diff for duplicates of <20141125182147.GD25249@lukather> diff --git a/a/1.txt b/N1/1.txt index 97043b0..9260503 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -16,7 +16,7 @@ I wonder wether to put URL in the commit log is the right thing though. It's most likely to be dead in a very near future. The cover letter would be a better fit for that. -> Signed-off-by: Hans de Goede <hdegoede@redhat.com> +> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/sun6i-a31s-cs908.dts | 109 +++++++++++++++++++++++++++++++++ @@ -44,7 +44,7 @@ letter would be a better fit for that. > +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts > @@ -0,0 +1,109 @@ > +/* -> + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> +> + * Copyright 2014 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -107,25 +107,25 @@ Shouldn't it be Set Top Box instead? > + bootargs = "earlyprintk console=ttyS0,115200"; > + }; > + -> + soc at 01c00000 { -> + usbphy: phy at 01c19400 { +> + soc@01c00000 { +> + usbphy: phy@01c19400 { > + status = "okay"; > + }; > + -> + ehci0: usb at 01c1a000 { +> + ehci0: usb@01c1a000 { > + status = "okay"; > + }; > + -> + ehci1: usb at 01c1b000 { +> + ehci1: usb@01c1b000 { > + status = "okay"; > + }; > + -> + ohci1: usb at 01c1b400 { +> + ohci1: usb@01c1b400 { > + status = "okay"; > + }; > + -> + pio: pinctrl at 01c20800 { -> + usb1_vbus_pin_csq908: usb1_vbus_pin at 0 { +> + pio: pinctrl@01c20800 { +> + usb1_vbus_pin_csq908: usb1_vbus_pin@0 { > + allwinner,pins = "PC27"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <0>; @@ -133,25 +133,25 @@ Shouldn't it be Set Top Box instead? > + }; > + }; > + -> + uart0: serial at 01c28000 { +> + uart0: serial@01c28000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_a>; > + status = "okay"; > + }; > + -> + gmac: ethernet at 01c30000 { +> + gmac: ethernet@01c30000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac_pins_mii_a>; > + phy = <&phy1>; > + phy-mode = "mii"; > + status = "okay"; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > + }; > + -> + ir at 01f02000 { +> + ir@01f02000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&ir_pins_a>; > + status = "okay"; @@ -166,10 +166,3 @@ Shouldn't it be Set Top Box instead? Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --------------- next part -------------- -A non-text attachment was scrubbed... -Name: signature.asc -Type: application/pgp-signature -Size: 819 bytes -Desc: Digital signature -URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141125/bbfb9e7d/attachment.sig> diff --git a/a/content_digest b/N1/content_digest index d3e887a..be10c4b 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,10 +1,16 @@ "ref\01416747283-13489-1-git-send-email-hdegoede@redhat.com\0" "ref\01416747283-13489-6-git-send-email-hdegoede@redhat.com\0" - "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0" - "Subject\0[PATCH 5/5] ARM: dts: sun6i: Add dts file for CSQ CS908 board\0" + "ref\01416747283-13489-6-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org\0" + "From\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH 5/5] ARM: dts: sun6i: Add dts file for CSQ CS908 board\0" "Date\0Tue, 25 Nov 2014 19:21:47 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" - "\00:1\0" + "To\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0" + "Cc\0Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>" + Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> + devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + " linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" + "\01:1\0" "b\0" "On Sun, Nov 23, 2014 at 01:54:43PM +0100, Hans de Goede wrote:\n" "> The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND,\n" @@ -24,7 +30,7 @@ "though. It's most likely to be dead in a very near future. The cover\n" "letter would be a better fit for that.\n" "\n" - "> Signed-off-by: Hans de Goede <hdegoede@redhat.com>\n" + "> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" "> ---\n" "> arch/arm/boot/dts/Makefile | 3 +-\n" "> arch/arm/boot/dts/sun6i-a31s-cs908.dts | 109 +++++++++++++++++++++++++++++++++\n" @@ -52,7 +58,7 @@ "> +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts\n" "> @@ -0,0 +1,109 @@\n" "> +/*\n" - "> + * Copyright 2014 Hans de Goede <hdegoede@redhat.com>\n" + "> + * Copyright 2014 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -115,25 +121,25 @@ "> +\t\tbootargs = \"earlyprintk console=ttyS0,115200\";\n" "> +\t};\n" "> +\n" - "> +\tsoc at 01c00000 {\n" - "> +\t\tusbphy: phy at 01c19400 {\n" + "> +\tsoc@01c00000 {\n" + "> +\t\tusbphy: phy@01c19400 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tehci0: usb at 01c1a000 {\n" + "> +\t\tehci0: usb@01c1a000 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tehci1: usb at 01c1b000 {\n" + "> +\t\tehci1: usb@01c1b000 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tohci1: usb at 01c1b400 {\n" + "> +\t\tohci1: usb@01c1b400 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tpio: pinctrl at 01c20800 {\n" - "> +\t\t\tusb1_vbus_pin_csq908: usb1_vbus_pin at 0 {\n" + "> +\t\tpio: pinctrl@01c20800 {\n" + "> +\t\t\tusb1_vbus_pin_csq908: usb1_vbus_pin@0 {\n" "> +\t\t\t\tallwinner,pins = \"PC27\";\n" "> +\t\t\t\tallwinner,function = \"gpio_out\";\n" "> +\t\t\t\tallwinner,drive = <0>;\n" @@ -141,25 +147,25 @@ "> +\t\t\t};\n" "> +\t\t};\n" "> +\n" - "> +\t\tuart0: serial at 01c28000 {\n" + "> +\t\tuart0: serial@01c28000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&uart0_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tgmac: ethernet at 01c30000 {\n" + "> +\t\tgmac: ethernet@01c30000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&gmac_pins_mii_a>;\n" "> +\t\t\tphy = <&phy1>;\n" "> +\t\t\tphy-mode = \"mii\";\n" "> +\t\t\tstatus = \"okay\";\n" "> +\n" - "> +\t\t\tphy1: ethernet-phy at 1 {\n" + "> +\t\t\tphy1: ethernet-phy@1 {\n" "> +\t\t\t\treg = <1>;\n" "> +\t\t\t};\n" "> +\t\t};\n" "> +\n" - "> +\t\tir at 01f02000 {\n" + "> +\t\tir@01f02000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&ir_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" @@ -173,13 +179,6 @@ "-- \n" "Maxime Ripard, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - "http://free-electrons.com\n" - "-------------- next part --------------\n" - "A non-text attachment was scrubbed...\n" - "Name: signature.asc\n" - "Type: application/pgp-signature\n" - "Size: 819 bytes\n" - "Desc: Digital signature\n" - URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141125/bbfb9e7d/attachment.sig> + http://free-electrons.com -60492688a1beaad86db81be35fd98f3067dabb9b8462ddfec73b1e0453f741a8 +f217c806ad982a6c70d693e83840224ea05028fa374599dc28e36398924b95e4
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.