All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff King <peff@peff.net>
To: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Junio C Hamano <gitster@pobox.com>, git@vger.kernel.org
Subject: Re: [PATCH v2 1/2] Clean stale environment pointer in finish_command()
Date: Wed, 12 Nov 2014 05:59:11 -0500	[thread overview]
Message-ID: <20141112105911.GA31608@peff.net> (raw)
In-Reply-To: <20141112105229.GA29101@peff.net>

On Wed, Nov 12, 2014 at 05:52:29AM -0500, Jeff King wrote:

> > However, my personal taste says that reusing the same memory is more
> > elegant than to waste extra memory unnecessarily, so I will go with the
> > child_process_init() solution.
> 
> I do not mind much either way. But I doubt that a single extra struct on
> the stack will break the bank, compared to the fact that we are forking
> and execing a new program. I'd also not be surprised if a smart compiler
> could notice that the variables are used exclusively in non-overlapping
> bits of the code, and just reuse the stack space.

Actually, I take that back. We are passing a pointer to a struct, rather
than by-value, so the compiler cannot know that the sub-function does
not store that pointer in a static variable, and reference it in the
next call. It must use two variables if it cannot see the definition of
run_command.

I still think it's pointless optimization to worry about, and you should
write whichever is the most readable and maintainable.

-Peff

  reply	other threads:[~2014-11-12 10:59 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-07 13:58 [PATCH 0/2] Support updating working trees when pushing into non-bare repos Johannes Schindelin
2014-11-07 13:58 ` [PATCH 1/2] Add a few more values for receive.denyCurrentBranch Johannes Schindelin
2014-11-07 18:49   ` Junio C Hamano
2014-11-07 18:58     ` Johannes Schindelin
2014-11-10 12:54     ` Johannes Schindelin
2014-11-10 16:00       ` Junio C Hamano
2014-11-12 11:13         ` Johannes Schindelin
2014-11-12 18:00           ` Junio C Hamano
2014-11-08 11:18   ` Jeff King
2014-11-08 18:48     ` brian m. carlson
2014-11-10 13:03     ` Johannes Schindelin
2014-11-07 13:58 ` [PATCH 2/2] Let deny.currentBranch=updateInstead ignore submodules Johannes Schindelin
2014-11-07 19:20   ` Junio C Hamano
2014-11-09 16:42     ` Jens Lehmann
2014-11-10 13:04       ` Johannes Schindelin
2014-11-10 13:01     ` Johannes Schindelin
2014-11-10 15:42       ` Junio C Hamano
2014-11-10 19:32         ` Junio C Hamano
2014-11-12 11:09           ` Johannes Schindelin
2014-11-12 17:59             ` Junio C Hamano
2014-11-13 10:29               ` Johannes Schindelin
2014-11-13 10:38                 ` Johannes Schindelin
2014-11-13 17:41                   ` Junio C Hamano
2014-11-13 18:55                     ` Johannes Schindelin
2014-11-13 19:48                       ` Junio C Hamano
2014-11-13 21:06                         ` Junio C Hamano
2014-11-14  7:49                           ` Junio C Hamano
2014-12-02  3:24                             ` Junio C Hamano
2014-12-02  3:25                               ` [PATCH 2/2] receive-pack: support push-to-checkout hook Junio C Hamano
2014-12-02  8:47                                 ` Johannes Schindelin
2014-12-02 13:03                                   ` Michael J Gruber
2014-12-02 13:25                                     ` Johannes Schindelin
2014-12-02 16:39                                   ` Junio C Hamano
2014-12-02 16:45                                     ` Johannes Schindelin
2014-12-02 17:00                                       ` Junio C Hamano
2014-12-02 17:12                                         ` Johannes Schindelin
2014-12-02 17:19                                           ` Junio C Hamano
2014-11-13 17:41                   ` [PATCH 2/2] Let deny.currentBranch=updateInstead ignore submodules Junio C Hamano
2014-11-12 11:06         ` Johannes Schindelin
2014-11-10 14:38 ` [PATCH v2 0/2] Support updating working trees when pushing into non-bare repos Johannes Schindelin
2014-11-13 11:03   ` [PATCH v3 0/1] " Johannes Schindelin
2014-11-13 11:03     ` [PATCH v3 1/1] Add another option for receive.denyCurrentBranch Johannes Schindelin
2014-11-13 17:51       ` Junio C Hamano
2014-11-13 19:21         ` Johannes Schindelin
2014-11-13 17:47     ` [PATCH v3 0/1] Support updating working trees when pushing into non-bare repos Junio C Hamano
2014-11-13 19:11       ` Junio C Hamano
2014-11-13 19:18       ` Johannes Schindelin
2014-11-26 20:21     ` [PATCH v4] " Johannes Schindelin
2014-11-26 20:21       ` [PATCH v4] Add another option for receive.denyCurrentBranch Johannes Schindelin
2014-11-26 21:02         ` Junio C Hamano
2014-11-26 22:44       ` [PATCH v5] Support updating working trees when pushing into non-bare repos Johannes Schindelin
2014-11-26 22:44         ` [PATCH v5] Add another option for receive.denyCurrentBranch Johannes Schindelin
2014-12-01  3:18           ` Junio C Hamano
2014-12-01  7:44             ` Johannes Schindelin
2014-12-01 23:49           ` Junio C Hamano
2014-12-02  0:51             ` Junio C Hamano
2014-12-02  8:21               ` Johannes Schindelin
2014-12-02 16:20                 ` Junio C Hamano
2014-12-02 16:51                   ` Johannes Schindelin
2014-12-02 17:23                   ` Junio C Hamano
     [not found] ` <cover.1415630072.git.johannes.schindelin@gmx.de>
2014-11-10 14:38   ` [PATCH v2 1/2] Clean stale environment pointer in finish_command() Johannes Schindelin
2014-11-10 14:41     ` Johannes Schindelin
2014-11-11  3:16       ` Jeff King
2014-11-11 15:55         ` Junio C Hamano
2014-11-12 10:45           ` Johannes Schindelin
2014-11-12 10:52             ` Jeff King
2014-11-12 10:59               ` Jeff King [this message]
2014-11-12 16:17                 ` Junio C Hamano
2014-11-10 21:44     ` Junio C Hamano
2014-11-11  3:11       ` Jeff King
2014-11-10 14:38   ` [PATCH v2 2/2] Add a few more options for receive.denyCurrentBranch Johannes Schindelin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141112105911.GA31608@peff.net \
    --to=peff@peff.net \
    --cc=Johannes.Schindelin@gmx.de \
    --cc=git@vger.kernel.org \
    --cc=gitster@pobox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.