From: Tony Lindgren <tony@atomide.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>,
Pali Roh?r <pali.rohar@gmail.com>,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, khilman@kernel.org,
aaro.koskinen@iki.fi, freemangordon@abv.bg
Subject: Re: N900 modem support in 3.18-rc1
Date: Thu, 13 Nov 2014 09:45:36 -0800 [thread overview]
Message-ID: <20141113174534.GO26481@atomide.com> (raw)
In-Reply-To: <20141113162155.GA8512@xo-6d-61-c0.localdomain>
* Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> Hi!
>
> > > I actually had pm=0 on the command line, but I removed it now, and no
> > > change: [...]
> > >
> > > Let me try with explicit =1. .. aha, that helps. Thanks!
> >
> > mh seems I actually missed to make 1 the default value. I will
> > prepare a patch for that.
> >
> > I assume, that the example ofono commands work for you now?
>
> Yes, it now works great.
>
> > > Do you have an example client that can talk to ofonod?
> >
> > I have not yet played with userland stuff. You could try
> > telepathy-ring, which integrates the ofono into the telepathy
> > framework.
>
> Ok, I took a look, and telepathy-ring is not in debian, and has
> a lot of dependencies.
>
> OTOH ofono seems pretty reasonable. So I played a bit, and result
> is python/pygtk gui which can receive an sms, initiate a call, and
> report missed call. If someone wants to play, source is at
>
> https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
Pavel, care to fill in the the following type patch with some
instructions in the description now that you got it working?
I did not have luck yet when I tried. I got the /dev/cmt/*
entries after adding pm=1 param, but no luck scanning any networks.
Regards,
Tony
8< -----------------
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -88,6 +88,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y
+CONFIG_PHONET=m
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
@@ -158,6 +159,7 @@ CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
+CONFIG_USB_CDC_PHONET=m
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
@@ -197,6 +199,11 @@ CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
+CONFIG_HSI=m
+CONFIG_OMAP_SSI=m
+CONFIG_NOKIA_MODEM=m
+CONFIG_SSI_PROTOCOL=m
+CONFIG_HSI_CHAR=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
@@ -312,9 +319,11 @@ CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_G_NOKIA=m
CONFIG_MMC=y
CONFIG_SDIO_UART=y
CONFIG_MMC_OMAP=y
@@ -359,6 +368,7 @@ CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: N900 modem support in 3.18-rc1
Date: Thu, 13 Nov 2014 09:45:36 -0800 [thread overview]
Message-ID: <20141113174534.GO26481@atomide.com> (raw)
In-Reply-To: <20141113162155.GA8512@xo-6d-61-c0.localdomain>
* Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> Hi!
>
> > > I actually had pm=0 on the command line, but I removed it now, and no
> > > change: [...]
> > >
> > > Let me try with explicit =1. .. aha, that helps. Thanks!
> >
> > mh seems I actually missed to make 1 the default value. I will
> > prepare a patch for that.
> >
> > I assume, that the example ofono commands work for you now?
>
> Yes, it now works great.
>
> > > Do you have an example client that can talk to ofonod?
> >
> > I have not yet played with userland stuff. You could try
> > telepathy-ring, which integrates the ofono into the telepathy
> > framework.
>
> Ok, I took a look, and telepathy-ring is not in debian, and has
> a lot of dependencies.
>
> OTOH ofono seems pretty reasonable. So I played a bit, and result
> is python/pygtk gui which can receive an sms, initiate a call, and
> report missed call. If someone wants to play, source is at
>
> https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
Pavel, care to fill in the the following type patch with some
instructions in the description now that you got it working?
I did not have luck yet when I tried. I got the /dev/cmt/*
entries after adding pm=1 param, but no luck scanning any networks.
Regards,
Tony
8< -----------------
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -88,6 +88,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y
+CONFIG_PHONET=m
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
@@ -158,6 +159,7 @@ CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
+CONFIG_USB_CDC_PHONET=m
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
@@ -197,6 +199,11 @@ CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
+CONFIG_HSI=m
+CONFIG_OMAP_SSI=m
+CONFIG_NOKIA_MODEM=m
+CONFIG_SSI_PROTOCOL=m
+CONFIG_HSI_CHAR=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
@@ -312,9 +319,11 @@ CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_G_NOKIA=m
CONFIG_MMC=y
CONFIG_SDIO_UART=y
CONFIG_MMC_OMAP=y
@@ -359,6 +368,7 @@ CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
next prev parent reply other threads:[~2014-11-13 17:45 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-04 20:51 N900 modem support in 3.18-rc1 Pavel Machek
2014-11-04 20:51 ` Pavel Machek
2014-11-05 1:11 ` Sebastian Reichel
2014-11-05 1:11 ` Sebastian Reichel
2014-11-05 20:31 ` Pavel Machek
2014-11-05 20:31 ` Pavel Machek
2014-11-05 20:37 ` Pali Rohár
2014-11-05 20:37 ` Pali Rohár
2014-11-05 20:39 ` Pavel Machek
2014-11-05 20:39 ` Pavel Machek
2014-11-05 21:06 ` Pali Rohár
2014-11-05 21:06 ` Pali Rohár
2014-11-05 21:06 ` Pali Rohár
2014-11-05 22:03 ` Pavel Machek
2014-11-05 22:03 ` Pavel Machek
2014-11-05 23:45 ` Sebastian Reichel
2014-11-05 23:45 ` Sebastian Reichel
2014-11-06 12:47 ` Pavel Machek
2014-11-06 12:47 ` Pavel Machek
2014-11-06 18:03 ` Sebastian Reichel
2014-11-06 18:03 ` Sebastian Reichel
2014-11-06 22:50 ` Pavel Machek
2014-11-06 22:50 ` Pavel Machek
2014-11-06 23:01 ` Pali Rohár
2014-11-06 23:01 ` Pali Rohár
2014-11-07 7:04 ` Ivaylo Dimitrov
2014-11-07 7:04 ` Ivaylo Dimitrov
2014-11-13 16:24 ` Pavel Machek
2014-11-13 16:24 ` Pavel Machek
2014-11-14 7:04 ` Ivaylo Dimitrov
2014-11-14 7:04 ` Ivaylo Dimitrov
2014-11-14 17:20 ` Sebastian Reichel
2014-11-14 17:20 ` Sebastian Reichel
2014-11-14 17:34 ` Pali Rohár
2014-11-14 17:34 ` Pali Rohár
2014-11-14 22:05 ` Sebastian Reichel
2014-11-14 22:05 ` Sebastian Reichel
2014-11-14 19:54 ` Ivaylo Dimitrov
2014-11-14 19:54 ` Ivaylo Dimitrov
2014-11-14 21:14 ` Pavel Machek
2014-11-14 21:14 ` Pavel Machek
2014-11-14 21:57 ` Sebastian Reichel
2014-11-14 21:57 ` Sebastian Reichel
2014-11-20 10:13 ` voice calls on N900 working (off-line) was " Pavel Machek
2014-11-20 10:13 ` Pavel Machek
2014-11-20 10:17 ` Pavel Machek
2014-11-20 10:17 ` Pavel Machek
2014-11-25 23:21 ` GPRS data on N900 working " Pavel Machek
2014-11-25 23:21 ` Pavel Machek
2015-02-11 18:32 ` Voice calls working on N900 (*) (was Re: N900 modem support in 3.18-rc1) Pavel Machek
2015-02-11 18:32 ` Pavel Machek
2015-02-11 20:56 ` Pavel Machek
2015-02-11 20:56 ` Pavel Machek
2014-11-13 16:21 ` N900 modem support in 3.18-rc1 Pavel Machek
2014-11-13 16:21 ` Pavel Machek
2014-11-13 17:45 ` Tony Lindgren [this message]
2014-11-13 17:45 ` Tony Lindgren
2014-11-13 18:18 ` Aaro Koskinen
2014-11-13 18:18 ` Aaro Koskinen
2014-11-16 10:12 ` Pavel Machek
2014-11-16 10:12 ` Pavel Machek
2014-11-16 12:29 ` Robert Jarzmik
2014-11-16 12:29 ` Robert Jarzmik
2014-11-18 7:42 ` Pavel Machek
2014-11-18 7:42 ` Pavel Machek
2014-11-19 19:01 ` Robert Jarzmik
2014-11-19 19:01 ` Robert Jarzmik
2014-11-14 7:37 ` Pavel Machek
2014-11-14 7:37 ` Pavel Machek
2014-11-14 16:53 ` Sebastian Reichel
2014-11-14 16:53 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141113174534.GO26481@atomide.com \
--to=tony@atomide.com \
--cc=aaro.koskinen@iki.fi \
--cc=freemangordon@abv.bg \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.