
>
> u64 mask_low;
> u64 mask_high;
> u64 active;
>
> - unsigned int next;
> + unsigned int scan_high_first;
>
> bool inc;
> +
> + /* CAN frame ring buffer. Will be allocated to an appropriate size
> */
> + struct can_frame *ring;
> +
> + /*
> + * Overflow buffer: This will work sort of as /dev/null if the ring-
> + * buffer is full. We don't want to bother the user with taking care
> + * of that situation, so we just pass it the overflow buffer
> instead.
> + */
> + struct can_frame overflow;
> +
> + size_t ring_size;
> + unsigned int ring_head;
> + unsigned int ring_tail;
> + struct napi_struct napi;
> };
>
> /*
> @@ -127,8 +142,10 @@ u8 can_dlc2len(u8 can_dlc);
> u8 can_len2dlc(u8 len);
>
> int can_rx_fifo_add(struct net_device *dev, struct can_rx_fifo *fifo);
> -int can_rx_fifo_poll(struct can_rx_fifo *fifo, int quota);
> -u64 can_rx_fifo_get_active_mb_mask(const struct can_rx_fifo *fifo);
> +int can_rx_fifo_irq_offload(struct can_rx_fifo *fifo);
> +void can_rx_fifo_napi_enable(struct can_rx_fifo *fifo);
> +void can_rx_fifo_napi_disable(struct can_rx_fifo *fifo);
> +void can_rx_fifo_del(struct can_rx_fifo *fifo);
>
> struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
> void free_candev(struct net_device *dev);
Best regards,
--
David Jander
Protonic Holland.
next prev parent reply other threads:[~2014-11-10 11:00 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-06 8:33 [PATCH V4 00/14] CAN: Add rx-fifo support and port flexcan to it David Jander
2014-11-06 8:34 ` [PATCH 01/14] can: dev: add preliminary rx-fifo David Jander
2014-11-06 8:34 ` [PATCH 02/14] can: rx-fifo: Increase MB size limit from 32 to 64 David Jander
2014-11-06 8:41 ` Marc Kleine-Budde
2014-11-06 16:03 ` David Jander
2014-11-06 16:05 ` Marc Kleine-Budde
2014-11-06 16:20 ` David Jander
2014-11-07 8:40 ` Marc Kleine-Budde
2014-11-07 10:28 ` David Jander
2014-11-06 8:34 ` [PATCH 03/14] can: rx-fifo: Change to do controller off-load in interrupt and NAPI poll David Jander
2014-11-10 11:00 ` David Jander [this message]
2014-11-06 8:34 ` [PATCH 04/14] can: rx-fifo: fix long lines David Jander
2014-11-06 8:34 ` [PATCH 05/14] can: rx-fifo: Add can_rx_fifo_reset() function David Jander
2014-11-06 8:34 ` [PATCH 06/14] can: rx-fifo: remove obsolete comment David Jander
2014-11-06 8:34 ` [PATCH 07/14] can: rx-fifo: Add support for can state tracking and error polling David Jander
2014-11-06 8:34 ` [PATCH 08/14] can: rx-fifo: Add support for simple irq offloading David Jander
2014-11-06 8:34 ` [PATCH 09/14] can: rx-fifo: Add documentation to struct can_rx_fifo David Jander
2014-11-06 8:34 ` [PATCH 10/14] can: flexcan: add documentation about mailbox organizaiton David Jander
2014-11-06 8:34 ` [PATCH 11/14] can: flexcan: rename crl2 -> ctrl2 David Jander
2014-11-06 8:34 ` [PATCH 12/14] can: flexcan: replace open coded mailbox code by proper defines David Jander
2014-11-06 8:34 ` [PATCH 13/14] can: flexcan: Add support for RX-FIFO David Jander
2014-11-06 8:34 ` [PATCH 14/14] can: flexcan: Add MB/Fifo specific column to comment table of IP versions David Jander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141110120046.28f1d9ca@archvile \
--to=david@protonic.nl \
--cc=alexander.stein@systec-electronic.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.